C Crane VEC1 Home Long WiFi Receiver System Installation Guide
- October 30, 2023
- C CRANE
Table of Contents
C Crane VEC1 Home Long WiFi Receiver System
PRODUCT INFORMATION
The CC Vector WiFi Repeater is a device that helps boost your existing WiFi signal. It comes with a Super USB WiFi Antenna DX that needs to be mounted vertically. The device has a main USB connector that needs to be plugged into a USB port, while the secondary USB should be left unplugged.
PRODUCT USAGE INSTRUCTION
- Refer to the Quick Start Setup Guide for initial setup instructions.
- Mount the Super USB WiFi Antenna DX vertically for optimal signal strength.
- Add silicone grease to the connection between the Super USB WiFi Antenna DX and the CC Vector WiFi Repeater for additional weather protection.
- Plug in the Super USB WiFi Antenna DX tightly and fully to ensure a good connection.
- Plug the main USB connector into a USB port.
- Leave the secondary USB unplugged.
OVERVIEW
MOUNTING OPTIONS
- Suction Cups for Smooth Surfaces
- Slide suction cups onto antenna from top down.
- Cable Tie
- Place cable tie around pole or tree limb, and at narrowest part of antenna for best stability.
- Hook and Loop Material
- Remove backing from hook and loop material and press into place on antenna and mounting surface.
- Detachable Lanyard
Copyright @2022 by C. Crane, Fortuna, CA 95540 Phone: 1-800-522-8863 Web: crane.com All Rights Reserved. No part of this booklet may be reproduced in any form or means whatsoever without permission in writing from C. Crane.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>