SILVERCREST SSMC 600 B1 Blender User Guide

SSMC 600 B1 Blender
User Guide

Information about this quick start guide
This document is a shortened print version of the complete operating instructions. This quick start guide does not replace the complete operating instructions, which also contain additional information, for example, on cleaning, troubleshooting, and the warranty.http://www.lidl-service.com
Scan this QR code with your smartphone/tablet. The QR code will take you directly to the Lidl Service page www.lidl-service.com where you can view and download the full version of the operating instructions by entering the article number (IAN) 360503_2010.
WARNING!
Observe the information in the complete operating instructions and the safety instructions to avoid personal injury and damage to property.
The quick start guide is an integral part of this product. Before using the product, please familiarise yourself with all operating and safety instructions. Keep the quick start guide in a safe place and hand over all documents when passing the product on to any future owner/user.

Intended use

• This appliance is intended exclusively for …
• mixing, puréeing, and stirring foods as well as crushing ice cubes,
• use exclusively in normal domestic amounts and only for private use in a domestic environment in dry rooms.

This appliance is not intended for …

• chopping herbs, onions, meat, and hard food components such as nuts, pits, large seeds or stalks, making nut puree,
• the processing of materials that are not foodstuffs,
• commercial or industrial use,
• for use in damp environments or outdoors,
• processing hot/boiling liquids.

Use only the accessories and spare parts that are specified for this appliance. Other parts may not be adequately suitable or safe!

Safety instructions

DANGER! ELECTRIC SHOCK!
► Ensure that the appliance, the power cable, and the power plug are never immersed in water or other liquids.
► Use the appliance only in dry rooms; never use it outdoors or in damp environments.
► Ensure that the power cable never becomes wet or damp during operation. Route the power cable in such a way that it cannot become trapped or damaged in any way.
► Arrange for defective power plugs and/or cables to be replaced as soon as possible by a qualified technician or by our Customer Service Department to avoid the risk of injury.
► Always remove the plug from the power socket after use. Switching off the appliance is not sufficient because the appliance receives power as long as the power plug is
connected to the socket.
► Check to ensure that the appliance is in a serviceable condition before use. The appliance may not be used if it shows signs of damage, especially to the motor block or the blender attachment.
► Remove the plug from the socket immediately if you notice unexpected smells or noises coming from the appliance while it is in use or if there is an evident malfunction.

WARNING! RISK OF INJURY!

► NEVER insert your hand or fingers into the blender, especially when it is in use. The cutting blades are extremely sharp!
► DO NOT remove the lid when the appliance is in operation.
► To ensure you can react immediately in the event of danger, never leave the appliance running unattended.
► Do not insert cutlery items or mixing tools into the blender while the appliance is in use. There is a considerable risk of injury if these come into contact with the swiftly rotating cutting blades!
► Children should be supervised to ensure that they do not play with the appliance.
► Never use the appliance for purposes other than those described in these instructions.
► Risk of injury if the appliance is misused.
► The appliance should always be disconnected from the mains when not supervised and before assembly, disassembly or cleaning.
► This appliance is not to be used by children.
► The appliance and its main cable must be kept away from children.
► This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the safe use of the appliance, and if they are aware of the potential risks.
► Do not allow children to play with the appliance.
► Be careful when handling the appliance. The cutting blades are extremely sharp!
► Take care when emptying the blender! The cutting blades are extremely sharp!
► Take care when cleaning the appliance! The cutting blades are extremely sharp!
► Switch the appliance off and disconnect the plug from the power supply before changing accessories or getting hold of parts that move during operation.
► Always make sure that the blender is switched off before removing the jug from the motor block!
► Use the blender only with the supplied motor block!

CAUTION! MATERIAL DAMAGE!
► Do not use the appliance in direct sunlight or near any heat-generating appliances.
► NEVER fill the blender with boiling liquids or other foods! Allow these to cool to a lukewarm temperature.
► NEVER operate the appliance when it is empty, i.e. without ingredients in the blender attachment.

Package contents

After unpacking, check to ensure all items are available. The package contains:

• Motor block, with power cable and plug
• Blender
• Lid
• Measuring cap
• Quick start guide

Technical data

food-safe.

