Westinghouse WSHPTCBN1901 28 Inch Digital Ceramic Tower Heater Instruction Manual
- June 5, 2024
- Westinghouse
Table of Contents
WSHPTCBN1901 28 Inch Digital Ceramic Tower Heater
Instruction Manual
SAFETY INFORMATION
DANGER
DANGER – Immediate hazards which WILL result in severe personal injury or
death
WARNING
WARNING – Hazards or unsafe practices that COULD result in severe
personal injury or death
CAUTION
CAUTION – Hazards or unsafe practices that COULD result in minor personal
injury
WARNING
When using electrical appliances, basic safety precautions should always be
followed, including the following
IMPORTANT SAFEGUARDS
Read this instruction manual carefully before using the appliance and keep it
for future reference.
-
Use the appliance only for its intended purpose. Improper use may result in an electric shock, fire or serious injury and may void the warranty.
-
This appliance is for household use only. It is not suitable for commercial, industrial, or outdoor use.
-
This appliance is intended to be used in households and similar applications such as:
– staff kitchen areas in shops, offices, and other working environment;
– farmhouses;
– by customers in hotels, motels, and other residential type environments;
– bed and breakfast type environments. -
Do not use the appliance if it is damaged or not working properly.
-
This appliance can be used by children aged 8 years and above if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved. Cleaning, maintenance, or connecting the appliance to the power supply must not be done by children unless they are older than 8 years of age and supervised by an adult.
-
Children under the age of 3 must be constantly supervised if they are in the same vicinity as the appliance while it is in use or cooling down after use.
-
Keep the appliance and its power cord out of the reach of children when it is in operation.
-
Children should be supervised to ensure that they do not play with the appliance.
-
Never leave the appliance unattended while it is in operation.
-
Never connect this appliance to an external timer or remote control system.
-
Do not connect the appliance to a circuit that is regularly turned on and off by your electricity provider.
-
Never cover the heater or the air outlets/inlets or vents as this could cause a fire.
-
All covers are intended to prevent direct access to the heating elements and must be in place when using the appliance.
-
CAUTION: Parts of this appliance may become very hot and cause burns. Make sure that children or persons of reduced physical, sensory, or mental abilities are supervised and protected from accidental burns. In order to avoid any injury or burn, do not touch the heater directly. Use gloves or other means.
-
Position the appliance upright on a firm, level, heat-resistant surface near a power socket and out of reach of children.
-
Do not touch the hot surfaces. Only use the handles, knobs, or buttons.
-
Always unplug the appliance when unattended and after use.
Let it cool down before cleaning and storing. -
When using the appliance, allow adequate air space above and on all sides for air circulation.
-
Place the appliance at least 3 feet away from any combustible items, such as furniture, curtains, bedding, clothes, and papers.
-
Do not place this product on a carpet.
-
Do not place the appliance on or near open flames, an electric or gas burner, or a heated oven.
-
Do not use the appliance in places such as garages or warehouses where dangerous flammable products are stored such as paints, thinners, alcohol, etc.).
-
The appliance must not be placed below an electrical socket.
-
Do not use the heater in a bathroom, laundry, humid environment, or near a body of water such as a swimming pool. Maintain a distance of at least 5 feet away from water. Do not immerse the appliance in water or any other liquid or place it under running water (see CLEANING AND CARE).
-
Keep the heater clean. Do not allow objects to enter the air vents as this may cause an electric shock, fire, or damage.
-
The use of accessories or fittings other than the original parts supplied with this appliance may result in an injury, fire, or damage and will void the warranty.
-
Do not under any circumstances attempt to open, dismantle, or repair the appliance. For servicing and repairs, contact the retail outlet, the manufacturer, or an authorized service center.
-
Make sure no small piece of packaging, such as polystyrene, has been left on or fallen into the air inlets or outlets.
-
RISK OF SUFFOCATION! KEEP OUT OF REACH CHILDREN
-
– Keep all packaging materials out of the reach of babies and children.
POWER SUPPLY
-
Before first use, make sure the power voltage matches the information on the appliance rating label.
-
Only connect the appliance to an earthed wall socket.
-
To avoid a fire or electric shock, plug the unit directly into a 120V AC electrical outlet.
-
A short power cord (or detachable power cord) should be used to reduce the risk of becoming entangled in or tripping over the cord.
-
Always plug the appliance directly into the wall socket. Do not use multi-plugs, adapters, or extension cords.
-
Always fully unwind the power cord before using the appliance.
-
Do not twist the power cord.
-
Check there are no heavy items on the power cord, including carpets.
-
Make sure there is no pressure on the cord where it connects to the heater.
-
Never carry the heater by the power cord.
-
The cord should be arranged so that it does not touch hot surfaces, is not draped over a countertop or tabletop where it may be pulled on by children or tripped over unintentionally.
