Elpas Baby tag b610 + Active Electronic Tag Instruction Manual

Baby label B610+ instruction manual

Overview

 background

Baby tag b610 + is an active electronic tag specially used in infant anti- theft systems. It not only has the characteristics of waterproof, anti-falling off, and anti-cutting, but also can realize the accurate positioning of the baby and the matching function with the nurse and the mother, so as to provide all-around protection for the baby and provide more efficient management for the hospital.

application fields and objects

This product is suitable for major hospitals, combined with the Yihui baby anti-theft system, to provide a full range of anti-theft monitoring for newborn infants.

use environment

10 ∼ 55Hz    X, Y, and Z-axis

3| humidity| operation| 5% ∼ 95%
Storage| 10% ∼ 90%

technical features

• Exquisite ergonomic design
• Precise positioning, movement monitoring, and mother-infant matching
• Rechargeable, real-time voltage monitoring, low power automatic alarm
• Wristband cutting alarm, label falling off alarm
• Ipx7 waterproof can be repeated cleaning, water can work normally
• Passed the high standard FDA certification, without any allergic reaction
• In line with gb9175-88, GB8702-88 national radiation safety standards

Main technical parameters and functions

technical indicators

than 7 days
5| Battery Specification| 80mAh
6| Dimensions (L w h)| 34. 5mm27. 5mm14. 5mm

overall dimensions

Mechanical dimension (L w h): 34.5mm 27.5mm 14.5mm

main function description

• Heartbeat signal: the label sends a heartbeat signal every certain time;
• Low voltage alarm: when the battery voltage is lower than the preset value, the background software will get the current battery voltage information of the tag and remind
• Cut alarm: when the wristband is connected, if the wristband is disconnected due to falling off or cutting, the label will send an alarm signal;
• Low-frequency precise positioning: when the label is within the positioning range of the locator, the positioning signal will be sent continuously. When the label goes out of the designated access control range, the exit alarm will be triggered;
•  Skin sensing: when wearing a label, the label itself can sense whether the label is in contact with the skin;
• Motion detection: it can detect whether the tag is still or moving;
•  Mother-infant pairing: with the use of the mother label, mother-infant pairing can be realized.

Use and operation

wearing steps and methods

Step 1: Open the package and take out the wristband. The color of the wristband is optional (usually blue for boys and pink for girls)
Step 2: Insert one end of the wristband into the interface on one side of the label according to the direction shown by the arrow at one end of the wristband
Step 3: put the baby label on the baby’s ankle:
Step 4: Insert the other end of the wristband into the interface on the other side of the label, and adjust the length so that the bottom of the label just contacts the skin
Step 5: cut off the wristband beyond the interface with scissors

 working state indication

• Heartbeat signal: the label sends a heartbeat signal every 15 seconds, and the blue indicator light flashes once;
• Low voltage alarm: when the battery voltage of the label is lower than 2.4V, the red indicator light flashes continuously;
• Wearing instructions: when the label is worn, the red the indicator light flashes once, and the buzzer sends out a sound;
• Cutting alarm: if the wrist strap falls off or is cut off, the blue the indicator light of the label flashes continuously for 10 times (lasting for 5 s), and the buzzer sends out three beeps at the same time;
•  Low-frequency precise positioning: when the locator is within the positioning range, the blue indicator light of the label flashes continuously;
• Skin induction: after wearing the baby label, the label does not sense skin contact, the red indicator light flashes once every 3 seconds and the red indicator light goes off when touching the skin;
• At the same time, press the mother’s red label to indicate the mother’s beep when matching a long label within 10 cm.

Common troubleshooting

replace the battery
Damage indicator| Return to original factory for maintenance
Red light flashing| Label not in contact with| Rewear to ensure skin contact
after wearing| skin|
| Internal hardware exception| Return to original factory for maintenance
There was no response to the infant label in the paired relationship test| The distance between the two labels is too
far| Keep labels within 10 cm apart
| Abnormal operation of baby label| Replace the baby label with a new one
| Abnormal mother label work| Replace the mother label with a new one
The red indicator is flashing continuously| Low power| Return to the factory and replace the battery
The red and blue indicator lights        are always on at the same time| Internal hardware exception| Return to original factory for maintenance
………………….| …………………|

 Maintenance and precautions

• Keep the label surface dry, especially after the baby bath, remember to
  wipe the water clean;

• Do not repair, disassemble or transform by yourself;

• When not in use, do not place the label within the positioning range of
  the locator;

• When not in use, do not put the label near corrosive articles;

•  Please use under normal temperature and humidity.

FCC ID: 2AX8K-B610

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>