EPIC OFFICE MODZA06 Modulus Twin Pole Double Span Table Instruction Manual
- June 13, 2024
- EPIC OFFICE
Table of Contents
EPIC OFFICE MODZA06 Modulus Twin Pole Double Span Table
Product Information
| Component | Quantity | Part Number |
|---|---|---|
| Die Cast Upper Wrist | 1 | MODZA06 |
| Top Rail | 2 | FWTOPRAIL |
| Bottom Rail | 2 | FWBOTRAIL |
| Large Foot | 6 | MODZA12 |
| Small Foot | 4 | MODZA02 |
| Cross Collar | 8 | MODZA01 |
| Bottom T-Connector | 2 | MODZA07 |
| Bottom Cross Connector | 1 | MODZA08 |
| T-Tube | 6 | FW…SET |
| Collar Plug | 4 | MODZA15 |
| Foot Glide | 6 | MODZA25 |
| Top Rail Cap | 4 | MODZA18 |
| Steel Wrist Wrap | 3 | FW…SET |
| Plastic Support | 4 | MODZA16 |
| Table Top Bracket Plate | 2 (Not supplied if frame only) | |
| Worktop | 2 |
Product Usage Instructions
- Begin with the End Leg Assembly:
- Attach 1 Die Cast Upper Wrist using 6 MODZA06 parts.
- Attach 2 Top Rail using 4 FWTOPRAIL parts.
- Attach 2 Bottom Rail using 2 FWBOTRAIL parts.
- Attach 6 Large Foot using 6 MODZA12 parts.
- Attach 4 Small Foot using 4 MODZA02 parts.
- Attach 8 Cross Collar using 8 MODZA01 parts.
- Attach 2 Bottom T-Connector using 2 MODZA07 parts.
- Attach 1 Bottom Cross Connector using 1 MODZA08 part.
- Attach 6 T-Tube using 6 FW…SET parts.
- Attach 4 Collar Plug using 4 MODZA15 parts.
- Tighten all small grub screws located on the bottom of each upper wrist.
- Continue with the Mid Leg Assembly:
- Attach 2 Top Rail using 4 FWTOPRAIL parts.
- Attach 6 Large Foot using 6 MODZA12 parts.
- Attach 4 Small Foot using 4 MODZA02 parts.
- Attach 8 Cross Collar using 8 MODZA01 parts.
- Attach 1 Bottom T-Connector using 1 MODZA07 part.
- Attach 6 T-Tube using 6 FW…SET parts.
- Tighten all small grub screws located on the bottom of each upper wrist.
- Assemble the Table Top:
- If using a multi-piece worktop, place it on the frame in its final position.
- Attach 2 Table Top Bracket Plates (if supplied).
- Attach 12 M5 x 25mm Self Tapping screws.
- Attach 14 M4 x 20mm Self Tapping screws.
- Optional: For extra strength, screw the plastic support brackets onto the top rails.
Note: Tools required for assembly: Powered Screwdriver.
Components List
Assembly Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>