Never use the appliance with a damaged power cord or plug, or if the appliance has malfunctioned in any way. If the power cord, plug, or appliance is damaged, the appliance must be returned or replaced by the manufacturer, an authorized service agent or a similarly qualified person. -
Removing the power plug is the only way to separate the appliance completely from the power supply. Make sure the power plug is accessible.
-
When disconnecting the appliance from the power supply, pull the power plug instead of the power cord.
-
Keep the power cord away from hot surfaces. Do not plug in the power cord or operate the appliance with wet hands or when standing in water.
-
If the appliance falls into water, quickly turn it off at the wall socket and unplug it immediately. Make sure you are not standing on wet ground or have wet hands when touching the wall socket or plug.
-
Keep the appliance and power cord away from hotplates, hobs, and burners.
-
It is normal for the plug to get warm while the appliance is being used. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet in one orientation.
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, overheating and/or melting of the plug could occur. If the connection is loose, contact a qualified electrician.
Do not attempt to modify the plugin anyway.
RETAIN THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY
HOW TO USE
DESCRIPTION OF PARTS
1. Air inlet filter | 9. Base |
---|---|
2. POWER switch with red indicator light | 10. ON/OFF button |
3. Infrared sensor | 11. MODE button |
4. Light | 12. LIGHT button |
5. Air outlet | 13. TIMER button |
6. LED screen with temperature/hours display | 14. OSCILLATING button |
7. Control panel | 15. +/- button |
8. Tip-over sensor (on the bottom) |
NOTE: All images shown are for illustrative purposes only and may not be
an exact representation of the product model.
BEFORE FIRST USE
- Remove all packaging from the appliance.
- Unpack all parts and check for damage that may have occurred during transportation. If any parts are damaged or missing, do not use the appliance and return it to your retail outlet immediately.
OPERATING INSTRUCTIONS
NOTE:
-
It is normal when heaters are turned on for the first time, or if
they have not been used for some time, to emit some smell and
fumes. This will disappear after a short time (approx. 2 hours). -
It is also normal for the heater to emit small crackling sounds
when you first turn it on. -
This heater is designed for occasional or intermittent use and
should not be left on for prolonged periods of time.
CAUTION:
- The heater must always be placed in an upright position on a horizontal surface. Never turn the heater upside down when in use as it could cause irreparable damage.
- The heater does not have a device to control the room temperature. Do not use the heater in small rooms occupied by persons incapable of leaving the room on their own, unless constant supervision is provided.
SETTING UP THE HEATER
- Make sure the heater is placed upright on a firm, level, heat-resistant, and non-combustible floor surface. Do not place the heater on a carpet.
- Place the appliance at least 3 feet away from any combustible items, such as furniture, curtains, bedding, clothes, and papers, and 2 feet away from walls.
- Do not place the heater next to a shower, bath, swimming pool, or other body of water. Maintain a distance of at least 5 feet to water. Do not use the heater in wet or humid conditions.
- Before plugging in the heater, check the POWER switch (1) is in the off position O and the red power indicator light is off.
- Check the heater’s rating plate matches the mains socket voltage. Connect the heater to the mains power supply.
SETTING UP THE REMOTE CONTROL
Pull the plastic film from the battery compartment. The battery is now active,
and you can use the remote control.
Operating range of the remote control: Point the remote control at the heater
making sure there are no obstacles between the remote control and the heater’s
infrared sensor. The remote control can connect to the heater within 16 feet.
The range may vary depending on the brightness of the room.
CHANGING THE BATTERY
- Push the release button inwards and pull the battery casing out. Remove the old battery.
- Insert 1 x CR2025 3V battery into the battery casing ensuring you follow the polarity (+ and -) marked on the casing.
- Slide the battery casing back into the remote control until you hear it click firmly into place.
WARNING: Do not expose the infrared remote sensor to direct sunlight or other strong light, such as a fluorescent light.
NOTE: Make sure there are no obstacles between the remote control and the heater’s infrared sensor on the control panel.
USING THE HEATER
NOTE: The buttons for operating the heater on the heater control panel
and the remote control are the same except for the +/- button (15). When you
press the +/- button (15) on the heater control panel, it will scroll upwards
through the numbers, but you cannot scroll through the numbers in reverse
order. To scroll through the numbers in reverse, press the DOWN button (15) on
the remote control.
-
Press the POWER switch (2) to the on position I. The switch’s red indicator light will illuminate.
-
Press the ON/OFF button (10). The fan mode will start, and the LED screen will display the fan icon and the current room temperature i.e. 23°C.
