Wireless-N Wifi Repeatter User Manual
- June 12, 2024
- WiFi
Table of Contents
WiFi-Repeater
User Manual
**Quick Installation Guide(Q.1.G.)
REV.32.1**
Open Source Code
This product includes software codes developed by third parties. These sofware
codes are sutject to either the GNU General Public License (GPL), Version 2,
June 1991 or the GNU Lesser General Public License (LGPL), Version 2.1,
February 1999. You can copy, distritute, and/or modify in accordance with the
terms and conditions of GPL or LGPL.
The source code should be complete, if you think our need to provide any
additional source code files under GNU General Public License (GPL), please
contact us. We are committed to meeting the requirements of the GNU General
Public License (GPI.). You are welcome to contac us local ofice to get the
orresponding software and licenses. Please inform us your conact detals and
the product code. Ve will send you a CD with the software and license for
free.
Please refer to the GNU GPL Web site for further information.
http://ww.gnu.org/licens/licenses.en.html.
Introduction :
The WiFi Repeater is a combined wired/wireless network connection device designed specifically for small business, ofice, and home office networking requirements. It allows a wireless network to be expanded using multiple access points without the need for a wired backbone to link them. It also works well with other 11b/g and lln protocol wireless products.
NOTE : If you need to ‘the Wi-Fi Repeater, you need press and hold the
reset button inside the tiny hole for’ seconds.
Package Contents
Before you starting to use this router, please check if I there’s anything
missing in the package, and contact your dealer of purchasa to claim for
missing items:
1 x Wireless-N Repeater
1 x RJ-45 Networking Cable
1 x Quick installation Guide
Getting Started
Setting up a Wireless Infrastructure Network
For a typical wireless setup at home (as shown below), please do the Mowing:
Wireless Repeater Mode
You will need WiFi AP/Router Internet access
Wireless AP Mode
You will need broedband Router Internet access
Conrect the WiFi-Repeater to your Routor/Swtch with RJ-45 Cable
How to configure the WI-FI Repeater
You can configure the Wi-Fi Repealer by connecting it with your computer/aptop
with enclosed RJ45 cable cr wirelessly.
A. Configure the Wi-Fi Repeater wirelessly.
Al. Plug the Wi-Fi Repeater to a wall socket.
A2. Click on the network icon( ) on the right bottom of your desktop. You will
find the signal from the WI-Fl Repeater. Click on ‘Connect’ and wall for a few
seconds. A3. Open web browser and type https://192.168.10.1 in the browser’s
address box. This number is the detault IP address for this device. Note:
Please check whether the WiFi-Repeater accord with factory default settings
once you can’t download http://192.168.10.1. If you are still not sure what
reasons, you can reset the WiFi-Repeater, just need to press the reset button
for 10 seconds, then try again.
A4. The login screen telow will appear. Enter the “User Name’ and “Password”
then click “or to lbgin. The default User name is “admin” and Password is
sadmIn”. A5. After logging in, you will see the web page below: Click on
‘Repeater’ to continue.
Wireless-N Wifi Repeater
A6.Select your Wireless SSID to continue. A7. When you see below, please do
not change any setting but only insert the key of votir network.
Click on ‘Apply’ button, The Repeater will restart. Wait for a few seconds
your Wi-Fi Repeater is ready for use.
- The default wireless SSID and Security key of Wi-Fi Repeater is same as your AP/router.
B. Configure the WI-Fl Repeater with RJ45 Cable.
- Plug the Wi-Fi Repeater to a wall socket. Connect your computer 1 laptop with the Wi-Fi Repeater with enclosed RJ45 Cable.
- Follow process A3 to A7 to configure your Wi-Fi Repeater.
C. Configure the Wireless AP Mode.
- Plug the Wi-Fi Repeater into a wall socket.
- Follow process A2 to A4.
- Click on ‘AP to continue.
- The following massage will be displaygd on your web browser:
SSID | the “SSID” of your wireless network. |
---|---|
Channel | Auto (recommend) |
Securty typo | Setup the wireless security and encryption to prevent from |
unauthorized access and monitoring.
Supports 64/128-bit WEP, WPA, WPA2, WPAWPA2 encryption methods.
Securty key| the “Password” of your wireless network.
Click on ‘Apply’ button, The Repealer will restart. Walt a few seconds your Wi-Fi Repeater is ready for use.
How to connect your computer/laptop with the Wi-FI Repeater
Adding a Wireless computers to the WIFi-Repeater
- Log on to the computer.
- Open Connect to a Network by right-clicking the network icon ( ) in the otification area.
- Choose the wireless network from the list that appears, and then click Connect.
- Type the network security key or passphrase if you are asked to do so, and then click OK. You’ll see a confirmation message when you are connected to the network.
- To confirm that you added the computer, do the following: Open Network by clicking the Start button , and then clicking Control Panel. In the search box, type network, and then, under Network and Sharing Center, click View network computers and devices. You should see icons for the computer you added and for the other computers and devices that are part of the network.
Note : If you don’t see icons dill in the Network folder, then network discovery and file sharing might be turned off.
Adding a Wireless computers to the WIFI-Repeater with WPS Button
- Log on to the computer.
- Press the WPS button of the VViFi Repeater directly for 2.3 seconds.
