camry CR 1188 Retro Radio User Manual

camry CR 1188 Retro Radio User Manual

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different, if the device is used for commercial purpose.

1. Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
3. The applicable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
4. Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
5. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over
6. years of age and these activities are carried out under supervision.
7. After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
8. Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
9. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
10. Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
11. Never use the product close to combustibles.
12. Do not let cord hang over edge of counter or touch hot surfaces.
13. Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
14. In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
15. Avoid getting the device wet.
16. The device may only be wiped with a dry cloth. Do not use water or cleaning fluids.
17. The device should be kept in a dry room.

LOCATION OF CONTROLS.

Front:

1. Volume control knob
2. Tuning control knob
3. AM function button
4. FM function button

Back:

5. Power Button
6. FM Antenna
7. Power Cord
8. USB ON/OFF button
9. Backward, Skip button
10. Play / Pause button
11. Forward Skip Button
12. Indicator Light
13. USB port
14. Indicator Light

Operating instructions:

Turning on:

1. Find the ON / OFF switch (6) located at the back of the device.
2. To turn on the device flip the switch into the ON position marked with the „I” symbol.
3. To turn off the device flip the switch into the OFF position marked with the „O” symbol.

Radio:

1. Press the Radio / BT button (5) to switch between the Radio and Bluetooth function.
2. Press the FM (4) or AM (3) button to switch to the desired band.
3. To change the frequency, rotate the Tuning knob (2) left or right to find the desired wavelength.
4.  To change the volume level rotate the Volume control knob (1)

USB:

1. To use the USB function please find the USB ON / OFF button (9) at the back of the device.
2. To turn on the USB function press the ON / OFF button (9).
3. The USB function will now work. The FM / AM / Bluetooth options are now disabled until the USB function is turned off.
4. To control the USB function use the Backward (10) Play, Pause (11), and Forward (13) buttons to select and play tracks saved on the USB device.

ATTENTION: The device will only work with devices up to 32 GB and formated in FAT32 file format. The device will play only Mp3 files.

Bluetooth:

1. To use the Bluetooth function please press the Radio / BT switch (6) and press it.
2. The switch will change color to blue.
3. The button will start blinking. This indicates that the device is in pairing mode.
4. Find on your media device the radio. It will show up on the list as „CR1188″.
5. Pair the Radio and the media device.
6. The button will stop blinking and will shine continuously blue.
7. You can control the volume with the Volume control knob (1).
8. The rest of the functions are controlled from the multimedia device.

Technical Data:
Input voltage: 230V~50Hz
Output Power: 2 x 5W
Bluetooth – standard version 5.0 FM: 87,5-108 MHz AM: 530-1600 kHz

Hereby, Adler Sp. z o.o., Ordona 2a, 01-237 Warsaw, Poland declares that the radio equipment type radio CR1188 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: https://adler.com.pl/dane/CE/cr_1188.pdf

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins.
Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.

References

• AdlerEurope

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>