REYEE RG-RAP2200 Wi-Fi 5 1267Mbps Ceiling Access Point Installation Guide
- October 27, 2023
- REYEE
Table of Contents
REYEE RG-RAP2200 Wi-Fi 5 1267Mbps Ceiling Access Point
Packing List
| Item | Name | Quantity | Unit |
|---|---|---|---|
| 1 | RG-RAP2200(F)Host | 1 | Set |
| 2 | Mounting Bracket | 1 | Piece |
| 3 | Phillips Pan Head Screw | 2 | Piece |
| 4 | Expansion Anchor | 2 | Piece |
| 5 | This Quick Installation Guide | 1 | Copy |
| 6 | Warranty Card | 1 | Copy |
Appearance and Interface
Top View
Bottom View
Note:
-
Reset button
-
LAN2 port
-
LAN 1 /PoE port
-
DC-12V power port
-
When powering the AP through PoE, connect one end of the Ethernet cable to LAN 1 /PoE port and the other end to a PoE-capable device.
-
When powering the AP via local power supply, connect the DC- 12V/1.5A power adapter to the power port.
LED Indicator and Button
| LED Indicator and Button | Frequency | Description |
|---|---|---|
| LED Indicator | Solid green | Normal operation |
| Off | The AP not receiving power. | |
| Blinking(0.5Hz) | Normal operation, but the AP is not connected to Ruijie |
Cloud.
Fast blinking(10Hz)| Possible cases:
- Restoring the factory default settings
- Upgrading the firmware
- Restoring the image file
- Initializing the device
Reset Button| Press for less than 2 seconds| Restart the device
Press for more than 5 seconds| Restore the factory default settings
Product Installation
Attach the mounting bracket on the
ceiling. Connect the Ethernet cable to the LAN port. Align the square feet on
the rear of the AP over the mounting holes on the bracket. Slide the AP into
the holes until it clicks into place.
Network Configuration
-
(Recommended)
Scan the QR-code on the manual or device to download the Ruijie Cloud App, and configure the network according to guide on App.
-
Connect to the SSID (@Ruijie-mxxxx when there are multiple devices and @Ruijie-sxxxx when there is only one device), or connect the cable with LAN port, and visit http://110.44.77.253 (default password: admin). It is recommended to configure the IP address as 10.44.77.250.
Note:
This equipment is restricted to indoor operation in 5.15-5.25GHz for Hong
Kong.