PYRAMID V100 Mandello S Engine Cover Instruction Manual

: May 15, 2024
: PYRAMID

Table of Contents

PYRAMID V100 Mandello S Engine Cover
Product Information
Product Usage Instructions
Kit Includes
Assembly Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PYRAMID V100 Mandello S Engine Cover

Product Information

Specifications

Product: Engine Guard Kit
Model: V100 Mandello
Manufacturer: Pyramid Moto

Product Usage Instructions

Assembly Instructions

Begin by cleaning the engine area thoroughly to ensure all mounting areas are free from debris.
Identify the color of the Engine Guard purchased (38406M or 38406S) to determine the color of the M6 spacers.
Use the provided bolts, washers, and spacers for installation.
Apply threadlock to the bolts for added security (threadlock not included).
Check and tighten all fixings periodically.

Installation Steps

Refer to FIG.1 for the general overview of the assembly components.
Follow the steps outlined in the manual for proper placement and attachment of the Engine Guard.
Refer to FIG.2 for detailed instructions on the positioning of specific components
If necessary, refer to FIG.3 for guidance on removing the horn during installation.

FAQ

Q: Is threadlock included in the kit?
A: No, threadlock is not included in the kit. It is recommended to use threadlock on the supplied bolts for added security.
Q: How often should I check and tighten the fixings?
A: It is advisable to check and tighten all fixings periodically to ensure the Engine Guard remains securely in place.
Contact us at sales@pyramidmoto.co.uk or call +44 (0)1427 677990 for further assistance. Visit our website www.pyramidmoto.co.uk for more information and updates.

38406M S Moto Guzzi Vl 00 Mandello Engine Guard 2022> fitting Instructions

Kit Includes

PYRAMID-V100-Mandello-S-Engine-Cover-IMAGE-6

Please note : The colour of the M6 spacer (item 4) will be determined by the colour of the Engine Guard (Item 1) purchased. Black M6 spacers will be included with 38406M and silver M6 spacers will be included with 384065.

Assembly Instructions

Before commencing the installation, it is advisable to fully clean the engine area to ensure that all mounting areas are free from debris.

Begin by removing the lower OEM M6 bolts (x4) from the engine casing. You may wish to disassemble the horn from its mounting position. This will help with the tightening of the upper right-hand bolt. Please take care when lowering the horn lo avoid any unwanted damage and refer to ‘FIG. 3 ‘.
Before fitting the Engine Guard [Item 1 ), please refer to ‘FIG. 2’ to understand the fixing arrangement. Use 1 x M6 bolt (Item 2), 1 x M6 spacer (Item 4) and 2 x M6 washers (Item 3) to initially locate the Engine Guard (Item 1) on the VlOO Mandel lo. Please ensure this bolt has only been threaded a few turns.
Repeat the previous step for the remaining mounting locations. Once all fixings have been partially threaded, proceed to fully tighten each bolt until sufficient resistance is felt. Please ensure the Engine Guard remains in parallel with the engine whilst fully tightening. This can be achieved by evenly threading the bolts until completion.
Installation of the Moto Guzzi Vl 00 Mandella Engine Guard is now complete.

Please Note : We recommend using thread lock on the bolts supplied in this kit. Thread lock is not included. We advise that all fixings are checked periodically.

‘FIG. 3’ shows the location of the horn, should it need to be removed during installation.