brother PJ-622 Pocket Jet Mobile Printer User Guide
- June 13, 2024
- Brother
Table of Contents
brother PJ-622 Pocket Jet Mobile Printer
Product Information
Product Name: PocketJet PJ-622/PJ-623/PJ-662/PJ-663 Mobile Printer
Manufacturer : Not mentioned
Manual Link:https://manual-hub.com/
Product Usage Instructions
Safety Precautions
- If the printer malfunctions, immediately stop using it and contact the sales representative where the printer was purchased.
Symbols Used
- DANGER: Indicates an imminently hazardous situation which, if the product is handled without following the warnings and instructions, will result in death or serious injuries.
- WARNING: Indicates a potentially hazardous situation which, if the product is handled without following the warnings and instructions, could result in death or serious injuries.
- CAUTION: Indicates a potentially hazardous situation which, if the product is handled without following warnings and instructions, may result in minor or moderate injuries, and/or property damage.
Important Safety Instructions
DANGER – Rechargeable Ni-MH Battery
Carefully observe the following precautions for the optional rechargeable Ni-
MH battery:
- To charge the rechargeable battery, insert it into the PocketJet PJ-622/PJ-623/PJ-662/PJ-663 printer and use the AC adapter/DC cable designed specifically for this printer.
- Do not insert or use the rechargeable battery in any equipment other than the PocketJet PJ-622/PJ-623/PJ-662/PJ-663 printer. Do not directly connect it to a power supply, car cigarette lighter, or electrical outlet. Do not expose the rechargeable battery or the printer with a rechargeable battery installed to pressure, heat, or an electric charge (such as an oven or microwave oven, clothes dryer, high-voltage equipment, or electromagnetic cooker).
- Do not place the rechargeable battery or the printer with the rechargeable battery installed near a fire or in a location exposed to heat or high temperatures (such as near a flame or stove, in the sun, or in a hot car).
- Do not place the rechargeable battery or the printer with the rechargeable battery installed near water or seawater. In addition, do not drop them in water or allow them to get wet.
- Do not short-circuit the terminals of the rechargeable battery or the printer with the rechargeable battery installed, such as with a metal object.
- Do not pierce or poke a hole in the rechargeable battery or the printer with the rechargeable battery installed with a sharp object, such as a nail.
- Do not hit with a hammer, step on, throw, drop or apply a strong shock to the rechargeable battery or the printer with the rechargeable battery installed.
Be sure to read this document before using the printer.
Introduction
Thank you for purchasing the PocketJet PJ-622/PJ-623/PJ-662/PJ-663 (hereafter
referred to as “the printer”).
This monochrome thermal mobile printer is ultra-portable and can be connected
to a Mobile device, Windows® PC, or Macintosh® to make quick printouts. The
documentation included with the printer (Safety and Legal, Quick Setup Guide,
and User’s Guide which can be found on the setup CD-ROM) contains operating
precautions and instructions. For PJ-623/PJ-663, the P-touch® Editor Software
User’s Guide, which can also be found on the setup CD-ROM, contains operating
instructions for the P-touch® Editor software. Before using the printer, be
sure to read these documents for information about safety and proper
operation. Save all documentation for later reference.
Important Notice
- The contents of this document are subject to change without notice.
- The contents of this document may not be duplicated or reproduced, partially or in full, without permission.
- We assume no responsibility for damages arising from earthquakes, fire, other disasters, actions of third parties, the user’s intentional or negligent operation, misuse or operation under other special conditions.
- We assume no responsibility for damage (such as losses, loss of business profits, lost profits, business disruptions, or a lost means of communication) that may result from the use or inability to use the printer.
- If the printer is defective due to faulty manufacturing, we shall replace or repair it during the warranty period.
- We assume no responsibility for damages that may result from the incorrect operation of the printer by connecting incompatible equipment or using incompatible software.
To use the machine safely
If the printer malfunctions, immediately stop using it, and then contact the
sales representative where the printer was purchased.
