anslut 016921 3×2.5 m Mains LED Lights Instruction Manual
- June 6, 2024
- anslut
Table of Contents
anslut 016921 3x2.5 m Mains LED Lights
**Instruction Manual**
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)
Care for the environment!
Must not be discarded with household waste! This product contains electrical or electronic components that should be recycled. Leave the product for recycling at the designated station e.g. the local authority’s recycling station.
Jula reserves the right to make changes. In the event of problems, please
contact our customer service.
www.jula.com
Manufacturer
Jula AB, Box 363, 532 24 SKARA
Distributor
Jula Poland Sp. z o.o., ul.
Malborska 49, 03-286 Warszawa, Polska Jula Norge AS, Solheimsveien 30, 1473
For latest version of operating instructions, see
www.jula.com
2021-07-08
© Jula AB
SAFETY INSTRUCTIONS
- Do not connect the product to a power point while the product is still in the pack.
- Intended for indoor and outdoor use.
- Check that no light sources are damaged.
- Do not connect two or more string lights together electrically.
- No parts of the product can be replaced, or repaired. The whole product must be discarded if any part is damaged.
- Do not use sharp or pointed objects during assembly.
- Do not subject the power cord or wires to mechanical stress. Do not hang objects on the string light.
- This is not a toy. Be careful if using the product near children.
- Disconnect the transformer from the power point when the product is not in use.
- This product must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
- The product is not intended to be used as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING!
The product must only be used when all the seals are correctly fitted.
Symbols
TECHNICAL DATA
HOW TO USE
POSITIONING
- Remove the product from the packaging.
- Place the product in the required location.
- Connect the transformer to the mains.
HOW TO USE
- Connect the transformer to the mains.
- Press the transformer button to switch between the 8 light modes.
Light modes
Documents / Resources
|
anslut 016921 3x2.5 m Mains LED
Lights
[pdf] Instruction Manual
016921, 3x2.5 m Mains LED Lights
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>