Pyramid PVCT150U Step Up and Down Converter Instruction Manual
- October 27, 2023
- PYRAMID
Table of Contents
Pyramid PVCT150U Step Up and Down Converter
Specifications
- DIMENSIONS: 6” x 4.7” x 4.0” -inches
- WEIGHT: 97 pounds
- POWER OUTPUT: 50 Watt MAX (PVTC150U)
- STEP UP: 120V to 240V
- STEP DOWN : 240V to 120V
- RECOMMENDED WIRE CABLE SIZE: 18 Gauge (AWG)
- FUSE PROTECTION: 0A/250V(PVTC150U)
- SELECTABLE VOLTAGE: 110V/200V/220V/240V
- USB POWER OUTPUT: 5V/2A
- CONSTRUCTION MATERIAL: Engineered Metal Alloy Housing
- POWER CABLE LENGTH: 6’ ft.
- POWER SUPPLY: 120V/240V
Introduction
For both residential and business use, the step up/down voltage converter by Pyramid provides a secure, affordable, and simple method of converting voltages from 110-120 volts up to 220-240 volts or from 220-240 volts down to 110-120 volts.
You can utilize the right voltage based on the electronic demand thanks to the four selectable input voltages 110V/120V/220V/240V. You can use your electronics and appliances anywhere in the world thanks to this voltage transformer.
CONNECTIONS
Caution: Make all other connections before you connect the power supply standard AC power.
- Power ON/OFF: Set the power supply’s POWER switch to ON or OFF
- Output 110V: Standard Power Output US Outlet
- Output 220V: Universal Power Output Outlet
- PW: Power Red LED Indicator
- FULL: Charge Green LED Indicator
- USB Charge (5V/2A): USB Charge Works with All of Today’s Latest Devices
- Fuse Protected with Auto-Reset
- AC Power Supply Cable AC 110V-240V, 50/60Hz
- Input Voltage Selector: Four Selectable Input Voltages: 110V/200V/220V/240V
OPERATION
To use the power supply after you connect the device to it, set POWER to turn it on with the red led light illuminated. If the power supply’s POWER switch does not light, check all connections and confirm the wall AC outlet has power.
If the outlet has power, set POWER to OFF, reduce the load (by using a device that does not require more than 4 Amps), then set POWER to ON. Your power supply’s overload protection circuit automatically shuts down the power supply when overload and resets by turning POWER to OFF.
CAUTION: Place your power supply in a well-ventilated open and cool area. Do not block the openings at the fan suction on the sides and the discharge openings on the bottom.
CAUTION: To reduce the risk of energy hazard, be careful not to short the output terminal during operation. Remove the output connections after use.
CAUTION: Your power supply might cause TV or radio interference even when it is operating properly. To determine whether your power supply is causing the interference, turn off your power supply. If the interference goes away, your power supply is causing it.
Try to eliminate the interference by:
- Moving your power supply away from the receiver.
- Connecting your power supply to an outlet that is on a different electrical circuit from the receiver.
- Contacting a qualified service technician for help.
Features
- Power Voltage Converter
- Step-Up / Step-Down Transformer
- Universal AC Power Supply Conversion
- Rear Panel Voltage Selector
- Simple Electric Plug-in Design
- Built-in Fuse Protection
- USB Device Charge Port
- Includes European EU Power Adapter Plug
- Rugged & Durable Chassis Housing
- Power ON / OFF Switch
- LED Indicator Lights
- For Home, Office and Commercial Applications
What’s in the Box
- Voltage Converter Transformer
- Europe (EU) Power Adapter
- (2) Spare Fuses
FREQUENTLY ASKED QUESTIONS
Do I need a step-up or step down voltage converter?****
If you’re going somewhere with a higher power standard than what your appliances use, you’ll need a step-down voltage converter. On the other hand, bringing 220-110 volt equipment to the U.S. or Canada necessitates the use of a step-up voltage converter that can raise 110-120 volts to 220-240 volts.
What does a step down converter do?****
A step down converter, sometimes referred to as a buck converter, reduces voltage from high to low, typically converting AC current to DC current. No matter how the connected devices or the electrical load fluctuate, a voltage regulator keeps the output voltage constant for the circuit.
What is a step-up and down converter?****
By raising the voltage, a step-up voltage converter enables the operation of 220/240 volt equipment with a 110/120 volt electrical outlet. By lowering the voltage, a step-down voltage converter enables the operation of a 110/120 volt device with a 220/240 volt electrical outlet.
Can you step down a 220V to 110V without?****
Select a transformer with a higher wattage rating than your devices. For instance, the PlayStation 3 consumes 380 Watts, requiring the 500 watt step down converter. Do you have a motor for your appliance? If a motor is present, you should choose as a buffer a step down rating that is approximately 25% higher than your motor.
What happens if you don’t use a voltage converter?****
You’re still extremely likely to blow a fuse or, worse yet, take out the electricity for half the hotel! By doing this, your gadget could possibly catch fire. One more continues, “I personally don’t advise a travel electric converter. Too many devices have been damaged by faulty power voltage converters, in my opinion.
Are Step Up Converters safe?****
Electricity can be converted using step-up/down converters from 220V/240V AC to 110V/120V AC (step down) or from 110V/120V AC to 220V/240V AC (Step-up). These transformers include built-in fuses and are grounded, which protects users from electrical shock and injury.
Does a step-down transformer consume electricity?****
It turns out that regardless of whether they are linked to a device or not, these transformers use energy whenever they are plugged into a wall. When they run a device, they also waste energy. If you’ve ever experienced one and it was warm, it was probably lost energy that was converted to heat.
Can you turn a 110v plug into a 220?****
It is possible to change 110v outlets to 220v. This requires extensive rewiring as well as a building code assessment. An electrician from U.S. Electric can assist in this situation.
How many watts does a step down transformer need?****
Transformers can consume up to 60–70 Watt while they are idle. When in the idle state, they consume 5–10% of the rated power.
How big of a power converter do I need?****
To convert securely, make sure to choose a converter with a wattage rating that is two to three times higher than the equipment you intend to use. Get a converter or transformer that is 1200W, for instance, if your appliance or device is 600W. When in doubt, invest in a considerably greater wattage converter.
How can we step down voltage without transformer?****
Without a transformer, the only method to reduce voltage is to add resistance to the circuit, either by lengthening the feeder, which would increase voltage drop, or by incorporating a resistor into the system.
What appliances need a voltage converter?****
A 50-watt converter is required for small electronics, razors, and non-heating appliances. Converters up to 2000 watts are required for high-powered electrical heating appliances such dryers, irons, coffee makers, and other equipment.
How efficient are step-down transformers?****
Step-down transformers have an efficiency of up to 97%, allowing them to deliver the desired output. With little power loss, we can easily get the desired output voltage. They are more dependable and less expensive. They are able to deliver both low voltages and strong currents.
Are voltage converters safe?****
With its voltage regulator, which stabilizes the conversion of foreign energy when used in nations with fluctuating voltage, these voltage converters perform excellently and can guarantee the safety of your favorite products. When you are unsure of a region’s power source, this is a fairly safe bet.
Do I really need a voltage converter?****
All you need is an adaptor if the voltage is EXACTLY the same as your electronics’ voltage. You will require a converter if the voltage is DIFFERENT from what your electronics are accustomed to.