Symbols used in this document
The following symbols are used throughout this document.
DANGER| Indicates an imminently hazardous situation which, if the
product is handled without following the warnings and instructions, will
result in death or serious injuries.
---|---
WARNING| Indicates a potentially hazardous situation which, if the
product is handled without following the warnings and instructions, could
result in death or serious injuries.
CAUTION| Indicates a potentially hazardous situation which, if the
product is handled without following warnings and instructions, may result in
minor or moderate injuries, and/or property damage.
- Indicates a risk of fire under certain circumstances
- Indicates a risk of electric shock under certain circumstances
- Indicates a risk of burns under certain circumstances
- Indicates an action that must not be performed
- Indicates a risk of combustion if fire is nearby
- Indicates a risk of injury if the indicated part of the printer is touched
- Indicates a risk of injury, such as electric shock, if the indicated part of the printer is disassembled
- Indicates a risk of electric shock if the operation is performed with wet hands
- Indicates a risk of electric shock if the printer is exposed to water
- Indicates an action that must be performed
- Indicates that the AC power cord must be disconnected from the electrical outlet
Important Safety Instructions
DANGER
Rechargeable Ni-MH Battery
| Carefully observe the following precautions for the optional rechargeable Ni-MH battery (hereafter, referred to as “rechargeable battery”), otherwise heat or cracks may be produced, or explosion, smoke, fire, electric shock, or damage may result.
n To charge the rechargeable battery, insert the rechargeable battery into the PocketJet
PJ-622/PJ-623/PJ-662/PJ-663, and then use the AC adapter/DC cable designed specifically for this printer.
n Do not insert or use the rechargeable battery in any equipment other than the PocketJet
PJ-622/PJ-623/PJ-662/PJ-663. Do not directly connect it to a power supply, car cigarette lighter or electrical outlet. Do not expose the rechargeable battery or the printer with the rechargeable battery installed to pressure, heat, or an electric charge (such as an oven or microwave oven, clothes dryer, high- voltage equipment or electromagnetic cooker).
n Do not place the rechargeable battery or the printer with the rechargeable battery installed near a fire or in a location exposed to heat or high temperatures (such as near a flame or stove, in the sun, or in a hot car).
n Do not place the rechargeable battery or the printer with the rechargeable battery installed near water or seawater. In addition, do not drop them in water or allow them to get wet.
n Do not short-circuit the terminals of the rechargeable battery or the printer with the rechargeable battery installed, such as with a metal object.
n Do not pierce or poke a hole in the rechargeable battery or the printer with the rechargeable battery installed with a sharp object, such as a nail.
n Do not hit with a hammer, step on, throw, drop or apply a strong shock to the rechargeable battery or the printer with the rechargeable battery installed.
n Do not disassemble or alter the rechargeable battery or the printer with the rechargeable battery installed.
n Do not use a damaged or deformed rechargeable battery.
n Do not use in a corrosive environment (such as an area exposed to salty air, salt water, or acidic, alkaline or corrosive gas).
n Liquid (electrolyte) leaking from the printer or rechargeable battery may indicate that the rechargeable battery is damaged. If the rechargeable battery leaks, immediately move the printer or rechargeable battery away from flames.
Do not touch the electrolyte. If electrolyte gets in the eyes, do not rub the eyes. Immediately rinse liberally with tap water or other clean water and seek the advice of a medical professional. If left alone, the electrolyte could cause eye damage. If the liquid contacts your skin or clothing, immediately rinse them with water. Place the printer in a bag to isolate it.
n Do not put the rechargeable battery, or a printer with the rechargeable battery installed, into a microwave oven or a high pressure container.
