SCHLAGE Encode Smart WiFi Deadbolt User Guide

Quick Start Guide

Parts

Start here!

schlage.com/encode-workswith
Visit: schlage.com/encode-workswith to set up and control your Schlage Encode with your smartphone.

Touchscreen

Communication Icon

• Flashes when the lock is connecting to WiFi to check for updates.

Low Battey Icon

• Flashes after code are entered when the battery is low.
• Solid when the battery is critical. The lock will not work without new batteries.

Programming and Input LED

• Flashes white on every digit that is entered.
• Amber when using manual programming mode.

Home Button and Checkmark Icon

• Turns on the keypad backlight.
• Starts WiFi connection process.
• Checkmark flashes when the code entered is correct.
• Checkmark flashes when manual programming is successful.

Lock Button and “X” Icon

• Locks the lock.
• Turns on the keypad backlight if the lock is locked.
• “X” flashes for the wrong user code.

Tools

Phillips screwdriver Don’t use a power drill!

Steep:1

Remove existing lock.
Remove the entire deadbolt, including the bolt. You may also want to remove the strike. A standard Schlage deadbolt is shown. Check with your specific deadbolt manufacturer if you need help.

Step: 2
Need Help?
Visit: schlage.com/faqs-encode.
Install the bolt. You may have to adjust your bolt length. Make sure the slot in the bolt is centered in the hole.

Steep:3
Need Help?
Trouble installing the strike reinforcer?
Visit: schlage.com/faqs-encode and follow interactive instructions.
Install the strike into the door frame. If you have a window next to your door, you may not be able to use the long wood screws to install the reinforcer.

Steep:4
Is it hard to install the touchscreen? Is the tailpiece not installed correctly? If your through-hole seems too small, you may need to remove the spacer.
Visit: schlage.com/faqs-encode.

Install the touchscreen.
Route the cable through the door BELOW the bolt. Align the tailpiece as shown and push the touchscreen onto the door.

Steep: 5

Phillips screwdriver Don’t use a power drill! You may damage your lock!

Install the backplate.
Route the cable under the bolt and through the hole on the bottom of the backplate. Secure the backplate with screws. Make sure the outside touchscreen is straight before tightening screws all the way.

Steep:6
Connect the cable.
Tuck the cable and connector in the space above the spindle.

Steep: 7

Phillips screwdriver Don’t use a power drill! You may damage your lock!

Secure the lock to the door.
If the bump on the tailpiece doesn’t align with the slot in the back of the inside assembly, make sure your thumbturn is vertical (up and down).

Steep:8
Install batteries and slide the cover on.

That wasn’t so bad, was it?
Your lock is now installed! Remember, you still have to set up your lock to use it.

Steep:9
Set up your lock.

1. Open your door!
2. Enter one of the two default user codes.
3. Your lock will enter a setup routine. When the bolt stops moving, the setup is complete.

Final test!

1. Close your door.
2. Extend and retract the bolt using the inside thumb turn.
3. Make sure the bolt retracts smoothly.
4. Open your door.
5. Extend the bolt using the inside thumb turn.
6. Now enter a user code a the touchscreen.

Need Help?
If the bolt doesn’t extend or retract during testing, visit schlage.com /faqs-encode.

Now that your lock is installed
you can use a smart home system to lock and unlock your door from anywhere and add user codes for guests and household members.
schlage.com/encode-workswith
Visit: schlage.com/encode-workswith for a list of compatible smart home apps that allow you to control your Schlage Encode with your smartphone.

Lock and unlock

To lock your door just tap the lock icon.
You can also lock your door from inside by turning the thumb turn toward the door edge.

To unlock your door enter a user code.
You can also unlock your door from inside by turning the thumb turn away from the door edge.

Questions about your new Schlage Encode Smart WiFi Deadbolt?
Please don’t return it to the store! Let us help you first!
www.schlage.com/faqs-encode

© Allegion 2018 Printed in U.S.A P518-415 Rev.08/18-d

P518-415

Documents / Resources

| SCHLAGE Encode Smart WiFi Deadbolt [pdf] User Guide
BE489WB CAM 619, Encode Smart WiFi Deadbolt, Encode
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>