Xavax 00110233 Transport Rollers for Large Devices User Manual
- June 8, 2024
- xavax
Table of Contents
Xavax 00110233 Transport Rollers for Large Devices
Thank you for choosing a Xavax product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
PARTS
INSTALLATION
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Safety notes
- The product is intended for private, non-commercial use only.
- Use the product for its intended purpose only.
- Children are not permitted to play with the device.
- Never apply force when using the product or during installation.
- Do not modify the product in any way.
- Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
- You should repeat this check at regular intervals (at least every three months).
- When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
- Make sure that the product is loaded symmetrically.
- During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
Warning
Not suitable for use with a washing machine and a dryer.
Assembly
- Before assembling the transport roller, check that the assembly kit is complete and ensure that none of the parts are faulty or damaged.
- Observe the other warnings and safety instructions.
- Proceed step by step in accordance with the illustrated installation instructions (Fig. 1 onwards)
Note
- Position all four feet and four rollers in the space provided on the transport roller.
- Once you have adjusted the width/length, all safety catches (G) must be applied.
- After assembly, use a spirit level to precisely align the transport roller with the household appliance on it.
- Ensure that the appliance is safe and secure with no movement, and check this each time before using the appliance.
- Release the brakes for transport. To do so, tilt the lever (F) upwards. The transport roller can now be moved easily.
- Always push the brake lever (F) down once the transport roller is in its intended position
Technical data
- Bearing load max. 150 kg
- Width 50–70cm
- Length 50–70cm
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage
resulting from improper installation/
mounting, improper use of the product or from failure to observe the operating
instructions and/or safety notes
Service & Support
www.xavax.eu
+49 9091 502-0