PETZL A30AWA-S Panga Helmet Instruction Manual

PETZL A30AWA-S Panga Helmet

These instructions explain how to correctly use your equipment. Only certain techniques and uses are described. The warning symbols inform you of some potential dangers related to the use of your equipment, but it is impossible to describe them all. Check Petzl.com for updates and additional information. You are responsible for heeding each warning and using your equipment correctly. Any misuse of this equipment will create additional dangers. Contact Petzl if you have any doubts or difficulty understanding these instructions.

Field of application

Personal protective equipment (PPE) for the head, for protection against falling objects. Helmet for climbing, mountaineering, and other vertical sports using similar techniques. Designed specifically for use with groups. Do not use this helmet in activities for which it is not designed. Wearing a helmet can significantly reduce the risk of head injury, but does not ensure protection against all impacts. In a major impact, the helmet deforms to absorb the maximum amount of energy possible, sometimes to the point of breaking the helmet. This product must not be pushed beyond its limits, nor be used for any purpose other than that for which it is designed.

WARNING
Activities involving the use of this equipment are inherently dangerous. You are responsible for your own actions, decisions and safety.

• Read and understand all Instructions for Use.
• Get specific training in its proper use.
• Become acquainted with its capabilities and limitations.
• Understand and accept the risks involved.

Failure to heed any of these warnings may result in severe injury or death. This product must only be used by competent and responsible persons, or those placed under the direct and visual control of a competent and responsible person. You are responsible for your actions, your decisions and your safety and you assume the consequences of same. If you are not able, or not in a position to assume this responsibility, or if you do not fully understand the Instructions for Use, do not use this equipment.

Nomenclature

(1) Shell, (2) Headband, (3) Headband attachment clip, (4) Liner, (5) Headband adjustment system, (6) Chinstrap buckle and adjuster, (7) Headlamp clips. Principal materials: acrylonitrile butadiene styrene (ABS) shell, expanded polypropylene (EPP) liner, polyester straps.

Inspection points to verify

Your safety depends upon the integrity of your equipment. Petzl recommends a detailed inspection by a competent person at least once every 12 months (depending on current regulations in your country, and your conditions of usage). Warning: your intensity of use may cause you to inspect your PPE more frequently. Follow the procedures described at Petzl.com. Record the results on your PPE inspection form: type, model, manufacturer contact info, serial number or individual number, dates: manufacture, purchase, first use, next periodic inspection; problems, comments, inspector’s name and signature.
Before each use
Inspect the condition of the shell and the liner (no cracks or deformation inside or outside the shell…). Check the condition of the straps, the stitching, and the function of the chinstrap buckle. Check the condition of the headband. If any of the following parts, shell, liner or headband needs to be retired, it is possible to replace it. See the list of replacement parts.
Warning : a major impact to the helmet can reduce its protective properties (impact absorption, strength) without leaving visible signs of damage. Retire your helmet after a major impact.

How to put on and adjust the helmet

To ensure adequate protection, this helmet must be adjusted to properly fit the user’s head. See the diagrams on adjustment and the function test. The headband should be removed from the shell, before adjusting it to setting 1 or setting 2. Do not use this helmet if you are unable to adjust it to fit properly. Replace it with a different size or model of helmet.

Precautions for use

• WARNING : this helmet should not be used in situations where there is a risk of the helmet getting stuck (e.g. tree, narrow passage…): danger of hanging and/or strangulation by the chinstrap.
• Do not sit on the helmet, pack it too tightly, drop it, allow it to come into contact with sharp or pointed objects… Do not expose your helmet to high temperatures, for example by leaving it inside a vehicle in direct sunlight.
• When stacking helmets, be sure to fold the headband inside the helmet with the FLIP&FIT system.
• Do not apply paints, solvents, adhesives (except water-based adhesives) to your helmet.
• Certain chemicals, especially solvents, can damage your helmet. Protect your helmet from exposure to these types of chemicals.

Changing replacement parts

Headband removal/installation
Make sure that you hear a click when installing each of the headband attachment clips. The headband (A030BA00) is compatible with the shell of the pre-2021 PANGA (A303XX).

Removal/installation of the liner
To do this step, start by removing the headband.

Additional information

This product meets the requirements of Regulation (EU) 2016/425 on personal protective equipment. The EU declaration of conformity is available at Petzl.com. When to retire your equipment:
WARNING : an exceptional event can lead you to retire a product after only one use, depending on the type and intensity of usage and the environment of usage (harsh environments, marine environments, sharp edges, extreme temperatures, chemicals…). A product must be retired when:

• It is over 10 years old and made of plastic or textiles.
• It has been subjected to a major fall or load.
• It fails to pass inspection. You have any doubt as to its reliability.
• You do not know its full usage history.
•  When it becomes obsolete due to changes in legislation, standards, technique or incompatibility with other equipment… Destroy these products to prevent further use. Icons:

A. Lifetime: 10 years – B. Marking – C. Acceptable temperatures – D. Usage precautions – E. Cleaning/disinfection – F. Drying – G. Storage/transport – H. Maintenance – I. Modifications/repairs (prohibited outside of Petzl facilities, except replacement parts) – J. Questions/contact

3-year guarantee
Against any material or manufacturing defect. Exclusions: normal wear and tear, oxidation, modifications or alterations, incorrect storage, poor maintenance, negligence, uses for which this product is not designed.

Warning symbols

1. Situation presenting an imminent risk of serious injury or death.
2. Exposure to a potential risk of accident or injury.
3. Important information on the functioning or performance of your product.
4. Equipment incompatibility.

Traceability and markings

• Notified body performing the EU type examination
• Traceability: datamatrix
• Diameter
• Serial number
• Year of manufacture
• Month of manufacture
• Batch number
• Individual identifier
• Standards
• Read the Instructions for Use carefully
• Model identification
• Manufacturer address
• Date of manufacture (month/year)

References

• Petzl.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>