scandomestic WAH 1707 W Washing Machine User Manual

WAH 1707 W
User manual

www.scandomestic.dk

Scandomestic A/S · DK-8600 Silkeborg
Tel.: + 45 7242 5571

Safety Instructions

Warning!
Use all instructions and explanations of the installation before use. Follow the instructions carefully. Keep the operating instructions handy for later use. If the application is sold or passed on then ensure that the new owner always receives those operation instructions.
Safety Instructions
For your safety,the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life. Explanation of the symbols:

Warning!
This combination of symbol and signal word indicates a potentially dangerous situation that may result in death or serious injuries unless it is avoided.

Caution!
This combination of symbol and signal word indicates a potentially dangerous situation that may result in slight or minor injuries or damage to property and the environment.
Note!
This combination of symbol and signal word indicates a potentially dangerous situation that may result in slight or minor injuries.

Electric shock hazard

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• The new hose-sets supplied with the appliance are to be used and the old hose sets should not be reused.
• Before any maintenance of the device, unplug the appliance from the mains.
• Always unplug the machine and turn off the water supply after use. The max. inlet water pressure, in pascals. The min. inlet water pressure, in pascals.
• To ensure your safety, the power plug must be inserted into an earthed three-pole socket. Check carefully and make sure that your socket is properly and reliably earthed.
• Make sure that the water and electrical devices must be connected by a qualified technician in accordance with the manufacturer’s instructions and local safety regulations.

Risk to children!

• EN countries: the appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Children of less than 3years should be supervised to ensure that they do not play with appliances.
• Animals and children may climb into the machine. Check the machine before every operation.
• Kids should be supervised that they do not play with the appliance.
• The glass door may be very hot during the operation. Keep kids and pets far away from the machine during the operation very wet rooms as well as in the rooms with explosive or caustic gas.
• Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result.
• Plug must be accessible after installation.

Risk of explosion!

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances( such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) This may result in fire or explosion.
• Beforehand thoroughly rinse items of washing by hand.

Installing the product!

• This washing machine is for indoor use only.
• It isn’t intended to be built-in use.
• The openings must not be obstructed by a carpet.
• Washing machines shall not be installed in bathrooms or very wet rooms as well as in rooms with explosive or caustic gases.
• The washing machine with a single inlet valve only can be connected to the cold water supply. The product with double inlet valves should be correctly connected to the hot water and cold water supply.
• Plug must be accessible after installation.
• Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result.

Risk of damaging appliance!

• Your product is only for home use and is only designed for textiles suitable for machine washing.

• Do not climb up and sit on top cover of the machine.

• Do not lean against the machine door.

• Cautions during Handling Machine:
  1 Transport bolts shall be reinstalled to the machine by a specialized person.
  2 The accumulated water shall be drained out of the machine.
  3 Handle the machine carefully. Never hold each protruded part on the machine while lifting. The machine door can not be used as the handle during the conveyance.
  4 This appliance is heavy. Transport with care.

• Please do not close the door with excessive forces. If it is found difficult to close the door, please check if the clothes are put in or distributed well.

• It is forbidden to wash carpets.

Operating the appliance!

• Before washing the clothes at the first time, the product shall be operated in one round of the whole procedure without the clothes inside.
• Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol etc. Shall not be used as detergents. Please only select the detergents suitable for machine washing, especially for drum.
• Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooch, nails, screws or stones etc. may cause serious damage to this machine.
• Please check whether the water inside the drum has been drained before opening its door. Please do not open the door if there is any water visible.
• Be careful of burning when the product drains hot washing water.
• Never refill the water by hand during washing.
• After the program is completed, Please wait for two minutes to open the door.

Packaging/Old appliance

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material re- sources. To return your used device, please use the collection systems or contact the retailer where the product was purchased. They return and can take this product for environmentally safe recycling.
Warning!
This appliance is intended to be used in households and applications such as Staff kitchen areas in shops, offices and other working environments;

• Farm housed;
• By clients in hotels, motels and other residential type environments;
• Bed and breakfast type environments;
• Areas for communal use in blocks of flats or in launderettes;

Installation

Before installing the machine, the location characterized as follows shall be selected:
Installation area
Stability is important to prevent the product from wandering!

