MEYER CROSS ML0935 Piper 9-Inch Brass Uplight Mini Lamp Instruction Manual
- June 5, 2024
- MEYER CROSS
Table of Contents
MINI TABLE LAMP
Save these instructions
IMPORTANT SAFETY INSTRUCTIONS:
- These instructions are provided for your safety. Please read carefully and completely before beginning the assembly and installation of this lighting fixture.
- This lighting fixture is intended for indoor use only.
- Always place the lighting fixtures on a solid, level surface.
- For use with E26 (medium) base light bulbs only.
- To avoid the risk of fire, do not exceed the maximum wattage of a 40W incandescent bulb , or 9W LED bulb , or 13W fluorescent (CFL) bulb or a 9W self-ballasted LED bulb . (Bulbs not included)
- This lighting fixture has a polarized plug (one prong is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. Do not alter the plug. Do not attempt to bypass this safety feature.
WARNINGS:
- To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug this lighting fixture and allow it to cool before attempting to replace the light bulb.
- Do not touch the light bulb while the fixture is turned on.
- Keep flammable materials away from this lighting fixture.
- Never look directly at a lit bulb.
CARE INSTRUCTIONS:
- Unplug the lamp before cleaning.
- Wipe clean with a soft, dry cloth or static duster.
- Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish
PRE-ASSEMBLY:
Carefully remove all parts and hardware from the carton, along with any protective plastic packaging. The lampshade may be covered with a plastic film that should be removed before use.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
* Part A (Shade Ring) may come pre-installed to
Part C (Socket). Unscrew Part A before installing
Part B (Lampshade), then reinstall Part A to secure.
PARTS INCLUDED:
(A*) Shade Ring
(B) Lampshade
(C) Socket
(D) Body
(E) ON/OFF Switch
For use with light bulbs with an E26 (medium) base.
DO NOT EXCEED THE SPECIFIED WATTAGE.
Made in China
ML0935 ML0936 rev121820EFS ME1A
Read User Manual Online (PDF format)
Loading......