camry CR 4470 Vacuum Packing Machine User Manual

camry CR 4470 Vacuum Packing Machine

PRODUCT OVERVIEW

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ

CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different, if the device is used for commercial purpose.

1.  Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
3. The applicable voltage is 220-240V, ~50Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
4.  Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
5. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
6.  After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
7. Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
8. Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
9. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
10. Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
11. Never use the product close to combustibles.
12. Do not let cord hang over edge of counter or touch hot surfaces.
13.  Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
14.  In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
15. If the device utilises a power adaptor, do not cover it, because this can cause a dangerous temperature rise and can damage the device. Always connect the power adaptor cable to the device, and then connect the power adaptor to the power socket. Never touch the appliance with wet hands.
16.  Never touch the appliance with wet hands.
17. Use only the original accessories or recommended by the manufacturer.
18.  Use the device only for its intended purpose. Do not use outside. Protect against moisture.
19. Do not underlay hands during you close the device.
20.  Do not use flammable objects.
21. The butt welding machine is not suitable for packing liquids.

DESCRIPTION OF THE DEVICE

1. Product type setting
2. Seal control button
3.  Button for opening the cover
4. . Suction surface
5. Sealing sponge
6. Suction nozzle
7.  Bring to standstill key
8.  Hose for evacuation of air from vacuum containers
9.  Air extraction button
10. Cover lock
11.  Welding strip
12. Seal
13. Button for air extraction from the vacuum tank
14. Adjusting the suction speed

USE OF THE DEVICE

1. Place the foil bag on the suction surface (6) so that it does not rise above the nozzles (10) – as shown in figure A.
2. Close the lid and press the button (2) – as shown (B).
3. Press the buttons to open the cover (4).
4.  Put the items in the bag. Place the other side on the suction surface (6).
   By pressing the button select the type of product (1):

• Dry – dry
• Moist – moist 5. Press the button (13) to set the speed of the air suction:
• Normal – normal speed
• Gentle – low speed (gentle) 6. Press the button (3) to begin vacuum welding

Extraction of air from external vacuum containers/bags

The set includes a tube (14) for sucking air from vacuum containers

1.  Connect the container (not included) with the suction nozzle (10) using the tube (14).
2. Press and hold button (11) continuously until you find that the vacuum is sufficient
3. Take your finger off the button (11), disconnect the device and the external vacuum container.

NOTE: when extracting air from external vacuum containers, do not close the cover to avoid deformation of the gasket (9).

CLEANING AND MAINTENANCE

1. Before cleaning, make sure that the device is connected to power.
2. During cleaning, never immerse the appliance in water, only wipe it with a damp cloth.

Technical specifications:
Welding together: 6-10 sec. Vacuum: -0.8 bar Power: 110W
Voltage: 220-240V ~50Hz

DISPOSAL

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.

References

• AdlerEurope

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>