TAKSTAR H1 All-In-One Karaoke Microphone User Manual
- June 5, 2024
- TAKSTAR
Table of Contents
TAKSTAR H1 All-In-One Karaoke Microphone
**User Manual**
Preface
Dear Customer,
Thank you for purchasing Takstar H1 All-in-one Karaoke Microphone. In order to better understand and use the product, please read this manual carefully.
If you have any questions or suggestions, please contact our local dealer.
Features
- Tailored for personal entertainment, suitable for wireless karaoke, music listening and cell phone karaoke recording.
- Wireless music playback, free from tedious wiring.
- DSP digital chip inside allows to quickly and easily switch between on- board sound effects.
- Wireless microphone grouping function for duo karaoke.
- Ducking function auto suppresses background music whenever you speak, especially convenient for streamers.
- Built-in 5W dual speakers plus dual bass, compact yet powerful, produces stereo surround sound from four directions.
- Built-in lithium-ion battery for around 6 hours of continuous use; smart power-off after 10-minutes inactivity.
- Novel and fashionable design.
Package Contents
H1 All-in-one Karaoke Microphone………………………………………………1 pc
Type-C Charging Cable……………………………………………………………1 pc
Audio Cable…………………………………………………………………………1 pc
User Manual………………………………………………………………………… 1 pc
Applications
- Suitable for wireless karaoke, music listening and cell phone karaoke recording.
Specifications
- Capsule: condenser, 16mm
- Polar Pattern: cardioid
- Frequency Response: 20Hz-20kHz
- Sensitivity: -37dB±3dBV (0dB=1V/Pa at 1KHz)
- Chip: digital DSP
- Reverberation Mode: reverb
- Speaker Power: 2*5W
- Operating Temperature: -10℃~45℃
- Battery Type: lithium-ion battery
- Battery Capacity: 2600mAh
- Battery Life: approx. 6hrs (volume at 60%)
- Charging Method: DC 5V 1A
- Charging Interface: Type-C
- Weight: approx. 350g
Note: The above data is measured by Takstar laboratory, and Takstar has the final interpretation right!
Function Descriptions
Power Button:
-
When powered off, press and hold the Power button for 2s to power on the device, which is indicated by the status indicator turning white, accompanied by a power-on voice prompt. Once powered on, the mic automatically enters Bluetooth pairing mode, and the indicator flashes white. Then, if connected successfully (prioritized to connect to previously paired device), the indicator becomes solid white, accompanied by a voice prompt: Bluetooth connected. The mic auto powers off if idle for more than 10 minutes.
-
When powered on, press and hold the Power button for 2s to power off the device, followed by the status indicator turning off and a power-off voice prompt.
-
When powered on, press Power button to switch between the following sound effects cyclically: Host (with ducking), KTV, Concert Hall, Concert, Kawaii, Robotic, Monstrous. There will be a voice prompt of the effect name as you switch.
-
When powered on, double-click the Power button to switch sound effect back to Host
Mic +/- Button:
+ button: When powered on, press Mic + to increase the mic volume which
ranges from level 0~8. There will be a beeping “di” sound when reaching the
min/max volume level.
– button: When powered on, press Mic – to decrease the mic volume which ranges
from level 0~8. There will be a beeping “di” sound when reaching the min/max
volume level.
Accompaniment +/- Button:
+ button: When powered on, press + button on the loudspeaker to increase the
volume for accompaniment which ranges from level 0~8.
There will be a beeping “di” sound when reaching the min/max volume level. The
loudspeaker volume is synchronized with that of
the connected Bluetooth device, but does not affect the mic monitoring volume.
– button: When powered on, press – button on the loudspeaker to decrease the
volume for accompaniment which ranges from level 0~8. There will be a beeping
“di” sound when reaching the min/max volume level. The loudspeaker volume is
synchronized with that of
the connected Bluetooth device, but does not affect the mic monitoring volume.
Bluetooth Button:
① When powered on, the device enters Bluetooth pairing mode by default (enable
Bluetooth on your phone, discover and tap “Takstar
H1” to pair). Press Bluetooth button to disconnect the paired device and
restart pairing, indicated by a pairing voice prompt and a flashing white LED.
② When powered on, to enter Duo mode, press and hold Bluetooth button until you see the LED flashes white and hear a pairing voice prompt. Then the mic will wait for a secondary device connection; enable Bluetooth pairing on a secondary device to pair into Duo mode.
Monitor Interface:
When powered on, to use monitoring output, connect a CTIA headphone to redirect the mic and the accompaniment output to the monitoring port. Once the headphone is unplugged, the loudspeaker resumes volume (Bluetooth accompaniment + mic).
Phone Interface:
When powered on, connect to a livestream/karaoke cell phone or tablet via a
3.5mm four-conductor (TRRS) audio cable, all sounds are
now output through the monitor interface.
Type-C Charging Interface:
Connect the charging cable via the Type-C port for charging. The LED shows red
while charging and goes off when fully charged (charges
either powered on or off).
Power Notification:
When powered on and battery level is lower than 10%, the LED flashes red, accompanied by a voice prompt: Insufficient power, please recharge in time.
