ATEN VK330 10.1 Inch Touch Panel User Guide

June 5, 2024
Aten

ATEN VanCryst™
VK330
10.1” Touch Panel
Quick Start Guide

Package Contents

  • 1 VK330 10.1” Touch Panel
  • 1 User Instructions

Hardware Review

ATEN VK330 10 1 Inch Touch Panel - overview1

1 Touch Screen
2 Status LED
3 Function Button
4 Brightness Up/Down
5 Volume Up/Down
6 LAN Port with PoE
7 USB Type-A Port| 8 Micro-USB Port
9 Power Jack
10 Power Switch
11 Speakers
12 M4 Screw Holes for Mounting
13 For debugging purposes only
---|---

Mounting the VK330

ATEN VK330 10 1 Inch Touch Panel - overview2 Note: Accessories for wall mount (VK302) and desk mount (VK304) installations are available for purchase. For more information, visit the VK330 product web page.
The VK330 Touch Panel supports desk mount, wall mount, or any third-party mounting accessory that is VESA compliant (75 mm x 75 mm). For more information about the accessories, visit the product web page. To mount the VK330 to the wall using the ATEN wall mount accessory, follow the steps below.

  1. Secure the wall plate to the wall using the wall anchors and screws.
  2. Secure the panel plate to the VK330 using the M4 screws.
  3. Slide the panel plate to the wall plate.

Hardware Installation

  1. Use an Ethernet cable to connect the unit to a PoE switch or PoE injector to provide power and access to the network.
  2. Put the Power Switch to ON. The status LED lights are green.

Software Configuration

Adding Viewers to the ATEN Control System App

  1. After switching the power to ON, wait for the ATEN Control System welcome page to appear.
  2. Tap Start. The Download Viewer page appears.
  3. Search for controllers and add Viewers that you have created. For more information about the ATEN Control System app, refer to the ATEN Control System User Manual.

Confi during the Network Settings
To confi gure network settings:

  1. Press the Function button.
  2. Tap Network & Internet > Ethernet > Ethernet IP Mode to configure the network settings.

Operation

  • To return to the settings page, press the Function button once.
  • To return to the welcome screen, press and hold the Function button for 2 seconds.

Support and Documentation Notice

All information, documentation, firmware, software utilities, and specifications contained in this package are subject to change without priornotification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/

Technical Support

www.aten.com/support

Scan for more information

ATEN VK330 10 1 Inch Touch Panel - QR

http://www.aten.com/products/productItem.php?model_no=vk330

|

http://www.aten.com/ext_libraries/manuals.php?n=vk330

Manufacturer: ATEN International Co., Ltd.
3F., No.125, Sec. 2, Datong Rd., Xizhi District, New Taipei City 221, Taiwan
Belgium Subsidiary: ATEN Infotech N.V.
Mijnwerkerslaan 34, 3550 Heusden-Zolder, Belgium

© Copyright 2020 ATEN
®International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd.
All rights reserved.
All other trademarks are the property of their respective owners.
Printing Date: 12/2020
www.aten.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals