WILDLAND FY-01 LED Lantern Fang Yuan Instruction Manual
- June 1, 2024
- WILDLAND
Table of Contents
WILDLAND FY-01 LED Lantern Fang Yuan Instruction Manual
Lighting switch
Long press the knob above 1S to turn on the lamp.
The default mode is the lowest lumen of warm light (2200K).
Quick press
Quick press for the lowest lumen of cool light(6500K).
Clockwise rotating for more brightness from 5% to 100%.
Anticlockwise rotating for less brightness from 100% to 5%.
It takes about 3~4 laps of rotating for the lamp to reach maxim brightness.
Attention: Long press the knob is for power ON/OFF. Quick press for changing the function.
The lamp will be off automatically if the voltage of battery is lower than 3V, which means that it needed to be recharged. Please turn off the light while recharging.
Bluetooth speaker
Speaker name: Fang Yuan
Long press the knob 1S to turn on the speaker.
Quick press to Pause/Play
Turn the knob clockwise to increase the volume.
Tum the knob anticlockwise to decrease the volume.
When playing, the blue indicator flash slowly.
When paused, it is always on, and when the Bluetooth connection is
disconnected, it flash quickly.
No bluetooth device connected, the speaker will automatically off after 5
minutes.
When the voltage is too low, there will be a prompt sound, and the sound will be automatically off at the same time.
USB
USB port: Type-c port support (5V3A) charging input.
When charging, the green indicator flash, and when fully charged, it is always
on.
Specifications:
Rated Power(W): 14.5W
Power range(W): 13-16W
Rated Voltage(V): 3.7V
CCT(K): 2200K/6500K
CRI(Ra ) : Ra≥80
Lumen(Lm): 1000lm
Charging Current: 5V/3A TYPE C
Battery: Li-on Battery
Capacity(mAh): 3.7V 5200 mAh
Charging Time(H) : >3H
Duration(H) : 5~100 H
Working Temp.(°C) : Charging 0°C~45°C
Storage Temp.(°C) : -20°C~60°C
Working Humidity(%): ≤95%
Storage Conditions : Dry and ventilated place
Net Weight(g ) : 1050g
Shell Material : Iron+silicon+PC+ABS+PP
IP grade : IPX4
Audio Specifications:
Speaker type : Full frequency
Quantity of Speaker: : 52mm x 1
Woofer Impedance : 4Ω
MPO : 3W x 1
Passive Radiator Spec./Quantity : 64x64mmx1
Channel : Mixed stereo
THD : < 0.3%
SIGNAL-NOISE RATIO : >85dB
Notes:
- Only for DC+5V adaptor.
- The rechargeable batteries may contain contaminants, so please take out the batteries before discarding and recycle and send them to government appointed recycle bin.
- Please do not expose it in the rain,
- To prevent it from battery damage as overall, please charge timely when power off.
- Please charge once per three months if not use for quite some time.
- To prevent it from water and dust contaminant, please cover the USB output interface with waterproof film when it not in use.
- AS it contains high energy lithium battery, in order to avoid accidents, please do not put it into fire.
- Please store in a dry and ventilated place.
Warranty card
- This product from the date of sale and warranty for one year.
- The company will provide you with high quality after-sales service.
- If the user due to damage caused by man-made factors, the company is required for a maintenance repair charge.
- Please keep this card, we will use this as warranty basis.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>