• Make sure that the product should not stand on the power cord.
• Rigid, dry, and level surface
• Avoid direct sunlight
• Sufficient ventilation
• The room temperature is above 0℃
• Keep far away from the heat resources such as coal or gas.
• Minimum 20 mm space from walls to appliance

Unpacking the washing machine
Warning!
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation! Keep all packaging well away from children.

1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing. Make sure the small triangle foam is removed with the bottom one together. If not, lay the unit down with side surface, then remove the small foam from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.

Remove transport bolts
Warning!
You must remove the transport bolts from the backside before using the product. You will need the transport bolts again if you move the product, so make sure you keep them in a safe place. Please take the following steps to remove the bolts:

1. Loosen 4 bolts with a spanner and then remove them.
2. Stop the holes with transport hole plugs.
3. Keep the transport bolts properly for future use.

Leveling the washing machine
Warning!
The lock nuts on all four feet must be screwed tightly against the housing.

• Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions tighten the nuts.
• Loosen the lock nut turn the feet until it closely contacts with the floor.
• Adjust the legs and lock them with a spanner, make sure the machine is steady.

Connect Water Supply Hose
Warning!

• To prevent leakage or water damage, follow the instructions in this chapter!
• Do not kink, crush, modify or sever the water inlet hose.
• For the model equips hot valve, connect it to hot water tap with hot water supply hose. Energy consumption will decrease automatically for some programs.

1 Connection between water supply and inlet hose.

2 Connect the other end of inlet pipe to the inlet valve at the backside of product and fasten the pipe tightly clockwise.

Drain Hose
Warning!

• Do not kink or protract the drain hose.
• Position drain hose properly, otherwise damage might result of water leakage.
  There are two ways to place the end of drain hose:
  1 Put it into the water trough.

2 Connect it to the branch drain pipe of the trough.

Note!
If the machine has drain hose support, please install it like the following.

Warning!

• When installing drain hose, fix it properly.
• If drain hose is too long, do not force it into washing machine as it will cause abnormal noises.

Before Each Washing

• The working condition of the washer should be (0-40)℃. If used under 0℃, the inlet valve and draining system may be damaged. If the machine is placed under a condition of 0℃ or less, then it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen before use.
• Please check the labels and the explanation of using detergent before wash. Use non-foaming or less-foaming detergent suitable for machine washing properly.

Check before each wash

• Check the label
• Put small clothes into the pillow slip
• Take out the items out of the pockets
• Turn easy-pilling and long-pile fabric inside out
• Knot the long strips,zip or button
• Separate clothes with different textures

Warning!
When washing a single clothes, it may easily cause great eccentricity and give alarm due to great unbalance. Therefore it is suggested to add one or two more clothes to be washed together so that draining can be done smoothly.
Don’t washing the clothes touching with kerosene, gasoline, alcohol and other flammable materials.

Detergent Dispenser
I Pre Wash detergent
II Main Wash detergent

• Softener

Caution!
Detergent only need to be added in “case I “after selecting pre-washing for machines with this function.

| X| O

X = means must
O = means optional
Note!
As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box, it is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked and overflowing while filling water. Please choose suitable type of detergent for the various washing temperature to get the best washing performance with less water and energy consumption.
Cleaning And Care
Warning: Before your maintenance starts, please unplug the machine and close the tap.
Cleaning The Cabinet
Proper maintenance on the washing machine can extend its working life.
The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use the wet cloth to wipe it off immediately. No sharp items are allowed.
Note: Formic acid and its diluted solvents or equivalent are forbidden, such as alcohol, solvents or chemical products, etc.
Cleaning The Drum
The rusts left inside the drum by the metal articles shall be removed immediately with chlorine-free detergents.
Never use steel wool.
Note: Don’t put laundry in the washing machine during the drum cleaning.
Cleaning The Door Seal And Glass

Wipe the glass and seal after each wash to remove lint and stains. If lint builds up it can cause leaks.
Remove any coins, buttons and other objects from the seal after each wash.

