BRESSER 1251052 10×50 Binoculars Instruction Manual

: October 27, 2023
: BRESSER

Table of Contents

1251052 10×50 Binoculars
General Safety Information
List of Parts
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

1251052 10×50 Binoculars
Instruction Manual

1251052 10×50 Binoculars

|
---|---
|
|

Dear customer,
This instruction manual was created for various models in our series of binoculars. Pages 2-7 present the relevant features in pictures. Depending on the model you have purchased, this chapter of the manual covers the binoculars in full or in part. As a result, please pay attention to the letters ( P R or C ) to make sure that a chapter applies to your model.
Please read this manual carefully and completely before using the binoculars.
Your
BRESSER Team
P= Porto prism model.
R= Roof prism model.
C= Compact model.

General Safety Information

RISK of physical injury!

Never look through this device directly at or near the sun. There is a risk of BLINDING YOURSELF!
Children should only use this device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children. There is a risk of SUFFOCATION.
Fire/Burning RISK!
Never subject the device – especially the lenses – to direct sunlight. Light ray concentration can cause ﬁres and/or burns.
RISK of material damage!
Never take the device apart. Please consult your dealer if there are any defects. The dealer will contact our service center and send the device in for repair if needed. Do not subject the device to temperatures exceeding 60°C!

List of Parts

Centre axle
a Twist-up eyecups or b Rubber eyecups
Diopter adjustment
Body of the binoculars
Lens tube
Central focusing wheel
Eyepiece
Objective lens
Threaded tripod connection
Image circle with correctly set eye distance

Eyepieces for spectacle wearers P R C
Depending on the model, your binoculars are equipped with either twist-up eyecups (2a) or rubber eyecups (2b). Since there is a larger distance between the binocular eyepiece and the pupil for those wearing glasses, both eyecup varieties can be adjusted individually. Twist-up Eyecups (2a) Screw in the twist-up eyecups (2a) to use the binoculars while wearing glasses. If you are not wearing glasses, unscrew the eyecups to achieve the required distance from the pupils. OR.
Rubber Eyecups (2b) To use the binoculars while wearing glasses, turn the rubber eyecups (2b) towards the sides and down. If you are not wearing glasses, leave the eyecups in the upright position to achieve the required distance from the pupils.

Adjusting the eyepiece distance P R C
The distance between the eyes differs between individuals. To achieve perfect interaction between your eyes and the eyepieces of your binoculars set the angle at the center of the binoculars (1) so that you see a circular image (10). Note this setting for later use
Adjusting the focus P R C
Look through your binoculars with your right eye closed. Now adjust the image for your left eye using the center wheel (6) until it is sharp and clear. Close your left eye and adjust the image for your right eye using the diopter ring (3) until it too is sharp and clear.
Mounting the binoculars on a tripod P R
Your binoculars have a threaded tripod connection (9) built in. The required tripod adapter is available as an optional accessory (Art. No. 19-16000 or 19-16500). With this accessory, you are able to mount your binoculars on a tripod with a DIN mounting thread (e.g. Art. No. 49-22100).
TIPS on cleaning
Lenses (eyepieces and/or object lenses) should be cleaned with a soft, lint-free cloth (e.g. microbrew) only. Do not use excessive pressure – this may scratch the lens. Dampen the cleaning cloth with a spectacle cleaning ﬂuid and use it on very dirty lenses. Protect the device against dirt and dust. Leave it to dry properly after use at room temperature. Then put the dust caps on and store the device in the case provided. Errors and technical changes reserved.
Bressler GmbH
Gutenbergstr. 2
DE-46414 Rheed
Germany
www.bresser.de
service@bresser.de