xavax 110232 Base Unit Frame for Large Devices Instruction Manual
- June 5, 2024
- xavax
Table of Contents
xavax 110232 Base Unit Frame for Large Devices Instruction Manual
Part list
Thank you for choosing a Xavax product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes
Safety notes
- The product is intended for private, non-commercial use only.
- Use the product for its intended purpose only.
- Children are not permitted to play with the device.
- Never apply force when using the product or during installation.
- Do not modify the product in any way.
- Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
- You should repeat this check at regular intervals (at least every three months).
- When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
- Make sure that the product is loaded symmetrically.
- During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
Warning
Not suitable for use with a washing machine and a dryer.
Assembly
- Before assembling the transport roller, check that the assembly kit is complete and ensure that none of the parts are faulty or damaged.
- Observe the other warnings and safety instructions.
- Proceed step by step in accordance with the illustrated installation instructions (Fig. 1 onwards)
Dimensions
Mounting Instruction
Note
- Position all four feet of the appliance on the space provided on the base.
- Once you have adjusted the width/length, all safety catches (G) must be applied.
- After assembly, use a spirit level to precisely align the base with the household appliance on it.
- Ensure that the appliance is safe and secure with no movement, and check this each time before using the appliance.
Technical data
Bearing load
|
max. 150 kg
---|---
Width
| 52– 72 cm
Length|
52– 72 cm
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Service & Support
www.xavax.eu
+49 9091 502-0