- Press the WPS button of the Wireless Adapter directly for 2- 3 seconds. Click Finish to complete the WPS configuration. (Please check your Wireless adapter Manual with WPS configuration)
- You should see icons for the computer you added and for the other computers and devices that are part of the network.
Adding a wired (Ethernet) computer to the WIFI-Repeater
- Plug the W-Fi Repeater to a wall socket. Connect your computer I laptop with the Wi-Fi Repeater with enclosed RJ45 Cable.
- To confirm that you added the computer, do the Mowing: Open Network by clicking the Start button , and then clicking Control Panel. In the search box, type network, and then, under Network and Sharing Center, click View network computers and devices. You should see icons for the computer you added and for the other computers and devices that are part of the network.
For more information:
https://windows. microsoft. conven-US/windows
7/Add-a-device—onr—computer—to-a—network
https://windows.microsof.com/en-US/windowsvVetting—up-a-—vireiess-
network
https://windows.microsoft.com/en~US/windows—vista/settirg—up—a—wireless—network
How to configure your computer/laptop with the Network IP Address
- Log on to the computer.
- Click the “Start” button (it should be located at the lower-left comer of your screen), then click ‘Control Panel’. Click “View Network Status and Tasks”, and then click “Manage Network Connections”. Right-click “Local Area Network”, then select “Properties”. When the “Local Area Connection Properties” window appears, select “Internet Protocol Version 4 (TCPIIPv4)” and then click “Properties”.
- Setting IP address manually: Type IP adress is 102.168.10.x (x is from 2 to 254), and Subnet mask is 255.255.255.0. Type the Routers LAN IP address (the default IP is 192.168.10.1) into the Default gateway field.
Configuring via Web Browser
Wireless Base Configuration – AP Mode
In AP mode and click “Wireless -> Basic Settings” located at the web
management interface, the following message will be displayed on your web
browser:
You could configure he minimum number of Wireless settings for communication,
such as Network Name (SSID) and Channel. The Access Point car be set simply
with only the minimum setting items.
Wireless Enable | Wireless On/Off |
---|---|
SSID | the “SSID’ of your wireless network. |
Channel | Auto (recommend) |
Security type | Setup the wireless security and encryption to prevent from |
unauthorized access and monitoring. Supports 64/128-bit WEP, WPA, WPA2,
WPAWPA2 encryption methods.
Security key| the “Password’ of your wireless network.
Click ‘Apply’ button, The WiFi Repeater will restart.
Wireless Base Configuration – Repeater Mode
In Repeater mode and click ‘Wireless-> Basic Settings’ located at the web
management interface, the followirg message will be displayed on your web
browser:
Wireless Enable | Wireless On/Off |
---|---|
Delete | Remove the repeater connection profile |
Repeater ssid | the aSSID” of your repeater wireless network. |
Security type | Setup the repeater ssid secunity type. |
Security key | the “Password’ of your repeater wireless network. |
Click ‘Apply’button, The WiFi Repeater will restart.
Change Management password
Default password of Wireless Router is eadmin% and it’s displayed on the login
prompt when accessed from web browser.
There’s a security risk if you don’t change ‘he default password, since
everyone can see it.
This is very important when you ! wireless function enabled.
change password, please follow the following instructions:
Please click ‘Management -> Password’ menu on the web management interface.
the following message will be displayer on your web browser:
If you want to keep original password unchanged. click ‘Cancel’.
Click ‘Apply’ button, The WiFi Repeater will log off.
Firmware Upgrade
The system software used by this router is called as ‘firmware’, just like any
applications on your computer, when you replace the old application with a new
one, your computer will be equipped with new function. You can also use this
firmware upgrade function to add new functions to your router, even fix the
bugs of this router.
Please click ‘Management-> Upgrade Firmware’ located at the web management
interface, and then the following message will be displayed on your web
browser: Click ‘Browse…’or ‘Choose File’ button first; youll ba prompted to
provide the filename of fimmware upgrade file. Please download the latast
firmware file from our website, and use it to upgrade your router.
After a firmware upgrade file is selected, click ‘Upload’ button, and the
router will start firmware upgrade procedure automatically.
The procedure may take several minutes, please be patient.
NOTE: Never interrupt the upgrade procedure by closing the web browser or
physically disconnect your computer from router. If the firmware you uploaded
is corrupt, the firmware upgrade will fail, and you may have to retum this
router to the dealer of purchase to ask for help. (Warranty voids if you
interrupted the upgrade prccedure).
Factory Default and Settings Backup, Restore
You can backup all Setting of this router to a file, so you can make several
copied of router configuration for security reason.
To backup or restore router setting, please follow the following instructions:
Please click ‘Save/Reload setting’ located at the web management interface,
then the following message will be displayed on your web browser.
Save Settings| Press ‘Save…’ button, you can please save it as another
filename for different versions, and keep it in a safe place.
---|---
Load Settings| Press ‘Browse..’ to pick a previously-saved configuration file
from your computer, and then click ‘Upload…’ . After the. configuration is
uploaded, the router’s configuration will be replaced by the file you just
uploaded.
Reset Settings| Click this ‘Load default button to remove all settings
WEEE Directive & Product Disposal
At the and of is serviceable life, this product should not be treated as
household or general waste. It should be handed over to the applicable
collector point for the recycling of electrical and electronic equipment, or
returned to the supplier `or disposal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>