xaVax 00112696 LED Plant Lamp Instruction Manual
- June 6, 2024
- xavax
Table of Contents
LED Plant Lamp 00112696
Operating Instructions
1. Controls
- Dimmer: five brightness levels
- Colour: three light modes
- Timer: 3 h / 9 h / 12 h
- On/off button
Thank you for choosing a Xavax product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Packaging content
- Grow light
- USB power supply unit, 5 V / 2 A
- These operating instructions
3. Safety notes
-
Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
-
This product is not intended for use by persons, including children, with limited physical, sensory or mental abilities or lacking in experience or knowledge, unless they are supervised by a person responsible for their safety or have been instructed on how to use the product.
-
The product may only be operated with the type of power supply network described on the name plate.
-
Only connect the product to a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
-
Disconnect the product from the power supply when not in use for long periods of time.
-
Do not drop the product and do not expose it to any major shocks.
-
Do not attempt to service or repair the product yourself.
Leave any and all service work to qualified experts. -
Do not open the device or continue to operate it if it becomes damaged.
Warning
Never look straight into the light source and do not aim its beam of light
straight into the eyes of other people or animals. This could damage
your/their eyes.
- Please note that lamps (even LEDs) generate heat and may become hot. Always let the lamp cool down for a few minutes before touching it.
- Do not place any objects or hang objects (for example, decorative material) on the LED lamp. Doing so could create a fire hazard.
- The light source of this light is not replaceable; when the light source has reached the end of its life, you need to replace the entire light.
- Only for use with a suitable USB power supply unit with min. 5 V / 2 A. Do not operate on a PC or laptop.
4. Product features
The grow light supports plant growth when there is little natural light, during both wintering and germination. It can be used for potted plants, succulents, ornamental plants, fruit and vegetables.
Red light:
Promotes photosynthesis and growth in plant height.
Germination, flowering and fruit production are supported, and it plays a
leading role in the colour improvement of plants.
Blue light:
Allows plants to grow bushy and supports them in producing nutrients.
Blue/Red light:
A combination of blue and red light for balanced growth.
5. Getting started and operation
5.1 Connect
Connect the supplied power supply unit to the USB connector of the grow light.
Secure the light on a stable, even, horizontal tabletop or similar, and adjust
to your liking.
Connect the power supply unit to an easily accessible mains socket.
5.2 Settings
Dimmer function
• The dimmer function is adjusted using the +/- button (1).
Each time you press the button, the brightness decreases,
until you get to the lowest brightness level, after which
brightness increases.
• After the light has been switched off using the On/off
button, it will switch on again with the last brightness
setting.
Light modes
- The light colour is adjusted using the arrow button (2).
- First button press: Blue light
- Second button press: Red light
- Third button press: Blue/Red light
- After the light has been switched off using the On/off button, it will switch on again with the last colour setting.
Automatic switch-off function (timer)
- The switch-off function is started using the Timer button (3).
- First button press: automatic switch-off after 3 hours, the On/off button flashes1x – pause – 1x consecutively
- Second button press: automatic switch-off after 9 hours, the On/off button flashes 2x – pause – 2x consecutively
- Third button press: automatic switch-off after 12 hours, the On/off button flashes 3x – pause – 3x consecutively On/off button
- The On/off button is constantly lit when the device is in standby, and goes out after switching on.
6. Care and Maintenance
- Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
- Make sure that water does not get into the product.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
9. Technical data
Specifications in accordance with Regulation (EU) 2019/1782
