GEREE Q8 Wireless WiFi Video Doorbell Camera User Manual

GEREE Q8 Wireless WiFi Video Doorbell Camera

Warranty Service

Thanks for your shopping and trust.
We are keeping to optimize product and improve our lifetime customer service to offer you a better shopping experience. If you have any problems, please feel free to send us an E-mail. We will solve your problems within 24 hours. Besides, your advice or suggestions will be much appreciated and welcomed.

Features

1. Motion Sensor
2. Wide-angle Lens
3. Hidden Infrared Lights
4. Light Sensor
5. Microphone
6. Doorbell Button
7. Indicator Lights
8. Speaker
9. Micro USB Port (Battery Charging)

Indicator Light

Indicator light flashing RED
The device is reconnecting to the WIFI network. Please wait.

Indicator light flashing RED and BLUE alternately
Low battery. Please recharge your batteries.

In the box

Charge batteries

1. Remove the battery tab.
2. Insert 18650 batteries positive end facing down, as shown on the device. Rechargeable 18650 Battery
3. Fully charge batteries by connecting your device to a USB charger using a Micro USB cable. It takes about 14 hours for batteries to fully charge.

WARNING: Lots of events
If your device is capturing a number of events every day, you might need to recharge your battery sooner. Plus, the battery is also drained each time you use the Live View to look or speak through your doorbell. To prevent excessive events, you can adjust your motion settings to a lower sensitivity.

Set up your Video Doorbell
Connect your phone with the same 2.4 G WIFI network you are to connect your camera to. The camera only works with 2.4G Wi-Fi. does not support SG.

Scan the QR codes below or search for Aiwit on the Apple app store or Google Play to download the app. The app will walk you through setting up your doorbell

Step 2
Open the Aiwit app on your cellphone. Tap Log in/ Sign up. Then tap sign up.

Step 3
Enter your email and password , then tap Sign up.

Step 4
You will receive an email with the confirmation code . Please enter the code and tap Confirm.

Step 5
Enter your email and password, then tap Log in.

Step 6
Tap+.

Step 7
Tap Doorbell Scan and select video doorbell . Step 8
Press and hold the device button for 8 seconds until the light is flashing red.
Tap Next.

Step 9
Tap Yes

Step 10
Name your doorbell. Find or enter the name of your WIFI network and enter the WIFI password.
Tap Next.

Step 11
Scan the QR code using the doorbell camera Keep devices 4 inches (10 cm) apart.

Step 12
If pairing is successful, you Will See a message as below.

Step 13
After setup, tap the Live View in the Aiwit app to see live video from your doorbell

App introduction

Storage Methods : Cloud Storage

• A .Each camera has a lifetime-free Cloud service (loop record every 3 days). You can decide to whether to use It or not.
• B. You can also select other Cloud service package, but you need today for the subscription. Click ‘cloud service’ to know subscription fee.
• C. The subscription is based on camera ID, not refers to App account.
  If you have multiple cameras, it requests to subscribe for each one separately.

Install your Video Doorbell
Mark drill holes and drill holes in your wall. Insert anchors and secure your doorbell to mounting with security screws.

Step 1 Step 2

Frequently asked questions

How to RESET the doorbell
Press and hold the Doorbell Button for 8 seconds. Then follow the in-app instructions to finish your Wi-Fi setup.

How to share the device with my family
Open the Aiwit app. From the home page, tap the Share icon. Tap Share via Email or Share via QR Code. You can share the device with up to 8 users.

Share via Email:
The new user has to download the Aiwit app and create an account with the same email address which the device owner has shared with. Log In to the account and you’ll see the shared device.

Share via QR Code:

1. Open the Aiwit App on a new user’s smartphone.
2. From the home page, tap+.
3. Tap QR Code Sharing, then scan the QR code the device owner generated before.
4. You will see Share successful, then tap Confirm.

How many users can view the video at the same time?
Up to 3 users may view the video feed, but only 1 user can use the direct intercom. Both iOS and Android are compatible

Is 5GHz WI-Fl supported?
No. Only 2.4GHz WI-Fl Is supported.

Why is my Wi-Fi signal poor on my device?
Your device may be too far away from your wireless router or you may have some obstructions in between that reduce signal strength. You might try repositioning your router or getting a signal extender/repeater for your wireless router.

How to adjust Motion Detection Sensitivity
From the home page, tap the Motion Detection icon.

Motion Detection Sensitivity

• Fast: Records and notifies you about every motion.
  Shortest battery life.

• Medium: Records and notifies you about motion less often. Standard battery life.

• Slow: Records and notifies you about motion even less often. Maximum battery life.

How to enable Notifications on my phone
To do this, you need to give permission for the Alwlt app to access to your microphone and enable notifications. Follow these steps to enable notifications

1. Open Settings. Go to Aiwit app permissions and select Notifications.
2. Make sure all switches are on.

Set up your Wireless Chime (Optional)

Connect the video doorbell to the doorbell chime, and get instant alert in your home when someone rings the doorbell. The chime plugs into any wall outlet, you can place it anywhere in the home.

NOTICE:
The video doorbell is only compatible with our wireless chime, and not compatible with traditional doorbell chimes. The wireless chime is optional. If it is not installed, doorbell notifications will still go directly to the Aiwit app.

The Basics

Set up your chime with the video doorbell.

Step 1
Before the setup process, be sure your video doorbell has connected to your phone and plug in your chime • Step 2
Press the Connect Button.

Step 3
Press the Doorbell Button to pair your doorbell to the chime.

Step 4
Press the Tune Button to cycle through 38 different tunes and select a tune

Steps 5
Press the Doorbell Button again to make sure it’ s the tune you selected.

Please Email us for Better Solution
Before Returning any Unqualified Product to Amazon

THANKYOU

Documents / Resources

| GEREE Q8 Wireless WiFi Video Doorbell Camera [pdf] User Manual
Q8 Wireless WiFi Video Doorbell Camera, Q8, Wireless WiFi Video Doorbell Camera, Video Doorbell Camera, Doorbell Camera
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>