300 Watt Marine Tweeter Speaker – 3.75” Aluminum Bullet-Complete Features/user Guide
- June 5, 2024
- PYRAMID
Table of Contents
300 Watt Marine Tweeter Speaker – 3.75” Aluminum Bullet
Specifications
- PRODUCT DIMENSIONS: 10.8 x 6.7 x 3.3 inches
- DEPTH (INCHES): 1 inches
- WEIGHT: 1.24 Kilograms
- SPEAKER TYPE : Woofer
- BRAND: Pyramid
- MOUNTING TYPE: Floor Standing
Introduction
Pyramid’s speakers have a 3.75″ aluminum bullet horn with a 1″ titanium dome tweeter speaker that features enhanced Ferrofluid and 2k-25kHz frequency response, making it ideal for use in a boat or other marine vehicle’s sound system or woofer enclosure. Because of its 20-ounce magnet construction, this bullet horn super tweeter speaker can handle up to 300 watts of peak output. All of it is encased in a swivel enclosure made of heavy-grade aluminum. The 4-ohm impedance of this maritime speaker compensates for the undersized wire seen in many modern marine vehicles. It eventually lowers distortion, allowing you to experience a crisp, clear sound. Pyramid designed this set with a 1″ audio tweeter and an aluminum chassis, which is customary for most marine stereo systems. Pyramid designed this set with a 1″ audio tweeter and an aluminum chassis, which is customary for most marine stereo systems. The strong foundation is provided by the heavy-duty housing and structure.
The 4-ohm impedance of this maritime speaker compensates for the undersized wire seen in many modern marine vehicles. It eventually lowers distortion, allowing you to experience a crisp, clear sound.
What’s in the box?
1 Pyramid Branded Product
How to Install
- These pair of speaker are very easy to install.
- There are two connector slots at the back of the speakers.
- Connect the wires of your audio system with the speakers.
- Turn them on.
- Your speakers will be played.
Frequently Asked Questions
-
What sort of cable connector is recommended for these speakers?
I have a set of floor-standing speakers with 14g wire plugged directly into them. You can use whatever connector you choose. These little speakers are a huge improvement, although I’ve turned them down a notch because they sometimes get a touch harsh. -
TW28 is listed on other websites as having a resistance of 4 ohms. 4-8 ohms is written on the back of the TW28. Is it okay to connect 8ohm speaker terminals to TW28 terminals with speaker wires?
At low volumes, you can utilize 4-ohm speakers with your AV receiver or current power amp without any problems. However, you must be careful not to overdrive your receiver or amplifier by transmitting more power to your speakers than the receiver is capable of continuously producing. You must match the impedance of the receiver/amp and your speakers if you plan to use the power amp/AV receiver at high volumes for an extended period of time. You risk destroying your receiver or amplifier if you don’t. -
Are they sold in pairs?
Yes, these come in pairs… they’re really excellent for the money… a little tinny at first… I use them as a backup system, not as my primary listening system. -
Are they made of aluminum?
Although the silver tweeter face is made of metal, the black spherical housing on the sides, back, and pedestal is made entirely of plastic. So far, there have been no issues. -
I’d like to pair these with a set of speakers that have a tweeter with a frequency range that’s almost identical. Will there be any value to me if I do?
Even though my Infinity speakers had separate tweeters built in, mounting mine on top of my front speakers of my Infinity speaker 7.1 system improved the sound dramatically with high frequencies. -
Is it possible to hear vocals through these?
Yes, these speakers can pick up vocals. However, the volume is really loud. These speakers are ideal for adding a high-end boost to a system. I have primary speakers with a genuine bass sound, and these tweeters perfectly balance that. They can also handle a lot of power.