ROVUS CY101 Cordless Portable Fan User Manual

: June 6, 2024
: ROVUS

Table of Contents

ROVUS CY101 Cordless Portable Fan
Instruction
BEFORE USE
CHARGING
USAGE
CLEANING AND MAINTENANCE
**Maintenance
TROUBLESHOOTING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ROVUS CY101 Cordless Portable Fan

ROVUS-CY101-Cordless-Portable-Fan-
image

Instruction

Please read this manual thoroughly before using it and save it for future reference.

WARNINGS

This device can be used by children aged 8 years and above as well as by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards Children shall not play with the appliance. Cleaning and user maintenance should not be done by children unless they are older than 8 and supervised.
Children must be supervised not to play with this
This device is intended for household, indoor and dry use
Before use, place the product on hard, flat, stable, and dry
If the device is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use
Do not attempt any modification or repair by yourself and ensure that any repair is conducted only by an appropriately qualified technician.
If the supply cord is damaged, it must be replaced immediately by authorized and qualified
person only.
Use care when operating the device by keeping all foreign objects, fingers, body parts, hair, loose clothing, and jewelry away from openings.
Plug-in a power supply that corresponds to the rated one on the product
This device should never be switched on while un/folding or during
Never use the device unless it is fully
Regularly remove blockages caused by dust, fluff, and hair because they greatly reduce the device’s suction power and/or general performance.
Although the product has been checked its usage and consequences are strictly user responsibility.

PARTS (see PICTURES, Picture 1): A = cover release tab

B = removable cover
C = telescopic arm
D = lock
E = fan
F = speed and battery power indicator
- = power button/low speed
- = medium speed
- = high speed
G = USB socket
H = power cable

BEFORE USE

The device can be placed in two positions (see PICTURES, picture 2):

Table fan position (1)
Floor fan position (2)

TABLE POSITION (see PICTURES, picture 3):

Step 1: Hold the base of the fan down with one hand and lift the top up with the other hand (1).
Step 2: Bring the arm up (2).
Step 3: Lock the arm by sliding the lockdown – “click” sound(3).

FLOOR POSITION (see PICTURES, picture 4):
Extend the telescopic arm to the desired height.

CHARGING

Option 1: Insert a power cable with one end into a USB socket and the other end in the charger (not included) before plugging it into the power supply.
Option 2: Insert a power cable with one end into a USB socket and the other end into a USB port (of computer, power bank, or similar).

Once plugged in, charging will start automatically. Indicator lights will display the charging process by blinking alternatively. The fan can operate while charging.

Less then 39 % battery power remaining: indicator lights will cycle through Low, Medium, and High while charging.
40 % to 60 % charged: indicator lights will cycle through Medium and High, while the light for Low will remain solid.
70 % to 90 % charged: indicator lights for High will blink, while the lights for Low and Medium will remain solid.
Fully charged: all 3 indicator lights will remain solid.

USAGE

Step 1: Press and hold the power/1 button for three seconds. The fan will switch on to low-speed mode. This is the default mode. The LOW indicator will briefly illuminate (see picture 5.1) before battery power indicators will turn on (see PICTURES, picture 6).
Step 2: Press the 2 buttons to switch to medium speed mode(MED indicator light will briefly illuminate).
Step 3: Press the 3 buttons to switch to high-speed mode (HIGH indicator light will briefly illuminate).
Step 4: Press and hold the power/1 button for three seconds to turn the fan off (see PICTURES, picture 5.2).

Battery power chart (see PICTURES, picture 6)
While the fan is on, 3 LED indicator lights will display the current battery power.
NOTE: The fan will automatically shut down when the battery power runs out.

CLEANING AND MAINTENANCE

Cleaning

Step 1: To remove the cover, push the cover release tab in a counterclockwise direction to the unlocked position (see PICTURES, picture 7.1).
Step 2: Clean off the dust cover. The cover is washable. Use a soft, damp cloth to clean the inside of the fan (see PICTURES, picture 7.2). Dry thoroughly before further use or storage.
Step 3: Align the grooves on the fan and the cover. Place the cover back on. Make sure the release tab is aligned with (unlocked) (see PICTURES, picture 7.3).
Step 4: Push the cover release tab in a clockwise direction to slide it into the locked position (see PICTURES, picture 7.4).

**Maintenance

** When done using the fan, make sure to return it to its folded position.

Step 1: Unlock the arm by sliding the lock-up (see PICTURES, picture 8.1).
Step 2: Fold the arm by pressing it down (see PICTURES, picture 8.2).
Step 3: Fold the top part of the fan (see PICTURES, picture 8.3).
NOTE: Always make sure to push the lock all the way up to fully unlock the arm, to avoid damage to the unit.

TROUBLESHOOTING

If the device is not working, check if the battery is fully charged. Charge it if needed.
If the device is still not working, check if it is positioned correctly, on hard, flat, stable, and dry surfaces.