belkin PAC002 True Wireless Earbuds with Qi Wireless Charging Case User Manual
- June 5, 2024
- belkin
Table of Contents
belkin PAC002 True Wireless Earbuds with Qi Wireless Charging Case User Man
Material Specifications
Material: 350gsm C1S SBS (20pt)
Blank Size (in): 29.644 x 28.681
Blank Size (mm): 752.954 x 728.495
sku
| AUF001
---|---
Outer Box|
Refer artwork
Paper insert
| Refer artwork
Cable/Ear Tip|
Refer artwork
PET hanger
| 7100-00265 Rev. A00
PET FIlm Strap|
Refer artwork
FCC
| Refer artwork
wafer seal (2pcs)|
25 mm
Hanger folded in case pack
Dimension
Retail Outside Dimension (Including Hang Tab)
L x W x D (in):
L x W x D (mm):
Bluetooth
Reset Instructions
Battery Charging
Safety Instructions
High sound pressure – To prevent possible hearing damage, do not listen at high volume levels for long periods. Do not use headphones when it’s unsafe to do so like while driving, operating heavy machinery, or whenever you need to pay attention to your surroundings. This product contains small parts, which may be a choking hazard. Keep this product out of reach of small children.
Clean only with dry soft cloth. Do not store your device in very hot or very
cold areas. Operating Conditions: 0° C to 40° C
Do not expose to rain or snow. Keep away from heat sources, direct sunlight,
combustible gas, water, or other liquids. Do not expose to fire or excessive
temperature.
Do not use if visible defects are observed on the product.
Do not attempt to service or disassemble.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
If you experience problems with the product, please discontinue use, and contact Belkin for assistance.
Do not subject the headphones to crushing, bending, puncturing, or shredding. Avoid dropping or placing heavy objects on the headphones.
Federal Communications Commission Interference Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, Tel: +1 (310) 751 5100 , declare under our sole responsibility that the product, PAC002, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement :
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. To maintain compliance with FCC RF exposure
compliance requirements, please follow operation instructions as documented in
this manual. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Innovation, Science and Economic Development Canada Statement
CAN ICES-3 (B)/NMB-3 (B)
This device complies with ISED’s license exempt RSS standards. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- his device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Simplified EU Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility that the
product, PAC002, to which this declaration relates, is in conformity with RED
Directive 2014/53/EU and (EU) 2015/863 RoHS Directive 2011/65/EU (Recast). The
full text of the EU declaration of conformity is available at the following
Internet address: belkin.com/doc
Radiation Exposure Statement: This equipment complies with radiation exposure
limits set forth for an
uncontrolled environment.
The operating frequency bands and the maximum transmitted power limit are listed below:
2402-2480 (Bluetooth) MHz <20mW
Disposal Information for User
For information on product disposal,
please refer to http://www.belkin.com/uk/weee-regulations/
Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of
the European Parliament on waste in electrical and electronic equipment
(WEEE). The barred symbol of the rubbish bin shown on the equipment indicates
that, at the end of its useful life, the product must be collected separately
from other waste. Therefore, any product that has reached the end of its
useful life must be given to waste disposal centers specializing in separate
collection of waste electrical and electronic equipment, or given back to the
dealer when purchasing a new WEEE, pursuant to and in accordance with
Article14 as implemented in the country. The adequate separate collection for
the subsequent start-up of the equipment sent to be recycled, treated and
disposed of in an environmentally compatible way contributes to preventing
possible negative effects on the environment and health and optimizes the
recycling and reuse of components making up the electronic equipment.
Abusive disposal of the product by the user involves application of the
administrative sanctions according to the laws in force.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>