ZVOLTZ 2BFZ7ZXC Levitating Bluetooth Speaker User Manual
- June 1, 2024
- ZVOLTZ
Table of Contents
Levitating Bluetooth speaker
user’s manual
Zhaoqing Zhixuan Technology Co., LTD
2BFZ7ZXC Levitating Bluetooth Speaker
Magnetic levitation product operating instructions
Thank you very much for buying this product!
Follow the instructions below and you will have a magical and amazing
experience!
The product list is as follows
- 1 suspension bracket
- 1 floating flower ball
- 1 power adapter
- 1 copy of manual
- 1 auxiliary tool
Operation guidance:
- Please place the product on a level table. If the table is uneven, the suspended material may not be able to levitate.
- Plug one end of the power adapter into the power outlet and the other end into the DC hole of the frame. Touching the switch on the right side of the product will light up
- Plug one end of the power adapter into the power outlet and the other end into the DC hole of the frame. Touching the switch on the right side of the product will light up
- As shown in Figure 3, the suspended object can begin to rotate by gently stirring the top of the suspended object with the hand
The following conditions may cause suspended matter not to be suspended
This switch is a touch switch identifier.
Those with this logo on the outer frame have touch switches.
The light is on or the light is off.
Bluetooth name: CXF-06
matters need attention:
The light source of this lamp is not replaceable, please do not disassemble
this product yourself, otherwise it will cause damage to the product, and even
can not be suspended
Indoor only, do not place on the slope of no more than 6 degrees.
Do not use this product in a humid environment.
If you do not use this product for a long time, please disconnect the power
supply
Children under the age of 14 must be supervised by an adult. Please use the
power adapter that comes with the product
If you use another power adapter, select a 12V1A certified power supply.
Astigmatism people, children should not look at the product light source for a
long time
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception,which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.