TAKSTAR E261W Portable Wireless Amplifier User Manual

: June 5, 2024
: TAKSTAR

Table of Contents

Preface
Features
Application
Product content
Speciﬁcation
Function instruction
Instructions for use
Safety instruction
The meaning of icon
Read User Manual Online (PDF format)
Download This Manual (PDF format)

E261W
Portable wireless ampliﬁer
User Manual
E261W Portable wireless ampliﬁer

Preface

Dear Customer,
Thank you for purchasing TAKSTAR E261W handheld/head-mounted portable wireless ampliﬁer. Please read the user manual carefully before operation and keep it for reference in the future. If you have any questions or suggestions, please contact our local dealer.

Features

Handheld version

Rare earth material speaker, 25W high power, excellent sound, high volume
UHF wireless technology, approximately 40m transmission range in an open area without interference
Adjustable frequencies, 50 selected channels available, supporting multiple ampliﬁers used simultaneously
Wireless handheld microphone, automatic frequency matching technology, easy operation, strong anti-interference capability
Wireless playing function without the trouble of cable connection, more convenient to play songs
High capacity Li-ion battery with approximately 12h operation time
High-end aluminum alloy box, convenient to store and carry

Head-mounted version

A portable wireless ampliﬁer was suitable for teaching, tour guiding, training, promotion, etc.
UHF wireless technology, approximately 40m transmission range in an open area
Adjustable frequencies, 50 selected channels available, supporting multiple ampliﬁers used simultaneously
Wireless headset microphone, compact and lightweight design for long-time wearing
Rare earth material speaker, 25W high power, excellent sound, high volume
Wireless playing function without the trouble of cable connection, more convenient to play songs
High capacity Li-ion battery with approximately 12h operation time

Application

Teaching, tour guide, training, promotion, etc.

Product content

Handheld version
Ampliﬁer—————————–1 pc
Handheld microphone————1 pc
Micro USB charging cable——–1 pc
Anti Slip Roller Ring—————1 pc
AA batteries————————-2 pcs
User manual————————-1 pc

Head-mounted version
Ampliﬁer——————————-1ﾠpc
Headset microphone —————-1ﾠpc
Micro USB charging cable———-1 pc
User manual—————————1 pc

Speciﬁcation

Ampliﬁer
Frequency Response: 80Hz-18KHz
Rated Power: 10W
Peak Power: 25W
Speaker Impedance: 4Ω
Frequency Range: 630-698MHz (frequency band)
Number of Channels: Single channel
Number of Frequencies: 50
Mute Control: pilot frequency/digital ID
Battery Type: Li-ion battery
Battery Speciﬁcation: 7.4V 2000mAh
Charging: DC 5V 1A
Charging Time: approx. 4h
Operation Time: approx. 12h @60% volume
Dimension: 11011056.6mm
Net Weight: approx. 400g

Handheld microphone
Cartridge: dynamic
Polar Pattern: unidirectional
Frequency Response: 60Hz-16KHz
Sensitivity: -55±3dB(0db=1V/Pa/m at 1KHz)
Gain Adjustment: -18dB-21dB
Transmitter Power: ≤10mW
Power Supply: 2pcs of AA batteries
Dimension: Φ36.5mm245mm(DiaL)
Net Weight: approx. 237g

Headset microphone
Cartridge: back electret cartridge
Polar Pattern: unidirectional
Frequency Response: 60Hz-16KHz
Sensitivity: -51 to -54dB(0db=1V/Pa/m at 1kHz)
Battery Type: Li-ion battery
Battery Capacity: 3.7V 400mAh
Charging: DC 5V 100mA
Charging Time: approx. 4h
Operation Time: approx. 5h
Net Weight: approx. 39g

Note: The data is tested by Takstar Laboratory and Takstar has the ﬁnal interpretation right!

Function instruction

Ampliﬁer

Power button: Long press it for 2 seconds to turn on or oﬀ the ampliﬁer. When it is turned on, the indicator lights up blue, indicating that the ampliﬁer enters the working
state.
Indicator light: When the ampliﬁer is of low battery, it lights up red; when charging, it ﬂashes red; when fully charged, it lights up blue; when in the state of wireless connection, it ﬂashes red and blue alternately.
“M” button: Press it repeatedly to turn on or oﬀ the wireless playing function. Refer to the “Frequency matching methods” for details.
“-” button: Press it to decrease the volume of the ampliﬁer.
“+” button: Press it to increase the volume of the ampliﬁer.
Charging interface: Connect to the USB data cable. Please use a charging head with a speciﬁcation of 5V 1A and 3C certiﬁcation to charge the ampliﬁer.

