PYRAMID CB750 Honda Hornet Handguards Instruction Manual
- June 1, 2024
- PYRAMID
Table of Contents
PYRAMID CB750 Honda Hornet Handguards
Product Information
Specifications:
- Product Name: Honda CB750 Hornet Handguards
- Model Number : 30192
- Kit Includes:
- 2X Handguards (pair)
- 2X Brackets (pair)
- 2X Bar End (pair)
- 2X M6X100mm Countersunk Bolt
- 2X M6 Countersunk Washer
- 2X M6 Washer
- 2X M6 Spacer
- 4X M5X16mm Bolt
- 4X M5 Nyloc Nut
- 4X M5 Collar
Product Usage Instructions
- Remove the plastic bar ends from both sides of the handlebars.
- Remove both mirrors.
- Loosely attach the brackets underneath the mirror mounting points.
- Loosely attach the handguards and bar ends in sequence.
- Loosely attach the brackets to the handguards using the M5 fittings supplied.
- Now tighten all of the fixing points and adjust the mirrors if needed. This can be achieved by adjusting the two nuts on the mounting point of the mirror.
- Check fixings periodically.
FAQ:
- Q: How do I adjust the mirrors after installing the handguards?
- A : To adjust the mirrors, tighten all fixing points first, then adjust the two nuts on the mirror mounting points until the mirrors are positioned correctly.
- Q: Can I use these handguards on other motorcycle models?
- A : These handguards are specifically designed for Honda CB750 Hornet. Compatibility with other models may vary.
- Q: How often should I check the fixings?
- A : It is recommended to check the fixings periodically, especially after riding on rough terrain or if you notice any loosening of the handguards.
- Contact us at: sales@pyramid-plastics.co.uk
- +44 (0)1427 677990
- Website: www.pyramid-plastics.co.uk
Kit Includes:
- Remove the plastic bar ends from both sides of the handlebars.
- Remove both mirrors.
- Loosely attach the brackets underneath the mirror mounting points (see Fig 1 & 2).
- Loosely attach the handguards and bar ends (see Fig 3 for sequence).
- Loosely attach the brackets to the handguards using the M5 fittings supplied (see Fig 4).
- Now tighten all of the fixing points and adjust the mirrors if needed – this can be achieved by adjusting the two nuts on the mounting point of the mirror.
- Check fixings periodically.
Any questions?
- sales@pyramid-plastics.co.uk
- +44 (0)1427 677990
- www.pyramid-plastics.co.uk
Follow us on social media and feel free to leave us a review!
References
Read User Manual Online (PDF format)
Loading......