DANGER
Rechargeable Li-ion Battery
| Carefully observe the following precautions for the optional rechargeable Li-ion battery (hereafter, referred to as “rechargeable battery”), otherwise heat or cracks may be produced, or leaking, electrical short, explosion, smoke, fire, electric shock, or damage may result.
n To charge the rechargeable battery, insert the rechargeable battery into the PocketJet
PJ-622/PJ-623/PJ-662/PJ-663, and then use the AC adapter/DC cable designed specifically for this printer.
n Do not disassemble or modify the rechargeable battery. The safety mechanisms and protection circuitry within the rechargeable battery could become disabled.
n Do not allow wires or other metal objects to come into contact with the terminals of the rechargeable battery. Do not carry or store with metal objects such as necklaces or hairpins. This could cause an electrical short, and could cause metal objects such as wires, necklaces, or hairpins to overheat.
n Do not dispose of the rechargeable battery in fire or intentionally overheat. This could cause the internal insulation to melt, gas to be emitted, or safety mechanisms to fail. Additionally, the electrolyte could catch fire.
n Do not use or leave the rechargeable battery near fire, heaters, or other high temperature (above 80°C) locations.
n Do not allow the rechargeable battery to come into contact with or to be immersed in regular or salt water. The safety mechanisms and protection circuitry within the rechargeable battery could become disabled.
n Do not charge the rechargeable battery near a fire or in direct sunlight. This could cause the protection circuitry which is designed to prevent danger due to high heat to activate, causing either charging to stop, charging to occur under excessive current/voltage due to failure of the protection circuitry, or abnormal chemical reaction within the rechargeable battery.
n Only charge the rechargeable battery using the AC adapter/DC cable designed specifically for this printer or in accordance with the specified charging parameters. Charging outside these parameters (charging at higher than the recommended temperature, higher than the recommended current/voltage, using a modified adapter, etc.) could overcharge the rechargeable battery, charge the rechargeable battery at an abnormal current/voltage, or cause an abnormal chemical reaction within the rechargeable battery.
n Do not pierce the rechargeable battery with a nail, hit with a hammer, or step on the rechargeable battery.
n Do not subject the rechargeable battery to severe shocks or throw the rechargeable battery. Damage to the rechargeable battery’s protection circuitry could cause the rechargeable battery to be recharged at an abnormal current/voltage, or cause an abnormal chemical reaction within the rechargeable battery.
n Do not use the rechargeable battery if it is severely damaged or deformed.
n Do not directly solder any connections to the rechargeable battery. This could cause internal insulation to melt, gas to be emitted, or safety mechanisms to fail.
n Do not use the rechargeable battery with the polarity (+) (-) reversed. Check the orientation of the rechargeable battery before inserting it, and do not try to force the rechargeable battery into the printer. Charging the rechargeable battery with the polarity reversed could cause an abnormal chemical reaction within the rechargeable battery or abnormal current flow during discharge.
n Do not directly connect the rechargeable battery to a household or vehicle cigarette lighter socket.
DANGER
| n Use the rechargeable battery only with approved devices. Use with other devices may result in lower battery performance or battery life.
n Liquid (electrolyte) leaking from the printer or rechargeable battery may indicate that the rechargeable battery is damaged. If the rechargeable battery leaks, immediately move the printer or rechargeable battery away from flames.
Do not touch the electrolyte. If electrolyte gets in the eyes, do not rub the eyes. Immediately rinse liberally with tap water or other clean water and seek the advice of a medical professional. If left alone, the electrolyte could cause eye damage. If the liquid contacts your skin or clothing, immediately rinse them with water. Place the printer in a bag to isolate it.
n Do not put the rechargeable battery, or a printer with the rechargeable battery installed, into a microwave oven or a high pressure container.