Handheld microphone

Power button: Press it to turn on the microphone; long-press it for 2 seconds to turn oﬀ the microphone. In the power-on state, press it repeatedly to turn on or oﬀ the mute” function.
Display screen: Display information such as working channel, microphone volume, microphone signal, battery level, etc.
CH button: Used for frequency matching. Refer to the “Frequency matching methods” for details.
∧ button: Press it to increase the volume of the microphone. In the matching state, press it to switch to the previous channel, and long-press it to quickly switch channels.
∨ button: Press it to decrease the volume of the microphone. In the matching state, press it to switch to the next channel, and long-press it to quickly switch channels.
Battery compartment: Install two AA batteries.
Battery level: It has three bars, and the number of bars is used to indicate the battery level. When the battery is low, the battery symbol ﬂashes.
Signal symbol: When the microphone is muted, the signal symbol disappears; when the mute function is canceled, the signal symbol returns to display.
Working channel/microphone volume: The current working channel is displayed by default, and there are a total of 50 working channels “CH01-CH50”. When the microphone volume is adjusted, the current microphone volume is displayed, and there are a total of 13 levels of volume “U01-U13”.

Headset microphone

Power switch: The microphone is turned on when the switch is in the ON position, and the microphone is turned oﬀ when the switch is in the OFF position.
Display screen: Display working channel and microphone volume.
M button: Used for frequency matching. Refer to the “Frequency matching methods” for details.
+ button: Press it to increase the volume of the microphone. In the matching state, press it to switch to the previous channel, and long-press it to quickly switch channels.
– button: Press it to decrease the volume of the microphone. In the matching state, press it to switch to the next channel, and long-press it to quickly switch channels.
Charging interface: Connect to the USB data cable. Please use a charging head with a speciﬁcation of 5V 1A and 3C certiﬁcation to charge the ampliﬁer.
Power indicator: When the microphone is turned oﬀ and not charging, the indicator lights oﬀ; when the microphone is turned on, the indicator lights up blue; when the battery is full, the indicator always lights up blue; when the battery is low, the indicator always lights up red; during charging, the indicator ﬂashes red, and lights up blue when fully charged.
Working channel/microphone volume: The current working channel is displayed by default, and there is a total of 50 working channels “01-50”. When you press the volume + and – buttons, the volume is displayed and returns to normal value after 3 seconds; there is a total of 6 levels of volume “U1-U6”. After 10 seconds without any operation, the display screen will automatically go out.

Instructions for use

Battery installation

Open the tail cover of the microphone counterclockwise, install 2 AA batteries according to the positive and negative polarity marked on the battery compartment (pay attention
not to install the batteries reversely), and tighten the tail cover of the microphone clockwise as shown below.

Tip: When the battery indicator on the microphone display ﬂashes, it means that the batteries are running low. Please replace them in time.

Wireless playing matching

Press the M button repeatedly to turn on or oﬀ the wireless playing function. The wireless playing function is oﬀ by default when the ampliﬁer is turned on. When the ampliﬁer is used for the ﬁrst time, it needs to connect to a mobile phone or wireless playing equipment. The steps are as follows.

Long press the power button to turn on the ampliﬁer, and then press the “M” button.
The working indicator ﬂashes red and blue alternately, indicating that it is in the state of searching and matching.
Enter the “Settings” menu of the mobile phone, ﬁnd the option of wireless playing function, and turn on the wireless playing function of the mobile phone. After searching
for “TAKSTAR E261W”, tap “TAKSTAR E261W” to connect, and the working indicator will be on again, indicating that the connection is successful.

Frequency matching methods
The frequency has been matched by default when the product leaves the factory. It will automatically connect when turned on without frequency matching. In case of signal
interference, you can try frequency matching again or frequency conversion according to the following methods.

Handheld microphone

Frequency matching method

The microphone and the receiver are turned oﬀ. First, turn on the power switch of the microphone.
Open the tail cover of the microphone and long-press the “CH” button for 3 seconds.
When the channel on the display screen changes to the “—-” dynamic display, release the button and immediately turn on the power switch of the ampliﬁer to start frequency matching. If the power switch of the ampliﬁer is not turned on within 10 seconds, the matching fails.
Frequency matching is completed in about 5 seconds. When the “—-” dynamic display on the microphone changes to channel (CHXX) static display and the sound is ampliﬁed, it indicates that the matching is successful.
If the matching fails, repeat the above steps.

