MEYER CROSS TL1163 Simone 25-Inch Brass and Rustic Oak 2-Bulb Table Lamp Instruction Manual
- June 6, 2024
- MEYER CROSS
Table of Contents
MEYER CROSS TL1163 Simone 25-Inch Brass and Rustic Oak 2-Bulb Table Lamp
IMPORTANT SAFETY INSTRUCTIONS
- These instructions are provided for your safety. Please read carefully and completely before beginning the assembly and installation of this lighting fixture.
- This lighting fixture is intended for indoor use only.
- Always place lighting fixture on a solid, level surface.
- For use with E26 (medium) base light bulbs only.
- To avoid the risk of fire, do not exceed the maximum wattage of 60W incandescent bulb , or 9W LED bulb , or 13W fluorescent (CFL) bulb , or 9W self-ballasted LED bulb . (Bulbs not included)
- This lighting fixture has a polarized plug (one prong is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug. Do not attempt to bypass this safety feature.
WARNINGS
- To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug this lighting fixture and allow it to cool before attempting to replace the light bulb.
- Do not touch light bulb while fixture is turned on.
- Keep flammable materials away from this lighting fixture.
- Never look directly at a lit bulb.
CARE INSTRUCTIONS
- Unplug lamp before cleaning.
- Wipe clean with a soft, dry cloth or static duster.
- Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish
PRE-ASSEMBLY
Carefully remove all parts and hardware from carton, along with any protective plastic packaging. The lampshade may be covered with a plastic film that should be removed before use.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
- Part A (Finial) may come pre-installed to Part C (Lampshade Post). Unscrew Part A before installing Part B (Lampshade), then reinstall Part A to secure.
PARTS INCLUDED
*(A) Finial
(B) Lampshade
(C) Lampshade Post
(D) Sockets
(E) On/Off Switches
(F) Top Post
(G) Bottom Post
( H) Base
(J)** Base Cover
For use with light bulbs with a E26 (medium) base.
DO NOT EXCEED THE SPECIFIED WATTAGE.
| CAREFULLY PULL CORD DOWN THROUGH THE BASE TO REMOVE SLACK, THEN APPLY
THE BASE COVER (J) AFTER ASSEMBLY.
---|---
Documents / Resources
|
MEYER CROSS TL1163 Simone 25-Inch Brass and Rustic Oak 2-Bulb Table
Lamp
[pdf] Instruction Manual
TL1163, Simone 25-Inch Brass and Rustic Oak 2-Bulb Table Lamp
---|---