Trisa 1719.42 Hair Cutter Instruction Manual

June 12, 2024
Trisa

Trisa 1719.42 Hair Cutter

Trisa-1719.42-Hair-Cutter

Product Information

Battery: 600 mAh

Voltage: 3.7 V

Runtime: 90 minutes

Manufacturer: Trisa Electronics AG

Model: Art. 1719.42 CH

Distributors:

  • Trisa Electronics AG – Kantonsstrasse 121, CH-6234 Triengen – info@trisaelectronics.ch – +41 41 933 00 30
  • HKS Electronics Vertriebs GmbH – Graf von Stauffenbergstrasse 8, D-63150 Heusenstamm – HKS-GmbH@T-online.de – +49 (6104) 5920
  • SCD Handels GmbH – Unterhaus 33, A-2851 Krumbach – service@trisaelectronics.at – +43 (2647) 4304070

Website: www.trisaelectronics.ch

Product Usage Instructions

The product comes with the following accessories:

  • 4 guide combs (peignes-guides/pettini guida)

To use the product:

  1. Make sure the battery is fully charged.
  2. Select the desired guide comb according to your preferred hair length.
  3. Turn on the device by pressing the power button.
  4. Hold the device firmly and move it against the direction of hair growth for optimal results.
  5. For faster cutting, use the Turbo button (Touche Turbo/Tasto Turbo/Turbo key/Tecla Turbo).
  6. After use, clean the device and accessories properly and store them in a safe place.

For more detailed instructions and safety precautions, refer to the user manual provided with the product.

Welcome

Please read all the information provided in these instructions. Keep the instructions in a safe place and pass them on to further users. The appliance must only be used for the intended purpose according to these instructions. Observe the notes on safety regulations.

Instructions for use

Haircutter

  • IPX 5
    Waterproof

  • ~ 60 min
    Battery running time

  • 90 min
    Short battery charging time

  • 0,5 – 32,5 mm
    65 cutting lengths

Trisa-1719.42-Hair-Cutter-10

Appliance Description

Trisa-1719.42-Hair-Cutter-1

Charge battery

Only when the appliance is switched off.

  • Plugin
  • Charging:

Use

Preparation

  • Unplug
  • Select guide comb
  • Attach guide comb
  • Set the desired cutting length

Trisa-1719.42-Hair-Cutter-3

Cut

  • Turn on
  • as required

Switch off

  • Switch off
  • Shake hair out of appliance.
  • Cut against the direction of hair growth.
  • Cut slowly, starting with one of the longer cutting levels.
  • Blow hairs away from time to time.
  • Hold blade upwards.

Cleaning

Remove blade

  • Switch off
  • Remove guide comb
  • Press the blade firmly out

Trisa-1719.42-Hair-Cutter-7-

Cleaning

  • Remove hair strands
    Use only the brush provided.

  • Clean with a damp cloth and then allow to dry
    Do not use scourers or solvents.

  • Insert the blade

As required: Oil blade

Use only the special oil provided. Use it sparingly.

  • Oil blade
  • Switch on for a short time

Safety instructions

  • Children aged 8 years or over and persons with reduced physical, sensory or mental capabilities, lack of experience or knowledge may only use the appliance if they are supervised by a person who is responsible for their safety or if they have been shown how to use the appliance safely and they have understood the risks inherent in its use. Cleaning and maintenance tasks may not be carried out by children without supervision.

  • Children should not be allowed to play with the appliance. Keep the appliance out of reach of children aged under 8. Never leave the appliance un attended while in operation.

  • Keep packaging (e.g. plastic bags) away from children.

  • Never switch on damaged appliances – have repairs carried out /obtain replacement from the manufacturer, the manufacturer’s ser-vice point or from qualified experts. Never open the appliance yourself
    – risk of injury!

  • Never place the appliance on hot surfaces or near open flames. Do not store/expose the appliance to intense heat (from radiators, prolonged sunshine).

  • Do not use attachments not recommended/sold by the manufacturer.

  • The appliance is designed for household use and not for industrial operation. Do not operate the appliance outdoors.

  • No warranty for any damage can be accepted if the appliance is used for improper purpose, wrongly operated or unprofessionally repaired. In such a case, any warranty claim is void.

  • Never place fingers or objects into appliance openings.

  • If the comb / the blade is damaged the appliance must not be used.

  • Be careful when handling the sharp blades – you might injure yourself.

  •  Do not drink the oil supplied.

  •  Only use the supplied USB cable. Do not use the USB cable for other devices.

  •  Never immerse the power cable in water / other fluids. Danger of short-circuiting!

  •  For reasons of hygiene, only one person should use the device.

Technical data

  • Charging time 90 min
  • Battery charge 60 Min.
  • Battery capacity 600 mAh
  • Volts 3,7 V
  • Cable length 50 cm
  • Cutting length 0,5 – 32,5 mm
  • Operating/storage temperature 4,5 – 35 °C

Electric appliances are to be returned to a shop of sale or handed over to an official dump. No household waste. Must be disposed of in accordance with local regulations.
In accordance with the European guidelines for safety and EMC.
We reserve the right to make changes in design, equipment, technical data as well as errors.

Without charging cable, the device is suitable for use in bathrooms or showers

www.trisaelectronics.ch

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals