SilentiumPC Armis AR7 Full Tower housing Installation Guide
- June 4, 2024
- SilentiumPC
Table of Contents
Armis AR7 Full Tower housing
Installation Guide
Accessories
Mounting set and screws
HDD #1, #2
Open side panel
Unscrew and slide the side panel back
HDD #1, #2
|
---|---
Insert the HDD into the dedicated mounting tray| Slide the HDD into the HDD
cage and secure it using (DJ screw
PUS
|
---|---
Position the PSU on the bottom of the case with the fan facing downwards|
Secure the PSU with (B) screws
EPS cable| ATX cable
---|---
|
Lead the EPS cable through the dedicated hole| Lead the ATX cable through the
dedicated hole
Motherboard| Cable manag.
---|---
|
Install the motherboard’s I/O shield, put the motherboard on standoffs, secure
it with (Al screws, and then plug EPS and ATX cable| Cable management for EPS
and ATX cable
---|---
SSD #1, #2
|
---|---
Secure the SSD in a dedicated place using four screws (A)| SSD #1 and SSD #2
location
SSD#3
|
---|---
Install dedicated (G) screw with pads| SSD #3 location
SSD#4
|
---|---
AUDIO| USB 3.0
---|---
|
Plug in the audio connector to the motherboard| Plug-in USB 3.0 connector to
the motherboard
GPU
|
---|---
Install the GPU in the PCI-E slot on the motherboard and secure it with (C)
screws| Plug in the PCI-E connectors to the GPU
ODD
Remove the front 5.25″ drive bay cover, then slide the ODD into the drive bay
and secure it with screws (A)
Optional fans
| Top fans (120 mm) | Top fans (140 mm) |
|---|
|
Additional features
| Fan controller | Fan controller |
|---|---|
| **** | 
Built-in fan controller for up to 10 fans in total| Fan controller connectors
Fan controller| Blackout feature
| 
Plug the power connector from the fan controller into the SATA connector from
the PSU| Push to turn off LED within the I/O panel
Audio and USB ports covers| Front dust filters
| 
Dust-proof covers for USB and audio ports| Front dust filters are removable
and very easy to clean
PUS cover
HDD cage
Unscrew the HCO cage (there are five screws securing it)
HDD module is removable
I/O panel swap
| I/O panel swap | I/O panel swap |
|---|
|
Unscrew the I/O panel PCB (there are three screws securing it) and remove it|
Remove the cover from the bottom of the front (unscrew three screws)
I/O panel swap| I/O panel swap
|
Place I/O panel PCB in a new place and secure it with one screw| Place covers
and secures them with screws (three screws for the upper cover and two screws
for the bottom cover)
I/O panel swap| 
Documents / Resources
|
SilentiumPC Armis AR7 Full Tower
housing
[pdf] Installation Guide
Armis AR7 Full Tower housing, Armis AR7, Full Tower housing, Tower housing,
housing
---|---