Cleaning The Inlet Filter
Note: Inlet filter must be cleaned if there is less water.
Washing the filter in the tap

1.  Close the water supply
2.  Remove the water supply hose from the tap.
3. Use an old toothbrush or similar small brush to clean the filter.
4. Reconnect the water supply hose.

Washing the filter in washing machine:

1. Screw off the inlet pipe from the backside of the machine.
2.  Pull out the filter with long nose pliers and reinstall it back after being washed.
3. Use an old toothbrush or similar small brush to clean the filter.
4. Reconnect the inlet pipe.

Note: It is possible to pull out the filter and wash it separately.

Clean The Detergent Dispenser

Press down the arrow located on the softener cover inside the dispenser drawer.
Lift the clip up and take out the softener cover and wash all grooves with water.
Restore the softener cover and push the drawer into position.

1. Pull out the dispenser drawer with press the A
2. Clean the dispenser drawer underwater
3. Clean inside the recess with an old toothbrush
4. Insert the dispenser drawer

Note!
Do not use alcohol, solvents or chemical products to clean the machine.

Cleaning The Drain Pump Filter
Warning: Be careful of the hot water!

• Allow the detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• A drain pump filter can filter the yarns and small foreign matters from the washing.
•  Clean the filter periodically to ensure the normal operation of the washing machine.

Open the lower cover cap

Rotate 90°C and pull out the emergency drain hose, and take off the hose cap

After water runs out,reset the drain hose

Open the filter by turning to the counterclockwise

Remove extraneous matter

Close the lower cover cap
Caution!

• Make sure that the valve cap and emergency drain hose are reinstalled properly, cap plates should be inserted aligning to hole plates otherwise water may leak.
• Some machines don’t have an emergency drain hose, so step 2 and step 3 can be skipped. Rotate the lower cover cap directly to make water run into the basin.
• When the appliance is in use and depending on the program selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.

Trouble Shooting

The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service centre.

the door is closed

Check if the clothes is stuck

The door can be not be opened| The washer safety pro- tection design is working| Disconnect the power, restart the product
Water leakage| The connection be- tween inlet

pipe or outlet hose is not tight

| Check and water pipes fasten  outlet Clean up hose

Detergent residue in the box

| Detergent is damp- ened or agglomer- ated| Clean and wipe de- tergent
The indicator or display does not light| Disconnect the power PC board or harness has a connection problem| Check if the power is shut down and the power plug is connected correctly
Abnormal noise| | Check if the fixing (bolts) has been removed Check it’s installed on a solid and level floor

Error codes:

door is closed Check if the clothes is stuck
Off Flash Off Off Off| Water inject- ing problem while washing| Check if the water pressure is too low

Straighten the water pipe

Check if the inlet valve filter is blocked

Off Flash Flash Off Off| Overtime water  draining| Check if the drain hose is blocked
Off Flash Off

Off Off

| Water over-flow| Restart the washer
| Others| Please try again first, call up

service line if there are still troubles

Note: After the check, activate the appliance. If the problem occurs or
the display shows other alarm codes again, contact the service.

Technical Specifications

Model ………………………………………………………………………. WAH 1707 W
Washing capacity …………………………………………………………………. 7.0 kg
Dimension (HxWxD mm) …………………………………… 850 x 595 x 495 mm
Net Weight …………………………………………………………………………… 60 kg
Rated power ………………………………………………………………………. 2050W
Power Supply ……………………………………………………….. 220-240V~,50Hz
MAX.Current ………………………………………………………………………….. 10A
Standard Water Presure ………………………………………….. 0.05MPa~1MPa

Product Description

A Water supply hose
B Detergent dispenser
C Door
D Top cover
E Control panel
F Power supply cord
E Drum
H Service filter
I Drain hose
Note: The product line chart is for reference only, please refer to real product as standard.

Accessories

• Transport hole plugs
• Supply hose cold water
• Supply hose warm water (optional)
• Drain hose support (optional)
•  User manual

Control Panel

Note: The chart is for reference only, Please refer to real product as standard.
1 On/Off
The product is switched off.
2 Option
This allows you to select an additional function and will light when selected.
3 Start/Pause
Press the button to start or pause the washing cycle.
4 Programmes
Available according to the laundry type.