The CO time (continuous operation time) is the amount of time an appliance can be operated without the motor overheating and becoming damaged. When the specified CO time has been reached, the appliance must be switched off until the motor has cooled down to room temperature.

Setting up

Once all components have been cleaned as described in the section “Cleaning”:
■ Position the appliance so that, …
– that the mains cable passes through the recess at the rear of the appliance,
– the power plug is immediately accessible so that it can be quickly withdrawn in the event of danger,
– that it is stable and not liable to slip, and so that the sucker feet can attach firmly and the appliance cannot tip over due to vibration,
– that the mains cable is not in the working area and thus does not present a risk of being inadvertently snagged and tipping the appliance over.

Operation

WARNING!
► The motor switches off automatically as soon as the blender is removed from the motor block or the lid is opened. In such cases it may be easy to forget that the machine is still switched on. The motor will then start unexpectedly as soon as the blender attachment is fitted or the lid is closed again:
Therefore:
– Do not insert the power plug into the wall socket until the blender is filled and mounted with its lid fitted and closed.
– Before fitting the blender, always check to see that the appliance is switched off or that the power plug has been removed.
– Switch the appliance off first, pull the plug out and wait until the motor has come to a standstill before removing the blender or opening the lid.

Fitting and filling the blender

1. Remove the blender from the motor block in a vertical, upward motion.
2. Remove the lid by rotating it anticlockwise towards position until you can pull it upwards.
3. Fill the blender to at least to the lowest line of the scale and at most to the MAX mark.
4. Press the lid firmly down onto the blender. Close the lid by turning it clockwise to position it until it audibly engages. Ensure that the pouring spout on the blender is closed. The motor cannot start until the lid is fitted flush.
5. Press the measuring cap into the lid as far as the stop.
6. Place the completely filled and closed blender with the handle to the right on the motor block. Make sure that the arrow on the blender points to the arrow on the motor block. Turn the blender slightly back and forth if it does not immediately sit properly. The motor cannot start until the blender is fitted flush to the motor unit.

Selecting the speed setting
Once the blender is filled and sitting completely closed on the motor block, you can switch on the appliance.
Set the switch to …
■ Level 1 – 3
for liquids or soft foodstuffs, for mixing, blending, and stirring
■ Level 3 – 5
for more solid foods or for chopping
■ Level P (pulse function)
for short, powerful impulse operation, e.g. for crushing ice cubes or when cleaning. To prevent overloading the motor, the switch does not lock in this position. Therefore, hold the switch in this position for short periods only. Once the blender is filled and sitting completely closed on the motor block, you can switch on the appliance. Set the switch to
■ Level 1 – 3
for liquids or soft foodstuffs, for mixing, blending, and stirring
■ Level 3 – 5
for more solid foods or for chopping
■ Level P (pulse function)
for short, powerful impulse operation, e.g. for crushing ice cubes or when cleaning. To prevent overloading the motor, the switch does not lock in this position. Therefore, hold the switch in this position for short periods only.
NOTE
► Fill the blender with a maximum of 250 ml of ice cubes. Otherwise, the ice cubes will not be crushed optimally.

Filling while in use

WARNING!
► If you want to add additional foods during operation, use only the measuring cap provided for this purpose. Do NOT open the lid.
► Do not insert cutlery items or mixing tools into the blender while the appliance is in use. There is a considerable risk of injury if these come into contact with the swiftly rotating cutting blades!

To add more food while the appliance is in use, …

1. Remove the measuring cap from the lid.
2. Add the ingredients.
3. Press the measuring cap back into the lid.

Removing the blender
If you want to remove the blender from the motor block:

1. Always start by setting the switch to the off position (“0”) and pulling out the mains plug.
2. Wait until the motor has come to a complete standstill before lifting the blender off the motor block. Remove the blender from the motor block in a vertical, upward motion.

Cleaning
DANGER! ELECTRIC SHOCK!

