REYEE NBS3100-8GT2SFP 10-Port Gigabit Layer User Guide
- June 9, 2024
- REYEE
Table of Contents
REYEE NBS3100-8GT2SFP 10-Port Gigabit Layer
Before You Begin
Package Contents
You can retrieve product supporting documents at https://www.ruijienetworks.com. Click Support > Technical Documents, and download the documents you need.
Installation and Networking
The RG-NBS3100-8GT2SFP switches follow the EIA standard dimensions and can be
installed in 19-inch rack.
The steps of Installation are as follows:
- Take out two L-shape mounting brackets and six M3x6 FMO countersunk head screws
- Attach the mounting brackets to both sides of the switch closely and fix it with three M3x6 FMO countersunk head screws
Networking
-
Method 1 (recommended)
Scan the QR-code on the manual or device to download Ruijie Cloud App. Follow the guide on App to set up and configure the network. -
Method 2
Connect the cable to the device port and access http://10.44.77.200 to perform configuration.
Port Information
- System status LED
- Reset button
- 10/100/1000 Base-T Ethernet port
- Copper port status LED
- 1000 Base-X SFP port
- SFP port status LED
- DC power port
Specifications
Specifications I RG-NBS3100-8GT2SFP
Standard| IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.32
Interface| 810/100/1000Mbps Ethernet ports
2100/1000 Mbps SFP ports
Switching Capacity| 20 Gbps
Power Consumption| The overall maximum output power is 8W.
Dimensions (W x D x H))| 260mm x 120mm x 43.6mm
Operating Environment| Temperature| 0 °C – 50 °C
Humidity| 10% – 90% RH, non-condensing
Storage Environment| Temperature| -40 °C – 70 °C
Humidity| 5% – 95% RH, non-condensing
CE Warming:
Operation of this equipment in a residential environment could cause radio
interference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>