scandomestic ST-66 Can Cooler Instruction Manual
- June 6, 2024
- scandomestic
Table of Contents
OPERATING INSTRUCTIONS
CAN COOLER
ELECTRICAL DIAGRAM (Static)
ELECTRICAL DIAGRAM (Ventilated)
PRODUCT INTRODUCTION:
Cylinder Refrigerator is our special design for the drink manufacturers and distributors. The product is a new unique design with strong advertisement image promotion. Imported compressors with CFC free refrigerant are used. Fully foamed cabinet and cover door with ABS for beautiful look and efficient cool keeping.
The features of the products are high efficient, fast cooling, low noise, very convenient. It can be widely used for the refrigeration of drink and low freezing of food by stores, family, special users. And it is a very good brand image promotion for food and drink brands. It is a very unique commercial refrigeration product. Commercial refrigeration display cooler.
OPERATION PROCESS:
- Temperature Control Indicator “0” – “7” shows the operation from weak cooling to strong cooling.
- If the Thermostat Knob is turned from left to right, while the Temperature Control Indicator is changed from “0” to “7” the temperature inside the cabinet will go down. In normal condition, the temperature inside the refrigerating cabinet will be 0-10 , but maybe under 0 after running long-time.
CONTROL PANEL
- In normal condition, please keep the Temperature Control Indicator at the position on “4” -“5”.
- If the Thermostat Knob is turned at the position “7”, (Turn maximumly from left to right), the freezer will be at fast freezing condition, and the compressor will keep continuous running.
- The Thermostat Knob can not be turned from “7” to “0”. Otherwise the thermostat will be damaged.
NOTICE:
-
Please turn the power on and check whether the unit is running. About 30 minutes later, the temperature inside the cabinet will go down apparently. After confirming the freezer has been completely cooled down (It takes 2-3 hours to get the first time to freezing temperature), please put into the food.
-
It is not allowed to put into too much food at the same time.
-
Please let the hot food cool down to normal temperature before putting into the freezer. It may affect the freshness keeping and increase energy consumption.
-
Please keep certain space between food and food. Otherwise it will affect the cooling circulation.
-
Do not put ice cream into the cabinet, otherwise the ice cream may be turned soft or melt.
-
Do not keep the door opened for a long time in operation condition.
-
When the power is cut, please do not open the door frequently to avoid cool leakage. If the power is off for a long time, dry ice or cold-storage block can be put inside.
-
Please call maintenance engineer when the power cord is damaged. Special tools are required.
-
Do not touch the compressor by hand to avoid damage of burning.
-
While the unit is not used for a long time, please:
Take out all the food and unplug the power cord;
Open the door, clean the inside cabinet and wipe off the water. -
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
-
This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they do not play with the appliance.
-
Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
-
Do not damage the refrigerant circuit.
Access to professional repair, such as internet webpages, addresses, contact details.
Model no: ST 66
Aftersales service station list:
| Address | Scandomestic A/S |
|---|---|
| Contact Number | 7242 5571 |
| Website | Scandomestic.dk |
| QR code | 414286 |
Relevant information for ordering spare parts, directly or through other
channels provided by the manufacturer, importer or authorised representative;|
Scandomestic A/S
The minimum period during which spare parts, necessary for the repair of the
appliance, are available;| 8 years
Instruction on how to find the model information in the product database, as
defined in Regulation (EU) 2019/2024 by means of a weblink that links to the
model information as stored in the product database or a link to the product
database and information on how to find the model identifier on the product.)|
www.scandomestic.dk
Note: The address or contact phone number of the service site is subject to change without prior notice. Please confirm whether the service station is a directly affiliated one of our company when requiring services.