VONYX 173.504 CMS Series Studio Set/Condenser Microphone Instruction Manual
- June 5, 2024
- VONYX
Table of Contents
VONYX 173.504 CMS Series Studio Set/Condenser Microphone
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain the packing material for inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original factory box and packing.
MICROPHONE INPUT EXAMPLES
STAND ASSEMBLY INSTRUCTIONS
- Install the base of the stand on to, for example, a tabletop.
- Attach the suspension arm link to the base stand.
- Tighten the nut once your preferred suspension arm direction has been determined.
- Attach the arm to the suspension arm link.
- Attach the shock mount to the suspension arm. Use the adapter of the microphone holder to enable mounting of the shock mount (picture right).
- Adjust the height of the arm to your preferred height.
- Put the microphone into the clamp ring of the shock mount.
- Optional: attach the pop filter to the stand to eliminate popping and sibilance sound.
SPECIFICATIONS
| CMS400
---|---
Ref.nr.| 173.503| 173.504
Frequency response| 20Hz-20KHz
Sensitivity| -37dB (+/-2dB) / 1KHz
Impedance| 200 Ohm
Mic. Power supply| Phantom 12~48VDC
Weight| 1.5kg
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>