belkin G1S0001 Sound Elite Hi-Fi Smart Speaker + Wireless Charger Instructions
- June 5, 2024
- belkin
Table of Contents
belkin G1S0001 Sound Elite Hi-Fi Smart Speaker + Wireless
**Charger Instructions**
Federal
Communications Commission Interference Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC
COMPATIBILITY
We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA
90094, Tel: +1 (310) 751 5100, declare under our sole
responsibility that the product G1S0001, G1S0002 to which this declaration
relates, complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Innovation, Science and Economic Development Canada Statement
CAN ICES-3 (B)/NMB-3 (B)
This device complies with ISED’s license-exempt RSS standards. Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Rstrictions in the 5 GHz Band
The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.
This class B digital apparatus complies with ICES-003(B), RSS-216 and RSS-247. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause
undesired operation of the device.
The installer of this radio equipment must ensure that the product is located such that it does not emit RF field in excess of Health
Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb. As mentioned before, the installer cannot control the antenna orientation. However, they could place the complete product in a way that causes the problem mentioned above. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Simplified EU Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility that the
product G1S0001, G1S0002 to which this declaration
relates, is in conformity with RED Directive 2014/53/EU, Energy Directive
2005/32/EC & 2009/125/EC and RoHS Directive 2011/65/EU (Recast). The full text
of the EU declaration of conformity is available at the following Internet
address: www.belkin.com/doc
Radiation Exposure Statement: This equipment complies with radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20
cm between the radiator and your body.
This product does not have a standby or off mode other than removing the
connection from the wall charger to the smart speaker wireless charger or
removing the wall charger from the AC mains.
The operating frequency bands and the maximum transmitted power limit are listed below:
National Restrictions
Caution:
This device is restricted to indoor use only when operating in 5150 – 5350 MHz
Disposal Information for User
For information on product disposal, please refer to http://www.belkin.com/uk /weee-regulations/ Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE).
The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.
Therefore, any product that has reached the end of its useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country.
The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the electronic equipment.
Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.
Safety Instructions
Use indoors and in a dry location only, keep away from wet or damp locations.
Keep smart speaker and wall adapter away from any liquids or moisture. Clean
only with dry soft cloth.
Clean only with dry soft cloth.
Unplug the smart speaker when unused for long periods of time.
Do not store your device in very hot or very cold areas. It is recommended to
use your device at room temperatures.
Do not place near any heat sources such as radiators, heat registers, stoves,
or other apparatus that produce heat.
Do not use if visible defects are observed on the smart speaker or wall
adapter.
Do not attempt to service or disassemble. Any changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
If you experience problems with the smart speaker, please discontinue use,
unplug the wall adapter of the smart speaker wireless charger from the AC
socket, and contact Belkin for assistance.
Caution : To prevent possible hearing damage do not listen at high volume levels for long periods.
References
- Aktuelles | Halen
- Belkin Official Support - European Declaration of Conformity (Page 1)
- Be Ready For Today | Belkin UK
- belkin.com/uk/weee-regulations/