-
Press the MODE button (11) repeatedly to select one of the following options:
• Fan
• Heater low – 1000W
• Heater high – 1500W -
To set the temperature, press the +/- buttons (15) to increase or decrease the temperature to your desired level. The temperature range is from 15°C to 40°C. When the set room temperature has been reached, the heater will turn off and the fan will turn on. The fan and heater will turn on and off to keep the room at the set level.
NOTE: The heater must be set to a temperature level that is at least a few degrees higher than the room temperature for the heating function to be activated. If the heater does not appear to be working, increase the temperature until the heating function turns on. -
To oscillate (swing) the heater through 45 degrees, press the OSCILLATING button (14). The oscillating icon displays when this function is on.
-
To stop the swing while the appliance is oscillating, wait until the airflow is in the desired position and press the OSCILLATING button (14).
-
The timer can be set to turn the fan or heater off in 1 to 12 hours. When the heater is running, press the TIMER button (13) repeatedly to set the hours. The timer icon and h icon display when this function is on. To turn the timer off, press the TIMER button (13) repeatedly until 00 appears.
NOTE: When you are not changing the time or temperature settings, the current room temperature will display. -
Press the LIGHT button (12) repeatedly to select one of the four available colors – blue, green, purple, white or off.
NOTE: The light can be turned on when the heater and the fan are not in use. -
To turn the heater off, press the ON/OFF button (10), the fan will run for 14 seconds to cool the heater and then the screen will turn off. Press the POWER switch (2) to the off position O.
-
Unplug the heater from the mains power supply when it is not in use.
NOTE:
-
Do not cover the heater or the air outlets/vents at any time while it is turned on. There is a risk of fire if the heater is covered.
-
For safety reasons, this heater is equipped with a tip-over sensor. This sensor automatically shuts down the heater if it is not in an upright position while in operation. To resume normal operation, check the heater is cool enough to handle, turn it upright and turn it on again.
-
The heater has a built-in overheating protection mechanism.
The safety mechanism will turn off the power if the heater overheats. Press the ON/OFF button (10) to turn the heater off and pull the mains plug from the socket. Wait for 10 minutes for the heater to cool down. Remove the cause of overheating i.e. excessive dust and turn on the heater. If for any reason the heater does not turn on, take it to your local service center for repair. -
The heater is designed to be used at temperatures above -20°C. If it is exposed to temperatures below this, allow it to warm up to this temperature before turning it on.
CLEANING AND CARE
- CAUTION: Always unplug the appliance from the mains power supply and let it cool down before cleaning.
- Wipe the outside of the heater and remote control with a soft, damp cloth and dry thoroughly. Do not let any liquid enter the heater or the remote control.
- Remove the air inlet filter by lifting up the tabs at the bottom of the filter and pulling it away from the appliance. Clean under running water. Dry thoroughly before reassembling the appliance.
CLEANING AND CARE
NOTE:
- Do not use solvents, chemical or abrasive cleaning agents, wire brushes, sharp objects or scouring pads to clean the product.
- Never immerse the appliance in water.
- Always clean the appliance before storing it for a long time.
- If you are not using the appliance for a long period, store the appliance in its original packaging or in a dust-free, dry environment.
TROUBLESHOOTING
Problem | Possible cause | Solution |
---|---|---|
The appliance will not turn on. | • The plug is loose or not connected. | |
• Check the fuse for the main electricity supply has not blown. | • Check the |
power cord and make sure it is firmly connected to the main socket.
• Replace the fuse. If it still not working, try plugging it into another
mains socket. If the problem persists, take the appliance to a nearby service
center.
Strong vibrations or noise.| • The appliance is not on a flat, stable surface.
• The appliance may be damaged.| • Move the heater to a solid and even floor
surface.
• If the heater is damaged, take the appliance to a nearby service center.
DISPOSAL
Proper disposal of this product.
This symbol indicates that this appliance may not be treated as household
waste. Instead, it should be taken to the appropriate collection point for
recycling electrical and electronic equipment.
Please use the return or collections services available in your community or
contact the retailer where you purchased this product.
INFORMATION AND SERVICE
If you have questions or concerns about your product, please visit our
website: www.westinghousehomeware.com,
or contact our overseas offices/agents.
In line with our policy of continuous product development, we reserve the
right to change the product, packaging, and documentation specifications
without prior notice.
Model: WSHPTCBN1901
Heater
Voltage: 120V, 60Hz
Power: Low – 1000W High – 1500W
Weight: 8.6lbs
Size in inches (W x D x H): 9.06 x 9.06 x 27.56
Remote control
Battery: CR2025 3V x 1 (included)
Operating range: 16 feet
and Westinghouse is trademarks of Westinghouse Electric Corporation, a USA
company. Used under license by Westinghouse Homeware (HK) Co. All Rights
Reserved.
WSHPTCBN1901 • 05/21
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>