WARNING
Printer
| Do not use the printer where its use is prohibited, such as on an
airplane. This could affect equipment, resulting in an accident.
| Do not use the printer in special environments, such as near medical
equipment. Electromagnetic waves may cause the equipment to malfunction.
| n Do not insert foreign objects into the printer or its connectors and ports, otherwise fire, electric shock, or damage may result.
n If foreign objects are dropped into the printer, immediately turn it off, disconnect the AC adapter/DC cable from the electrical outlet, and then contact the sales representative where the printer was purchased. If you continue to operate the printer, fire, electric shock, or damage may result.
| Do not operate, charge, or store the printer in the following locations, otherwise leaking, fire, electric shock, or damage may result.
n Near water, such as in a bathroom or near a water heater, or in an extremely humid location
n In a location where it is exposed to rain or moisture
n In an extremely dusty location
n In an extremely hot location, such as near naked flames, heaters, or in direct sunlight
n In a closed car under a hot sun
n In a location where condensation may form
****| If you see lightning nearby, disconnect the AC adapter/DC cable from the electrical outlet. If lightning strikes nearby, do not touch the printer, since there is a risk of electric shock.
| Do not try to disassemble or alter the printer, otherwise fire, electric
shock, or damage may result. For servicing, adjustments or repairs, contact
the sales representative where the printer was purchased. (The warranty does
not cover repairs for damage resulting from disassembly or alterations
performed by the user.)
WARNING
| The printer may be damaged if it is dropped or subjected to strong shocks, such as being stepped on. If you continue to operate a damaged printer, fire or electric shock may result. If the printer is damaged, immediately turn it off, disconnect the AC adapter/DC cable from the electrical outlet, and then contact the sales representative where the printer was purchased.
| If the printer operates abnormally (for example, if it produces smoke, an
unusual odor, or noise), stop using it, otherwise fire, electric shock, or
damage may result. Immediately turn off the printer, disconnect the AC
adapter/DC cable from the electrical outlet, and then contact the sales
representative where the printer was purchased for repairs.
****| Do not charge the printer with an AC adapter/DC cable other than that
specified.
| If the printer is not fully charged after the specified amount of time has passed, stop charging it, otherwise fire, electric shock, or damage may result.
| Do not place the product near chemicals or in a place where chemical
spillage could occur. In particular organic solvents or liquids may cause the
casing and/or cables to melt or dissolve, risking fire or electric shock. They
may also cause the product to malfunction or become discolored.
AC adapter/DC cable
| Only use the AC adapter/DC cable designed specifically for this printer, otherwise fire, electric shock, or damage may result.
| Do not plug the printer into an electrical outlet other than a household outlet (AC100-240V 50/60Hz), otherwise fire, electric shock, or damage may result.
| Do not touch the AC adapter/DC cable or the power supply plug with wet hands, otherwise electric shock may result.
| Do not try to disassemble, alter, or repair the AC adapter/DC cable, otherwise fire, electric shock, or injury may result.
For servicing, adjustments or repairs, contact the sales representative where the printer was purchased.
WARNING
| Do not spill water or drinks on the AC adapter/DC cable. In addition, do not use the AC adapter/DC cable in a location where it may get wet, otherwise explosion or electric shock may result.
| If the power supply plug becomes dirty (for example, if it becomes covered with dust) disconnect it from the electrical outlet, and then wipe it with a dry cloth. If you continue to use a dirty power supply plug, fire may result.
| When disconnecting the AC power cord, do not pull on the cord, otherwise fire or electric shock may result.
| Do not insert foreign objects into the terminals of the AC adapter/DC cable, otherwise burns or electric shock may result.
| Use the AC adapter/DC cable correctly and observe the following precautions, otherwise fire or electric shock may result.
Do not damage the AC adapter/DC cable.
Do not modify the AC adapter/DC cable.
Do not twist the AC adapter/DC cable.
Do not severely bend the AC adapter/DC cable.
Do not pull on the AC adapter/DC cable.
Do not place objects on the AC adapter/DC cable.
Do not subject the AC adapter/DC cable to heat.
Do not bind the AC adapter/DC cable.
Do not allow the AC adapter/DC cable to be pinched.
| If the AC adapter/DC cable is damaged, request a new one from the sales
representative where the printer was purchased.
| Keep the AC adapter/DC cable out of the reach of children, particularly
infants, otherwise injury may result.
