tp-link Festa F41 Ceiling Mount Access Point User Guide

tp-link Festa F41 Ceiling Mount Access Point

Product Usage Instructions

Regulatory Compliance:

Ensure the device complies with FCC part 15 standards and CEMark Warning guidelines for proper operation.

EU Declaration of Conformity:

The device complies with essential EU directives. Refer to the original Declaration of Conformity on the TP-Link website for more details.

RF Exposure Information:

The device meets EU requirements on exposure to electromagnetic fields. Maintain a distance of 20cm from the body for compliance.

UKCA Mark & National Restrictions:

The device is compliant with UK regulations and must be used indoors in Great Britain.

Canadian Compliance Statement:

Follow radiation exposure limits and maintain a minimum distance between the device and the body during operation.

Korea Warning Statements:

Refer to the NCC Notice & BSMI Notice for specific guidelines on using the device in Korea.

Safety Information:

Avoid exposing the device to water, fire, humidity, or hot environments to ensure safe operation.

FAQs

Q: Can the device be used outdoors?

A: No, for models Festa F52, Festa F54, Festa F61, and Festa F65, the device should only be used indoors in Great Britain.

Q: What should be done if there is radio interference?

A: If radio interference occurs in a domestic environment, take adequate measures as required to address the issue.

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed
• The adapter shall be installed near the equipment and shall be easily accessible.
• Use only power supplies that are provided by the manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
• Operating Temperature: 0℃ ~ 40℃ (32 ℉ ~ 104 ℉ )
• This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Note: The Equipment marking is at the bottom/back of the device. Symbols may vary from product.

Mounting Requirements

For safety, we recommend you use the original screws in the package when mounting. The following are alternatives to mount the device on the wall:

• (For Festa F41) Use 3 screws which comply with ANSI B1.1 4# or 6# standard and are longer than 7.5 mm.
• (For Festa F52 / Festa F54) Use 3 screws which comply with ANSI B1.1 4# standard and are longer than 7 mm.
• (For Festa F61 / Festa F65) Use 4 screws which comply with ANSI B1.1 4# standard and are longer than 15 mm.

FCC Compliance Information Statement

• Product Name: Ceiling Mount Access Point
• Model Number: Festa F41 / Festa F52 / Festa F54 / Festa F65

I.T.E. Power Supply

| T090060-2B1 (For Festa F41) T240050-2-POE (For Festa F52) T480050-2-POE (For Festa F54) T120100-2B1 (For Festa F61) T120120-2B4 (For Festa F65)

• Responsible party:
• TP-Link USA Corporation
• Address: 10 Mauchly, Irvine, CA 92618
• Website: https://www.tp-link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E-mail: sales.usa@tp-link.com
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
3. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
4. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, have determined that the equipment shown above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made to the equipment and the equipment is properly maintained and operated.

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY (the maximum transmitted power)

• For Festa F41:
• 2412MHz – 2472MHz(20dBm)
• For Festa F52 / Festa F54 / Festa F61:
• 2412 MHz – 2472 MHz (20dBm)
• 5150 MHz – 5250 MHz (23dBm)
• 5250 MHz – 5350 MHz (23dBm)
• 5470 MHz – 5725 MHz (30dBm)
• For Festa F65:
• 2402 MHz-2480 MHz (10dBm)
• 2412 MHz – 2472 MHz (20dBm)
• 5150 MHz – 5250 MHz (23dBm)
• 5250 MHz – 5350 MHz (23dBm)
• 5470 MHz – 5725 MHz (30dBm)

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.
The original EU Declaration of Conformity may be found at
https://www.tp-link.com/en/support/ce/.

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device is used at 20cm from your body.

National Restrictions

• For Festa F52 / Festa F54 / Festa F61 / Festa F65:
• Frequency band: 5150 – 5250 MHz: Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure, or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.
• Frequency band: 5250 – 5350 MHz: Indoor use: Inside buildings only. Installations and use in road vehicles, trains, and aircraft are not permitted. Outdoor use is not permitted.
• Frequency band: 5470 – 5725 MHz: Installations and use in road vehicles, trains, and aircraft and use for unmanned aircraft systems (UAS) are not permitted.

UK Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at
https://www.tp-link.com/support/ukca

Canadian Compliance Statement

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Caution

1. For Festa F52 / Festa F54 / Festa F61:
2. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong.

For Festa F65:

1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong. DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 21cm (for Festa F65) / 20cm (for other models)

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)
between the radiator & your body.

References

• Link: Simple, secure one-click payments
• CE Regulatory Compliance | TP-Link
• Regulatory Compliance | TP-Link
• WiFi Networking Equipment for Home & Business | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>