PNi IP649 Video Surveillance Camera User Manual

PNi IP649 Video Surveillance Camera User Manual

USER MANUAL PNI IP649 1080P SURVEILLANCE CAMERA

1. PRODUCT INTRODUCTION AND MAIN FEATURES:

PNI IP649 product is a 2MP IP camera intended for video/audio surveillance and remote monitoring of outdoor locations. It connects to the Internet by cable or Wireless in order to remotely transmit in Realtime video to dedicated app on your smartphone anytime and anywhere. It can also save recordings locally on microSD card inside ( sold separately). The camera also supports Motion detection alarm, recording and mobile push notifications and much more other functions.

2. CAMERA INSTALLATION

Important conditions:
– Connect camera to a 230V power supply using power adapter from package;
– First configuration of camera should be made with camera close to the Internet source / Router device;
– If you need local recording, install a maximum 128 GB TF microSD card ( sold separately) in camera, by removing back panel ( one screw ).

Search for “Tuya Smart” app for iOS/Android Smartphones in App Store/Google Play store, or scan the below QR code to download and install dedicated app:https://smartapp.tuya.com/tuyasmart

3. REGISTER / LOG IN WITH EXISTING ACCOUNT

3.1 Register

If you don not have a Tuya App account yet, you can register an account or log in via personal e-mail or personal phone number using a verification code procedure. Please read and follow next steps for the description of registration process:

If you have already registered an account, you can skip the creating a new account, click “Log in with existing account”, enter the log in page.
(1) The system automatically select the current Country/Region, or you can manually select the Country/ Region.
(2) Enter your registered e-mail address or mobile number enter your password to log in the system. If your phone has installed WeChat App or QQ App, click WeChat/QQ icon in the log in with social media account area. After accessing the authorization page, and filled in received code from your e-mail/phone log in the system.

4. ADD DEVICE

4.1 QR code net-pairing (Recommended)

WARNING: The product only support 2.4GHz Wi-Fi network. It does not support 5GHz Wi-Fi network. Before configuring Wi-Fi, please check and set / split the 2 Wireless networks from router parameter settings with your network administrator. You The Wi-Fi password should not contain special characters of ~!@#$%^&*(). When configuring Wi-Fi, make sure your router, mobile and device are as close as possible for a quick configuration of the device. Connect smartphone to this Wi-Fi 2.4 Ghz network router with internet access. Activate location from phone if not activated already.

• App supports QR code net-pairing and Wi-Fi connection. You can choose to add device by other options.
• Power On the camera, and you can hear the broadcast “Wait for WiFi config”, (if you heard nothing at all, please click and hold “reset” button for 20 seconds to restore factory settings).
• When the mobile phone connecting to Wi-Fi, click “Add Device” or “+” icon (figure 1) on the Home screen of the App, select “Security & Sensor”(figure 2) “Smart Camera”, click “next step” (figure 3).

• Hold the mobile phone screen in the front of the camera (figure 5), the distance between the two should be 15 to 20 cm. (figure 6) Try not to shake the mobile phone during the scanning.

• When you hear “Connect Router”, click “Connect Internet”, and wait for connecting (figure 7).
• Device added successfully (figure 8), you can choose the device name and room scene.

4.2 QR WIFI Fast Connection

Distribution Network can be connected according to the above steps, skipping Fig. 5 and Fig. 6.

5. FUNCTION DESCRIPTION

Real-time preview interface

1. Setting & Management
2. Wi-Fi signal strength
3. Sound switch
4. SD/HD
5. Full screen
6. Screenshot
7. Voice chat
8. Record live view
9. Playback of video
10. Not available for this model.
11. Motion detection alarm (abnormal report notification through intelligent detection of anomaly in home. You can go out to work and play confidently. To set the alarm level according to the camera’s filed of view can make the alarm more accurate)

6. CLICK ” 1 ” IN THE UPPER RIGHT CORNER OF THE CONTROL PAGE FOR THE

MANAGEMENT AND SETTING OF THE DEVICE.

• Device Name – can modify the device name and device location;
• Device Information – to view: Device ID, Wi-Fi signal strength, IP address, Mac address, Device time zone.
• Tap-to-Run and Automation – View automations and sceneries created for this device
• Third Party Supported – Compatible smart services
• Basic Settings – Basic settings of camera
• IR Night Vision – Settings for IR function
• Detection Alarm Settings – can set the motion detection switch, motion detection alarm sensitivity
• Storage settings – Shows microSD card information’s, and settings for Local Recording mode.
• VAS – Value-added service : you can purchase separately video cloud storage service for this camera for monthly fee (optional according to customer needs)
• Offline Notification – Activates an alarm is camera goes Offline
• Share Device – can share this device to other people, enter the people’s e-mail or mobile phone number; (Note: the entered e-mail / mobile phone number should be registered with a Tuya App account).
• FAQ & Feedback – Questions and solutions for any problems with product behaviour.
• Firmware Information – Support OTA Remote Upgrade (Do not disconnect during upgrading).

7. CLICK “ME” ON THE HOME SCREEEN OF TUYA APP FOR MORE SERVICES

1. Home Management
2. Message Center
3. FAQ & Feedback
4. More Services – Free Services: IFTTT , Google Assistant, Alexa, etc; – Value-added Services : you can check the purchasing record of purchased value-added services: Cloud Storage for Cameras, AI Filtered Notifications etc;
5. Settings and information’s for your Tuya app account: Sound, Notifications, Network, Cache

8. FREQUENTLY ASKED QUESTIONS

• Q:Fail to add device during net-pairing?
  • A:Please make sure the mobile phone and device are connected to 2.4GHz router. Make sure you have a 2.4 Ghz WiFi Network with your network administrator and if the Wi-Fi password entered is correct.
• Q:Still fail to add device after re-scanning?
  • A:If fail to add device, it is recommended to restart the device or power off the device, and try again.
• Q: The device cannot preview?
  • A:Check for weak Wi-Fi signal. You can place the camera closer to the router. If it still doesn’t work, reset the device, and add it again.
• Q:Why the device is still on the list after resetting the device?
  • A:The device resetting only resets the camera’s network configuration and cannot change the configuration on the App. You must log in the App to delete the camera from the list.
• Q:How to connect the camera to another router?
  • A:First log in the App to delete and reset the device, and configure the device again through the App.
• Q:Why the device cannot identify SD card?
  • A:It is recommended to insert and remove the SD card after power off the device. Check if the SD card is under normal service conditions and the format is FAT32. The App shall suggest “”could not find SD card”” under unstable network of the mobile phone or the device.
• Q:The device is online and has an alarm event, but the mobile phone cannot receive the information?
  • A:First confirm that App allows notification in the settings of your mobile phone.

Under normal circumstances, when an anomaly is detected, a message will appear in the notification bar of your mobile phone. Your should set a notification sound or vibration in your mobile phone. In addition, when viewing real-time video in the App you cannot receive alarm from the camera being viewed. Because the device default function the camera being viewed indicating that the user is focusing on the monitoring video, and there is no need for an alarm. Using the advanced intelligent alarm push algorithm to ensure that the alarm message will not be frequently, but the camera will record all the alarm messages and videos.

9. PRODUCT SPECIFICATIONS

EU Simplified Declaration of Conformity
SC ONLINESHOP SRL declares that PNI IP649 1080P surveillance camera complies with the Directive EMC 2014/30/EU, Directive ROHS 2011/65/EU and RED 2014/53/UE. The full text of the EU declaration of conformity is available at the following Internet address: https://www.mypni.eu/products/7393/download/certifications

References

• mypni.eu/products/7393/download/certifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>