Operation

Delay:
Delay function can be set with this button, the delaying time is 0-24H.
Spin Speed:
It can be set the spin speed to press the button repeatedly
Extra Rinse:
The laundry will undergo extra rinse once after you select it.

Other Functions
Mute the buzzer

1. Choose the Programme
2. Press the [Delay]button for 3sec.the buzzer is mute.
   To act the buzzer function, press the button again for 3 seconds. The setting will be kept until the next reset.

Caution: After Muting the buzzer function, the sounds will not be activated anymore.
Child Lock  To avoid misoperation by children.

1. Choose the Programme
2. Start
3. Press [Extra Rinse] and [Spin Speed] 3 sec. till buzzer beep.

Caution: When the child lock is activated and the program starts, the child lock indicator will switch on, and the CL and remaining time on the display are alternately displayed in 0.5s. Pressing the other buttons will make the child lock indicator flash for 3s. when the program finish, CL  and END alternate for 10s in 0.5s, then the child lock lights flash for 3s.

• Only pressing and holding the two-button can release the child lock, even power off, switch off, and program end
• The “Child Lock” will lock all buttons except the Power button and Child Lock button please release the child lock before selecting the program and start washing. Speed The speed is: 1000: 0-400-600-800-1000 1400: 0-400-600-800-1000-1200-1400

Programs

Programs are available according to the laundry type.
Synthetic
Wash synthetic articles, for example, shirts, coats, blending. While washing the knitting textiles, the detergent quantity shall be reduced due to its loose string construction and easily forming bubbles.
Delicate
For delicate, washable textiles, e.g. made of silk, satin, synthetic fibers or blended fabrics.
Drum Clean
It applies 90 °C to high-temperature sterilization to make the clothes washing green. When this procedure is performed, the clothes or other washing cannot be added. When proper amount of chlorine bleaching agent is put in,the barrel cleaning effect will be better. The customer can use this program regularly according to the need.

Spin Only
Extra spin with selectable spin speed.
Rinse &Spin
Extra rinse with spin.
Drain Only
Drain off the water.
Quick Wash
It is suitable for washing few and not very dirty clothes quickly.
Cotton Intensive
To increase the washing effects, washing time is increased.
ECO 40-60
Default 40℃,not selectable, suitable for laundry washing at about 40℃-60℃.
Cold Wash
Coldwater to wash clothes.
Cotton
Hard-wearing textiles, heat-resistant textiles made of cotton or linen.
Mix
You can select this procedure wash the tough clothes, that need much more time and strength.It is used for the daily clothes of cotton, such as sheets, chains, pillowcases bathrobe and underwear.

Washing Programmes Table

The new EU energy efficiency class is E
Energy test program: ECO 40-60. Speed: the highest speed; Other as the
default. Half load for 7.0Kg machine:3.5Kg.
Quarter load for 7.0Kg machine:2.0Kg.
The old EU energy efficiency class is A
Energy test program: Cotton Intensive 60°C/40°C.Speed: the highest
speed; Other as the default. Half load for 7.0Kg machine:3.5Kg.
Note: The parameters in this table are only for the user’s reference. The actual parameters are maybe different from the parameters in the above- mentioned table.
Access to professional repair, such as internet webpages, addresses, and contact
details. Model no: WAH 1707 W

Relevant information for ordering spare parts, directly or through other channels provided by the manufacturer, importer or authorised representative;| Scandomestic A/S
The minimum period during which spare parts, necessary for the repair of the appliance, are available;| 10 years
Instruction on how to find the model information in the product database, as defined in Regulation (EU) 2019/2019 by means of a weblink that links to the model information as stored in the product database or a link to the product database and information on how to find the model

identifier on the product.)

| www.scandomestic.dk

Note: The address or contact phone number of the service site is subject to change without prior notice. Please confirm whether the service station is a directly affiliated one of our company when requiring services.

References

• Scandomestic | Scandomestic.dk
• Scandomestic | scandomestic.dk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>