VOLTCRAFT 2900836 USB C Double Socke Instruction Manual

VOLTCRAFT 2900836 USB C Double Socke

Specifications

• Model: 2900836
• Input Voltage: 12/24 V DC
• Operating Voltage : 9 – 30 V DC
• Peak Input Voltage: max. 34 V DC (3 – 4 s)
• Standby Current: 5 mA
• Fuse: F10AL 250V 5 x 20 mm
• Approval: EN50498

Item no: 290083

Operating Instructions for download

Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.

Intended use

The product has a built-in USB socket. Use the product to charge and operate compatible USB devices.

Built-in protection mechanisms:

• Fuse
• Reverse polarity protection
• Short circuit protection
• Overvoltage protection
• Low voltage protection
• Overcurrent protection
• Overheat protection

INSTRUCTION

• The product is intended for indoor use only. Do not use it outdoors.
• Contact with moisture must be avoided under all circumstances.
• If you use the product for purposes other than those described, the product may be damaged.
• Improper use can result in short circuits, fires, or other hazards.
• The product complies with the statutory national and European requirements.
• For safety and approval purposes, you must not rebuild and/or modify the product.
• Read the installation instructions carefully and store them in a safe place. Make this product available to third parties only together with the installation instructions.
• All company names and product names are trademarks of their respective owners. All rights reserved.
• USB4®, USB Type-C®, and USB-C® are registered trademarks of USB Implementers Forum

Delivery contents

• Product
• Connection wires
• Installation instructions

Description of symbols

The following symbols are on the product/appliance or are used in the text:

WARNING: The symbol warns of hazards that can lead to personal injury.

Safety instructions

Read the installation instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

User requirements
The product must be installed by a qualified professional who is capable of performing the installation and wiring in compliance with all applicable legal and technical requirements for the installation location. Unsafe installation can result in fire, electric shock, and similar hazards

General

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions that remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications, and repairs must only be completed by a technician or an authorized repair center.

Handling

• Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam, and solvents.
• Protect the product from high humidity and moisture.
• Protect the product from direct sunlight.

Operation

• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  • is visibly damaged,
  • is no longer working properly,
  • has been stored for extended periods in poor ambient conditions or
  • has been subjected to serious transport-related stresses.

Connected devices

• Also observe the safety and operating instructions of any other devices which are con-nected to the product.

Product overview

1. Backlight
2. USB-C® port

Installation

Installation notes
Observe the below instructions when installing and wiring the product:

• Disconnect the power supply before installing and wiring.
• Use the included connection wires if possible. If you use your connection wires, ensure the wire cross-section is sufficient for the currents that will be carried.
• Install a fuse with the appropriate rating between the positive (+) terminal of the product and the positive (+) terminal of the power supply. See “Technical data” for fuse specifications.
• The included positive (+) connection wire is equipped with a fuse.

Technical drawing

Cleaning and care

Important:

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
• Do not immerse the product in water.

1. Clean the product with a dry, fibre-free cloth.

Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

Approval

Input

• Nominal input voltage ………………… 12/24 V/DC
• Operating voltage ……………………… 9 – 30 V/DC
• Peak input voltage …………………….. max. 34 V/DC (3 – 4 s)
• Quiescent current ……………………… 5 mA
• Output
• USB-C® 1 or 2 single output ………. 5 V/DC, max. 3 A, max. 15 W;
  • 9 V/DC, max. 3 A, max. 27 W;
  • 15 VDC, max. 3 A, max. 45 W;
  • 20 V, max. 3 A, max. 60 W
• USB-C® 1 + 2 output …………………. 5 V/DC, max. 30 W (2 x max. 15 W)
• Total output power …………………….. max. 60 W
• Protection mechanisms
• Fuse ………………………………………… Fuse in wire; F10AL 250V 5 x 20 mm (replaceable)
• Low voltage protection ……………….. <6 V/DC
• Overvoltage protection (output)…… Input: >35 V/DC
• Output: >20 V/DC
• Overcurrent protection (output ) …… 3.5 A
• Overtemperature protection ………… 125 °C
• Short circuit protection ……………….. Yes
• Reverse polarity protection …………. Yes

Environment

• Operating temperature ……………… -20 to +80 °C
• Operating humidity …………………… <90 % RH (non-condensing)
• Storage temperature …………………. -20 to +80 °C
• Storage humidity ………………………. <90 % RH (non-condensing)

Others

• Terminals …………………………………. Copper/nickel plated 6.3 mm (1/4″)
• Backlight color ………………………… Blue
• Dimensions (Ø x L )……………………. 28.7 x 62.7 mm
• Weight (approx.) ………………………. 30 g

FAQ

(Frequently Asked Questions)

• Q: Can the product be used with an input voltage other than 12/24 V DC?
  • A: No, the product is designed to operate within the specified input voltage range of 12/24 V DC.
• Q: How often should the product be cleaned?
  • A: It is recommended to clean the product regularly using a soft, dry cloth to maintain its performance.
• Q: What should I do in case of a fuse failure?
  • A: If the fuse fails, replace it with a new one of the same type and rating as indicated in the specifications.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>