****| Do not use the AC adapter/DC cable near microwave ovens, otherwise
damage to the AC adapter/DC cable or printer may result.
| Do not use the AC adapter/DC cable near flames or heaters. If the covering
of the AC adapter/DC cable cord melts, fire or electric shock may result.
WARNING
| Before performing maintenance on the printer, such as cleaning, disconnect
the AC adapter/DC cable from the electrical outlet, otherwise electric shock
may result.
| If the printer will not be used for a long period of time, disconnect
the AC adapter/DC cable from the printer and the electrical outlet for safety
reasons.
| Do not wind the AC adapter/DC cable cable around the adapter or bend
the cable, otherwise the cable may be damaged.
CAUTION
Printer
| Keep the printer and its accessories (rechargeable battery,
consumables, plastic bags, labels, etc.) out of the reach of children,
particularly infants, otherwise injury or accidents such as ingestion may
result.
| Stop operating the printer if it leaks or becomes discolored, deformed,
or otherwise defective.
****| Do not operate the printer while holding only the release cover. If the
cover comes off and the printer falls, injury may result.
General Precautions
Rechargeable battery
| At the time of purchase, the rechargeable battery is slightly charged
so that the operation of the printer can be verified; however, the
rechargeable battery should be fully charged with the AC adapter/DC cable
before the printer is used.
| If the printer will not be used for a long period of time, remove the
rechargeable battery from the printer, and then store it in a location where
it is not exposed to static electricity, high humidity, or high temperatures
(temperatures between 15 and 25 °C and 40% to 60% humidity are recommended).
In order to maintain the efficiency and life of the rechargeable battery,
charge it at least every six months.
****| The printer is powered with a rechargeable battery. If the printer can
only be used for a short period of time, even though it is fully charged, the
rechargeable battery may have reached the end of its service life. Replace the
rechargeable battery with a new one.
When replacing the rechargeable battery, cover the battery terminals that make contact with the printer with tape to prevent the terminals from shorting.
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
© 2010 Brother Industries, Ltd. All rights reserved.
- Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and other countries.
- Apple, Macintosh and Mac OS are trademarks of Apple Inc., registered in the United States and other countries.
- The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Brother Industries, Ltd. under license.
- Adobe and Reader are either registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.
- Portions of the graphics filter software are based in part on the work of the Independent JPEG group.
- QR Code is a registered trademark of DENSO WAVE INCORPORATED in JAPAN and other countries. QR Code Generating Program Copyright © 2008 DENSO WAVE INCORPORATED.
- This product contains DeepCore OBEX as an Infrared Data communication protocol owned by E-Globaledge Corporation Copyright 2006 E-Globaledge Corp. All Rights Reserved.
- BarStar Pro Encode Library (DataMatrix, PDF417) Copyright © 2007 AINIX Corporation. All rights reserved.
- Epson ESC/P is a registered trademark of Seiko Epson Corporation.
- Each owner whose software title is mentioned in this document has a Software License Agreement specific to its proprietary programs.
- All other software and product names mentioned are trademarks or registered trademarks of their respective companies.
Regulation
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
Federal Communications Commission
(FCC) Declaration of Conformity (For USA Only)
- Responsible Party: Brother Mobile Solutions, Inc. 600 12ht Street, Suite 300 Golden, CO 80401, U.S.A. TEL: (303)728-0288
- Product Name: Thermal Printer
- Model Number: PJ-622, PJ-623, PJ-662, PJ-663
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important
- The enclosed interface cable should be used in order to ensure compliance with the limits for a Class B digital device.
- Changes or modifications not expressly approved by Brother Mobile Solutions, Inc. could void the user’s authority to operate the equipment.
Industry Canada Compliance Statement (For Canada only)
This Class B digital apparatus complies with Canadian ICES–003.
LBA786001
Printed in the USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>