Frequency conversion method

Turn on the power switches of the transmitter and the receiver when the matching is successful.
After the “CH” button of the microphone is pressed, the channel (CHXX) on the display screen ﬂashes and the microphone enters the state of frequency conversion.
Press the “∧” or “∨” button within 8 seconds to switch channels, and press the “CH” button for conﬁrmation.
If you do not press the “CH” button for conﬁrmation within 8 seconds, the frequency will automatically stop ﬂashing and the currently selected frequency will be ﬁxed.

Headset microphone

Frequency matching method

First, make sure that the headset microphone and the ampliﬁer are turned oﬀ. Then, turn on the power switch of the headset microphone, long-press the “M” button for 3
seconds, and release it when the display turns into a circle. At this time, turn on the ampliﬁer immediately. When the display on the microphone changes from a circle to a
static value, and the indicator light of the ampliﬁer changes from a fast ﬂashing blue light to steady blue light, speak into the microphone. If there is sound output, it indicates that the matching is successful. If the power switch of the ampliﬁer is not turned on within 10 seconds after the microphone enters the matching state, the matching fails and the display changes from a circle to a static value.
If there is no sound output when you speak into the headset microphone, it indicates that the matching is unsuccessful. Please try again by repeating the above steps.

Frequency conversion method

In the case of successful matching, turn on the power switches of the ampliﬁer and the headset microphone at the same time, and press the “M” button to enter the state of
frequency conversion. At this time, the value on the display screen ﬂashes. Then, you can press the volume “+”/”- ” to switch to the previous/next frequency, long-press it to quickly switch channels, and press the “M” button to conﬁrm the frequency. If you do not press the “M” button for conﬁrmation within 3 seconds, the frequency will stop ﬂashing and the currently selected frequency will be ﬁxed.

Volume adjustment method

Handheld microphone: Press the “∧” button to increase the microphone volume and the “∨” button to decrease it. The display screen changes from “U01” to “U13”
circularly (13 levels adjustable).
Headset microphone: Press the “+” button to increase the microphone volume and the “-” button to decrease it. The display screen changes from “U1” to “U6” circularly (6 levels adjustable).
The volume has the memory function. The volume displayed when the microphone is turned on is the volume displayed at the last shutdown.
If the volume button is not pressed for over 2 seconds, it will automatically exit, and the volume display “UXX” will return to the channel display “CHXX”.

Safety instruction

In order to avoid possible personal injury or property damage caused by electric shock, high temperature, ﬁre, radiation, explosion, mechanical hazards, and improper use, please read and observe the following items carefully before using the product.

When using the product, please conﬁrm whether the power of the connected device matches the power of the product, and adjust the volume of the device. Do not use it for a long time when the power of the product is exceeded or at a high volume to avoid product failure and hearing damage.
If there is any abnormality (such as smoke, odor, etc.) during use, please turn oﬀ the power switch and unplug the power plug immediately, and then send the product to the dealer for maintenance.
If the product needs to use removable batteries, it is strictly forbidden to use batteries with damaged insulation materials. Please do not charge non-rechargeable batteries.
Discarded batteries must be placed in designated classiﬁed garbage bins, and cannot be used as children’s toys or discarded directly to avoid potential safety hazards or environmental impact.
If you don’t use the product for more than a week, please take out the battery to avoid product damage due to battery leakage.
The product and accessories should be placed indoors in a dry and ventilated place. Do not store them in a humid and dusty environment for a long time. Avoid getting close to ﬁre, rain, water, excessive collision, throwing, vibrating the machine, and covering the ventilation holes during use, so as not to damage its function.
If the product needs to be ﬁxed on the wall or ceiling, please make sure to ﬁx it in place to prevent it from falling down.
When using the product, you must abide by the relevant safety regulations. Please do not use the product on occasions that are clearly prohibited by laws and regulations to avoid accidents.
Please do not disassemble, reﬁt, or repair the product by yourself to prevent personal injury. If you have any questions or service needs, please contact the local dealer for follow-up.

The meaning of icon

This symbol indicates that according to the WEEE Directive (2012 / 19 / EU) and national laws, this product should not be disposed of together with your household waste, and should be returned to an authorized recycling station of electrical and electronic equipment (WEEE) for recycling, because this type of waste has potentially harmful substances that may have a negative impact on the environment and human health. Meanwhile, when this product is disposed of properly, it is conducive to the eﬀective use of natural resources. For more information on where you can place your waste recycling equipment, please contact your local City Oﬃce, Waste Management Bureau, or Household Waste Treatment Service Department.

Scan for more product information

http://www.takstar.com/

Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang YiRd., Longxi Boluo
Huizhou, Guangdong 516121 China
Tel: 86 752 6383644 Fax: 86 752 6383952
Email: sales@takstar.com
Website: www.takstar.com

GB/T 8898-2011
9TE261WS1B