logitech ZONE VIBE 130 Wireless Over Ear Headphones User Guide

ZONE VIBE 130 Wireless Over Ear Headphones
User Guide

KNOW YOUR PRODUCT

Front view:

Back view:

Bottom view:

BOX CONTENT

1. Zone Vibe 130 wireless headphones
2. Charging cable
3. USB-C receiver
4. USB-A adapter
5. Travel bag
6. User documentation

POWER ON/OFF

1. Slide the switch in the arrow’s direction to the middle to power on the headphones.
2. Once powered on, the LED light will slightly turn white.
3. There will be a voice prompt that tells you the battery status.

CONNECT YOUR HEADPHONES

a. Connect via USB-C receiver

1. Insert the receiver into the computer USB-C port. Or insert the USB-C receiver with the USB-A adapter to the USB-A port.
2. Zone Vibe 130 is already paired to the receiver it ships with.
3. Once successfully paired, the LED light on the receiver will turn solid white then dim.

b. Connect via BLUETOOTH ®

1. Slide the switch to the bottom in the arrow’s direction for 2 seconds to initiate pairing.
2. The LED light will flash white rapidly.
3. Open Bluetooth® settings on your device.
4. Select Logi Zone Vibe 130 in discoverable devices.
5. Once successfully paired, the LED light will turn solid white.

ADJUSTING HEADPHONES

1. Adjust the headphones by sliding acupressure and down the extended part of the headband.
2. It may be easier to adjust the headphones on your head. Slide the ear cups up and down the headband until they sit comfortably on your ears.

HEADPHONES CONTROLS

UC version:

| Usage| Button| Action
Call controls| Answer/End call| Call button| Short press
Reject call| 1.5 sec. press
Music controls| Play/Pause| Music control button| Short press
Track forward| Double press
Volume| Volume up| “+”| Short press
Volume down| “-“
Connectivity| Bluetooth® pairing| 3-position button| 2 sec. press

Note:

• Media control functionality depends on the type of application.
• Call activities are always the first priority. When two devices are connected, the Bluetooth® connection will be prioritized over the receiver. When two Bluetooth® devices are connected, the last active device will override the other.

Tip: Music EQ controls available on Logi Tune.
MUTE
There are 2 ways to mute your microphone.

Press the button to mute.| Flip up or down the mic boom to mute or unmute.| Voice notifications indicate when the microphone is on/off mute.

HEADPHONES LIGHT INDICATOR

| Category| Status| Light
---|---|---|---
White| Power| Power ON| Turn solid white and then dim
Battery charging| Breathing
Battery fully charged| Solid and then off
Connectivity| Bluetooth® pairing| Fast blinking
Bluetooth® I receiver connected| Turn solid white and then dim
Calls| Active call| Solid
Incoming call| Slow blinking
Red| Calls| Mute| Solid
Power| Low battery (< 10%)| Slow blinking
| Factory reset| Fast blink from red to white for three times then LED turn off

Note:
– User-triggered behaviors, such as Bluetooth® pairing, will be prioritized then revert back to its previous status once the behavior is completed.

RECEIVER LIGHT INDICATOR

UC version

| Category| Status| Light
White| Connectivity| Receiver connecting| Fast blinking
Receiver connected| Turn solid white and then dim
Receiver disconnected| Off
Calls| Active call| Turn solid white and then dim
Incoming call| Repeat “fast blinking 3 times then LED off”
Red| Calls| Mute| Solid
Blue| Connectivity| New device pairing| Fast blinking
New device paired| Solid blue then dim white

CHARGING

To conserve battery life, headphones automatically power off after 30 minutes without usage.
Sleep timer can be adjusted in Logi Tune.
The LED light on the headphones will blink slowly in RED when the battery is lower than 10%.

Charging via USB cable

1. Plug one end of the cable to the USB-C port on the bottom of the ear cup and the other end into the USB-C charging port on your computer.

2. The LED light will start breathing white when charging.

3. The LED light will turn solid white when fully charged.
   – 2 hours will fully charge the battery.
   – 5 minutes will give you 1 hour of playback.
   Note:
   Battery life may vary based on user, environment, and computing conditions.

4. The headphones can be used with the receiver and Bluetooth® paired while charging.

LOGI TUNE
Logi Tune helps boost your headphones performance with periodic software and firmware updates.
It is recommended to update both your headphones and receiver. To do so, download Logi Tune from www.logitech.com/tune

www.logitech.com/tune

ADJUSTING SIDETONE
Sidetone lets you hear your own voice during conversations so you are aware of how loud you are talking. In Logi Tune, select the sidetone feature, and adjust the dial accordingly.
– A higher number means you hear more external sound.
– A lower number means you hear less external sound.
AUTO SLEEP TIMER
By default, your headphones will automatically power off when not in use for 30 minutes. Adjust the sleep timer in Logi Tune. To wake up your headphones, try sliding off/on the power switch again.
RESET YOUR HEADPHONES

1. Power the headphones on.
2. Press and hold the call button and volume ’–’ button for 5 seconds.
3. The LED light will quickly blink from red to white for 3 times and then turns off when your headphones are successfully reset.
4. The headphones will turn off after reset.

DIMENSIONS

Headphones:
Height x Width x Depth: 183.03 x 169.68 x 73 mm
Weight: 0.185 Kg
Ear pad:
Height x Width x Depth: 98.6 x 75.44 x 19.3 mm
Receiver:
Height x Width x Depth: 26.8 x 12.4 x 6.2 mm
Adapter:
Height x Width x Depth: 24.5 x 15.4 x 8.7 mm

SYSTEM REQUIREMENTS
Works with common calling applications across almost all platforms and operating systems.
Works with Windows, Mac, or Chrome-based computers via USB-C, USB-A, Bluetooth® and iOS or Android Bluetooth-enabled devices.

TECHNICAL SPECIFICATIONS

Microphone Type: Dual omni-directional MEMS mics with directional beam forming and DSP
Frequency response (Speaker): 20-20kHz (music mode), 100-8kHz (talk mode)
Frequency response (Microphone): 100-8kHz
Talk time up to 18 hrs
Listen time up to 20 hrs
Bluetooth® version (headset): 5.2
Bluetooth® version (receiver): 5.2
Wireless range: Up to 50 m / 164 ft (open field line of sight)
Cable length (USB C to C charging cable): 4.9 ft (1.5 m)

www.logitech.com/support/zonevibe130
© 2022 Logitech. Logitech, Logi and the Logitech logo are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries and regions. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Logitech is under license. Windows, Mac, Chrome, iOS, Andriod, USB-C and all other trademarks are the properties of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.

References

• Logi Tune - Software App for Webcams, Headsets & Logi Dock

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>