Before starting to clean the blender and its components:
► Ensure that the motor is switched off and the power plug removed from the socket.
► Do not immerse the motor block in water or other liquids. This could result in you receiving a fatal electric shock and causing damage to the appliance.
► Never open the housing of the appliance. Otherwise, there is a risk of a fatal electric shock.

WARNING! RISK OF INJURY!
► Handle the cutting blades with extreme caution. They are extremely sharp!
CAUTION! PROPERTY DAMAGE!
► Do not use solvents or abrasive cleaners on the plastic surfaces, they could be damaged by them.
Cleaning the blender
■ To prevent injuring yourself on the cutting blades, clean the blender only with a long-handled washing-up brush.
■ Clean the measuring cap and the lid in a mild soap solution. You can remove the rubber seal to clean the blender lid by hand. Make sure that the rubber seal is correctly reattached before you use the lid again.

NOTE
You can also clean the lid together with the rubber seal, the measuring cap, and the blender attachment in the dishwasher along with the cutting blades. We recommend not removing the rubber seal when cleaning in the dishwasher, as it might otherwise deform. If possible, place the plastic parts in the upper basket of the dishwasher and make sure that they are not jammed. Otherwise, they could become misshapen or suffer from stress cracks.

• If you clean the blender directly after use, you can often achieve a satisfactory and hygienic level of cleaning by doing the following: Fill the blender attachment with 750 ml of water and add a drop of washing-up liquid. Close the lid and fit the blender attachment onto the motor unit. Insert the mains plug into the socket and activate the pulse function a few times so that the cutting blades plow through the water at maximum speed. Afterward, rinse the blender attachment with plenty of clean water to remove any washing-up liquid residues.
• Dry all parts thoroughly before reusing or storing them.
• If this does not remove the dirt, you can remove the lower plastic part of the blender attachment with the cutting blades from the glass part of the blender:

1. Remove the blender from the motor unit. For better stability, remove the lid by turning it anticlockwise towards position until you can pull it off upwards.
2. Turn the appliance upside down and turn the plastic part of the blender anticlockwise so that it can be detached from the glass part of the blender attachment.
3. Clean both parts in a mild soap solution or in the dishwasher.
4. You can carefully remove the sealing ring from the plastic part if necessary. Clean in mild soapy water and rinse with clear water.
5. Dry all parts thoroughly before reassembling them.
6. If necessary, reinsert the sealing ring into the plastic part correctly. Then place the plastic part of the blender back on the glass part of the blender and turn the plastic part clockwise.

Cleaning the motor block

• If necessary, clean the motor unit and its mains cable with a damp cloth. For stubborn stains, apply a mild detergent to the cloth and wipe off with a cloth moistened only with water. Dry everything well afterward.
• When cleaning, always check that the contact switch in the fitting for the blender is not blocked by soiling residues. If you cannot dislodge any blockages with the corner of a piece of paper, make contact with Customer Services. Do not use any hard objects, these could damage the contact switch.

Storage

1. If you do not intend to use the blender for an extended period, clean it thoroughly (see chapter “Cleaning”).
2. Wrap the power cable around the cable retainer on the base of the motor block.
3. Store the blender in a cool and dry location.

Disposal
Do not dispose of the appliance in your normal domestic waste. This product is subject to the provisions of the European Directive 2012/19/EU.
Dispose of the appliance via an approved waste disposal company or your municipal waste disposal facility. Please comply with all applicable regulations. Please contact your waste disposal facility if you are in any doubt.
Your local community or municipal authorities can provide information on how to dispose of the worn-out product.
The product is recyclable, subject to extended producer responsibility, and is collected separately.
Note the labeling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labeled with abbreviations (a) and numbers (b) with the following meanings: 1–7: Plastics, 20–22: Paper and cardboard, 80–98: Composites.
**** The packaging is made from environmentally friendly material and can be disposed of at your local recycling plant.

Service
Service Great Britain
Tel.: 0800 404 7657
E-Mail: kompernass@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR / Min., (peak))
(0,06 EUR / Min., (off peak))
E-Mail: kompernass@lidl.ie
IAN 360503_2010
Importer
Please note that the following address is not the service address. Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com

References

• Kompernaß - Online shop for accessories and spare parts
• de/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>