GENERATION LIGHTING 4459293S Syden Wall Instruction Manual
- June 13, 2024
- GENERATION LIGHTING
Table of Contents
GENERATION LIGHTING 4459293S Syden Wall
Product Information
The Syden Wall is a fixture designed for installation on walls. It is intended to be installed using NEC-compliant junction boxes. This product is safety- listed for damp locations, making it suitable for use in areas with moisture. The fixture comes with a diffuser, end caps, shade, bracket, and mounting plate.
Product Usage Instructions
- Install the diffuser onto the channel.
- Attach the end caps to the ends of the shade/channel and secure them together using the shade screws.
- Place the bracket over the shade and channel and secure it using the bracket screw.
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire using a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire using a wire nut.
- Neatly place all the wires into the junction box.
- Place the fixture base onto the mounting plate and secure it in place using the fixture screws.
Note : It is important to follow the applicable installation code and have a person familiar with the construction and operation of the product perform the installation to minimize any risks associated with installation. Please keep these instructions for future reference.
If you need further assistance or have any questions, please contact us at
Generation Lighting
7400 Linder Ave., Skokie, IL 60077
T: 847.410.4400 | F: 847.410.4500
Website: www.generationlighting.com
GENERAL PRODUCT INFORMATION
These fixtures are intended to be installed utilizing NEC-compliant junction
boxes. This product is safety-listed for damp locations. This instruction
shows a typical installation.
CAUTION RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved. Use minimum 90°c supply conductors.
Install the Fixture
1A
TOP VIEW
- Install the diffuser to the channel, install the end caps on the ends of the shade/channel, and secure them together using the shade screws. Install the bracket over the shade and channel using the bracket screw
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the fixture base onto the mounting plate, and secure it in place using the fixture screws.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>