PYRAMID V100 Mandello Handguards Instruction Manual
- June 2, 2024
- PYRAMID
Table of Contents
PYRAMID V100 Mandello Handguards
Product Information
Specifications:
- Product Name: Moto Guzzi V100 Mandello Handguards
- Model Number: 38870
- Kit Includes:
- 2X C30203 Handguards (pair)
- 2X CFK38870 Brackets (pair)
- 2X CBOLM60018 M6X50mm Countersunk Bolt
- 2X CWASM60005 M6 Countersunk Washer
- 2X CWASM60001 M6 Washer
- 4X CBOLM50007 M5X16mm Bolt
- 4X CNUTM50002 M5 Nyloc Nut
- 4X CSPAM50003 M5 Collar
Product Usage Instructions
Installation Steps:
- Remove the bar ends from both sides of the handlebars.
- Remove both mirrors from the bike. Use two spanners of the same size for easier removal and refitting of the mirrors.
- Loosely attach both brackets (left and right sides respectively) on the mirror mounting points. Refer to Fig 1 and 2 for correct bracket positioning.
- Loosely attach the handguards to the bar ends using the M6 fittings supplied. See Fig 3 for reference.
- Loosely attach the brackets to the handguards using the M5 fittings supplied. Refer to Fig 4.
- Tighten all fixing points and adjust the mirror mountings if necessary by adjusting the two nuts on the mirror mounting point.
- Periodically check all fixings for secure attachment.
FAQ:
Q: Where can I direct product-related questions or feedback?
A: For any questions or feedback regarding the Moto Guzzi V100 Mandello
Handguards, please contact sales@pyramid-plastics.co.uk or call +44 (0)1427 677990. You can also visit our
website at www.pyramidplastics.co.uk for
more information.
Follow us on social media and feel free to leave us a review!
38870 Moto Guzzi VlOO Mandello Handguards Fitting Instructions
Kit Includes
INSTRUCTION
Remove the bar ends from both sides of the handlebars.
Remove both mirrors from the bike.
Note: two spanners of the same size will aid the removal and refitting of the mirrors.
Loosely attach both brackets (left+ right sides respectively) on the mirror
mounting points.
(See Fig 1 + 2 to see how the brackets should be positioned).
Loosely attach the handguards to the bar ends using the M6 fittings supplied
(see Fig 3).
Loosely attach the brackets to the handguards using the MS fittings supplied
(see Fig 4).
Now tighten all the fixing points and adjust the mirror mountings if need be –
this can be achieved by adjusting the two nuts on the mounting point of the
mirror.
Check all fixings periodically.
Any questions?
sales@pyramid-plastics.co.uk
+44 (0)1427 6 77990
www.pyramid-plastics.co.uk
Follow us on social media and feel tree lo leave us a review!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>