Operation Instructions
I. Application Download
① Download WeSing, Chang Ba, Inke, Huajiao or alike in your cell phone’s App
Store.
② You can also download through web browser by searching the name of the App.
But make sure that the downloaded version is compatible with your phone
system.
II. Phone Karaoke, as shown in below diagram
- Connect the headphone to the mic’s headphone interface.
- Connect the headset interface of the cell phone through an audio cable.
- Open WeSing or other karaoke software to start karaoke recording.
III. Computer Karaoke
- Connect the headphone to the mic’s headphone interface.
- If the computer audio interface is single-port, simply connect the computer audio interface to the mic’s phone interface using the supplied audio cable; if the computer audio interface is two-port, connect one end of the supplied audio cable to the mic’s phone interface, and the other end to a Y-splitter audio cable (not included). The two split ends should connect to the respective headphone/microphone port on the computer.
- Open the computer PC karaoke software to start karaoke recording. (Adjust the recorder device volume on computer if the recorded sound is too loud.)
IV. Living Room Karaoke
Living room karaoke is similar to phone karaoke. Simply connect the active speaker to the mic’s headphone interface, and connect the cell phone to the mic’s phone interface.
Tips:
- To prevent feedback when using active speaker for karaoke, please point the pickup end of the mic away from the active speaker, keep at a proper distance, and lower the mic volume or the active speaker volume.
- It’s not advised to record with your cell phone karaoke App while playing with active speaker, because the mic would pick up sound from the speaker as well, resulting in muddy recording.
V. Charging Description
-
Charge via a mobile power bank, computer USB or power adapter.
Note: power adapter specifications can be DC 5V/1A, 5V/1.5A, or 5V/2A. -
The mic is out of battery when the power indicator does not light up when you try to power on the device. The power LED lights up red to indicate low power, which requires charging in time.
-
The power LED flashes red while charging and goes off when fully charged. When charging at DC 5V/1A, a full charge takes about 2.5 hours. Please stop charging when the battery is full to prevent overcharging. Tips: Do a full charge upon first use. It can be charged while in use or when powered off. If unused for long periods of time, please recharge the mic once every six months to prevent over-discharging and degradation of battery.
Troubleshooting
I. The indicator LED does not light up after the mic is turned on Check if the
mic has enough power, you can recharge the mic and
recheck.
II. No sound when playing music
- Check if the mic is successfully connected to the cell phone.
- Check if the headphone or headphone plug is properly connected.
- Check if the cell phone is playing normally, close the playback software and reopen it to see if it returns to normal.
- Check if the cell phone volume is set too low, adjust the phone volume and see if it returns to normal.
III. Cannot hear the mic through monitor
- Check if the headphone is successfully connected to the mic.
- Check if the mic is turned on properly.
- Check if the mic volume is set too low, adjust and see if it returns to normal.
IV. Recorded sound has no sound effect
- Check if the wire between the mic and the cell phone or computer is properly connected, unplug and retry.
- Check if the mic interface is connected incorrectly. For example, if the audio cable is connected to mic accompaniment port by mistake, the mic sound cannot be recorded. Please reconnect the cable to the Phone Interface on the mic, then unplug and re-plug the other end on the cell phone to retry.
V. Cannot record the mic sound or the recorded sound is too low
- Check if the wire between the mic and the cell phone is properly connected, unplug and retry.
- Check if the mic volume is set too low, adjust and see if it returns to normal.
- Check if the mic volume on the recording software is set too low, adjust and see if it returns to normal.
VI. Feedback howling in monitoring headphone
- Check if the headphone is properly connected, unplug and retry.
- Please turn off the monitoring function in App when using a cell phone.
VII. Echo on computer live stream
In Group Chat mode of the computer livestreaming platform, enabling mixing
function will redirect the group member’s sound to your
chatroom, causing the audience to hear echo. Please turn off mixing function
in Group Chat mode. Mixing function does not cause this
problem in other modes.
VIII. Echo on phone live stream
Some mobile livestreaming App does not have disable setting for monitor
function, which would cause echo when monitoring from
headphone. In this case, please lower the volume of the livestreaming phone to
the minimum.
Label Meanings
According to the test results obtained based on RL2004/108/EG (Electromagnetic Compatibility Directive) and RL2006/95/EG (Low Voltage Directive), this product complies with the limits specified in the European Community EMC (Electromagnetic Compatibility) Directive, an integration of relevant laws from its member states.
This symbol indicates that, according to WEEE (Waste of Electrical and Electronic Equipment) Directive (2012/19/EU) and national laws, this type of waste should not be discarded along with your household waste, as it contains potentially hazardous substances that may pose a negative impact on the environment and human health. It should be handed over to an authorized WEEE collection facility for recovery and recycle. Herewith you will be helping effective utilization of natural resources. For more information on disposal of WEEE products, please contact your local municipality, waste management bureau or household waste disposal service.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
About This Manual
This manual contains up-to-date technical specifications as of printing.
However, specifications contained herein may not conform to your particular
product since Takstar is constantly improving its products. For the latest
version/more information, please visit our website:
https://www.takstar.com/.
Specifications, devices or accessories available may vary from region to
region. If you have any questions, please contact our local dealer.
Scan for more product information
sales@takstar.com
www.takstar.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>