logitech Zone 900 Replaceable Earpad Covers User Guide
- June 5, 2024
- Logitech
Table of Contents
logitech Zone 900 Replaceable Earpad Covers
KNOW YOUR PRODUCT
WHAT’S IN THE BOX
- 1 pair (2 pcs) of replaceable earpad covers
- 1 pair (2 pcs) of foam cushions
- 1 pair (2 pcs) of adhesive tapes
REPLACING EARPAD COVERS
- Take the existing earpad cover off by carefully pinching the cover.
- Remove the earpad cover slowly until it is completely off. Make sure not to pinch the foam cushion which can be damaged easily.
- If foam cushion is damaged, please follow the steps below
- Peel the foam cushion off and replace with a new one.
- Place the tape on the top of the ear cup first.
- Then attach the foam cushion to the tape.
- Grasp the new earpad cover, making sure that the small holes on the side align with the top and bottom of the ear cup. It should align with the USB C port at the bottom.
- Starting from the top, slot the edge of the earpad cover inside the gap. Put the edge of the cover into the gap around the earcan.
- After completing, gently pat the earcup several times to push the air out.
DIMENSIONS
EARPAD COVERS
Height x Width x Depth: 70.7 mm x 70.7 mm x 16.4 mm
www.logitech.com/support/zone900
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>