MUSCLED MDM-D88 Dual Adjustable Pulley Trainer Instruction Manual

MUSCLE D FITNESS
15950 Downey Avenue
Paramount, CA 90723
888-532-1413

ASSEMBLY INSTRUCTIONS

88” DUAL ADJUSTABLE PULLEY MDM-D88
STEP 1

1. Connect overhead Chin Bar to 2 side weight frames.
2. Connect 2 back tubes to side frames.

STEP 2

STEP 3

1. Remove nuts, bolts, washers and spacers from the top of the 4 guide rods.(Caution:
   Be careful not to lose any and be 100% certain to replace in the same orders shown)

2. Slide top plate with cable, stem and red bushings over the top of the guide rods.

3. slide selector plates one at a time onto the guide rods and lower slowly. There are 19 selector plates per side.

4. Reinsert all the hardware on the guide rods.

STEP 4

Slide weight stack protective shrouds into the metal grooves on each side of the weight frames with the shrouds bowing out from the back of the selector weight stacks.

Thank You

Documents / Resources

| MUSCLED MDM-D88 Dual Adjustable Pulley Trainer [pdf] Instruction Manual
MDM-D88 Dual Adjustable Pulley Trainer, MDM-D88, Dual Adjustable Pulley Trainer, Adjustable Pulley Trainer, Pulley Trainer, Trainer
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>