BONFIN F18 Wireless Headset User Manual
- June 5, 2024
- BONFIN
Table of Contents
USER MANUAL
F18 Wireless Headset
DIAGRAM
PAIRING
Step 1: Take out the headphones from the charging case;
Step 2: Turn on the setting of your phone;
Step 3: Select “F18” on the retrieved device to connect.
STARTUP & SHUTDOWN
Note:
The earbuds will reconnect to the previously connected device by priority. If
you want to connect other smart devices, please disconnect the previously
connected device.
POWER ON
POWER OFF
MUSIC
INCOMING CALL
ACTIVATE SiRi
Three-hit entry on standby headset-Siri
ANC MODE
In dual mode, press and hold the left or right earbud for 2 seconds to turn on or off the ANC mode.
CHARGING
BASIC PARAMETERS
Product model: F18
Headphones Specifics
Product Size: 31.04×21×23.9mm / 1.22×0.82×0.94in
Net of headphones: 6g / 0.01lb
Wireless Version: V5.2
ANC performance: 35dB
Waterproof level: IPX7
Charging time: about 1.5 hours
Single using time: about 8 hours
Total using time: about 40 hours
Standby time: about 100 hours
Communication distance: more than 10 meters
Battery capacity: 50mah (single earphone)
Battery type: lithium ion polymer battery
Charging Case Specifics
Product Size: 60×44.6×25.17mm / 2.36×1.75×0.99in
Net of charging case: 45g / 0.1lb
Charging Port: TYPE-C
Charging Time: about 2.5 hours
Battery capacity: 400mAh
Battery type: lithium ion polymer battery
PACKING LIST
CORRECT DISPOSAL OF THIS PRODUCT
When you see this marking or literal instruction shown on the product, it indicates that the product should not be disposed with other household wastes at the end of its service life.To prevent possible harm to the environment or human health from uncontrolled waste disposal, please dispose of this product strictly according to the local waste disposal guidelines and separately from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household user should contact either the retailer where they purchased this
product or their local government office, for details of where and how they
can take this item for environmentally safe recycling; business users should
contact their supplier and check the terms and conditions of the purchase.
Please note that this product should not be mixed with other commercial wastes
for disposal.
FCC STATEMENT
All changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC rules, operation is subject to the following two conditions: (1) this device may not cause harmful interference and. (2) this device must accept any interference,including interference that may cause undesired operation. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forthfor an uncontrolled environment.
FCC CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
WARRANTY AND CUSTOMER SERVICE
We provide friendly 24-Hour after-sales customer service and a professional team at any time and also provide 18 months warranty. There are two ways to contact us:
- Our customer service email: F18_Service@hotmail.com
- Enter our store that below the button “Add to cart” and find the button “Ask a question”, which can also contact us directly.
We sincerely hope you can enjoy our products all the time!