nedis WIFIACMB1WT7 Wi-Fi Smart Air Conditioner User Guide

June 5, 2024
nedis

WIFIACMB1WT7 Wi-Fi Smart Air
Conditioner User Guide

ned.is/wifiacmb1wt7

nedis WIFIACMB1WT7 Wi-Fi Smart Air Conditioner - fig 1nedis WIFIACMB1WT7 Wi-Fi Smart Air Conditioner - fig
2nedis WIFIACMB1WT7 Wi-Fi Smart Air
Conditioner - fig 3

For more information see the extended manual online:
ned.is/wifiacmb1wt7

Intended use

The Nedis WIFIACMBl WT7 is a local air conditioner used for cooling and dehumidifying rooms.
The product is exclusively intended as a local air conditioner for domestic, and indoor use.
The product is not intended for professional use.
This product can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
This product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions,  such as shops, offices other similar working environments, farmhouses, by clients in hotels, motels, and other residential type environments and/or in bed and breakfast type environments.
Any modification of the product may have consequences for safety, warranty, and proper functioning.

Specifications

Product Wi-Fi Smart Air Conditioner
Article number WIFIACMBl WT7
Dimensions (I x w x h) 377 x 678 x 347 mm
Weight 21 kg
Input voltage 220 – 240 VAC ; 50 / 60 Hz
Required power 792W
Energy class A
Energy efficiency ratio (EER) 2.61
Noise level <65 dB
Cooling capacity 7000BTU
Room size capacity* 10-15m
Air circulation 300 m/h
Dehumidification 17I/day
Refrigerant R290/ 130g
Power plug Schuko CEE 7/7

The performance of the air conditioner is subjected to many factors like floor space, ceiling height, level of isolation, and the number of windows. The data mentioned is based on a  space with low heat loads.

Main parts (image A )

1. Control panel 10. Filter screen
2. Swing louvers 11. Continuous drainage outlet
3. Handle 12. Air outlet
4. Exhaust nozzle 13. Manual drainage outlet
5. Exhaust hose 14. Power cable
6. Window kit 15. Exhaust hose connector
7. Window kit fasteners 16. Remote control
8. Screw 17. Exhaust nozzle screw
9. Filter frame

Control panel and remote control (Image B)

1. Mode indicators 6. Power button / Wi-Fi indicator LED
2. Timer button 7. Fan mode button
3. Up button 8. Fan speed button
4. Down button 9. Sleep mode button
5. Temperature indicator 10. Power button

Safety instructions

WARNING

Contains one or more (extremely/highly) flammable components.
Contain, one or more (extremely/highly) flammable components.

  • Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
  • Only use the product as described in this manual.
  • This product can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the product in a safe way and understand the hazards involved. Children shall not play with the product.  Cleaning and user maintenance shall not be done by children without supervision.
  • Close supervision is necessary when the product is used by or near children, animals, or infirm persons. Do not allow children to play with it or touch it.
  • Keep the product out of reach from children.
  • Do not use a damaged or defective product, but return it for repair or replacement.
  • Do not expose the product to water, rain, moisture or high humidity.
  • If the product is immersed in water, do not touch the product or the water.
  • Shut off the main power grid and carefully remove the plug from the power outlet.
  • After the product has been immersed or covered in water or other liquids, do not use the product again.
  • Keep the product away from heat sources. Do not place the product on hot surfaces or near open flames.
  • Do not use the product near explosive or flammable materials.
  • Do not insert any objects into the product.
  • Do not obstruct or cover the product’s air inlet or outlet grid.
  • The appliance shall be installed in accordance with national wiring.
  • Always disconnect the product from the power outlet when cleaning or moving the product.
  • Do not pull the power cable to move the product.
  • Unplug the product from the power source and other equipment if problems occur.
  • Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
  • Switch off the main power switch before unplugging the power cord .
  • Do not use the product when the cord or plug is damaged.
  • Make sure that the electrical supply in your area matches a voltage of 220 -240 VAC and a frequency of 50 Hz.
  • Connect to a grounded socket only .
  • If necessary, use an earthed extension cable of a suitable diameter.
  • Fully extend the power cord and make sure the power cord does not contact the product.
  • When using an extension cord, use one which is as short as possible and fully extended.
  • Do not use external timers or remote control systems to switch the product on or off.
  • Ensure people do not trip over the cord.
  • Make sure that the power cable cannot become entangled and does not hang over the edge of a worktop.
  • Do not leave the product unattended when switched on.
  • R290 is a refrigerant gas that complies with the European directives on the environment.
  • Be aware that refrigerants can be odorless.
  • Place the product in an area without any continuous sources of ignition (for example open flames, gas or electrical appliances in operation).
  • Only install, operate and store the product in a room with a floor area above 7 m.
  • Only store the product in a well-ventilated area.
  • Store the product in such a way as to prevent mechanical failure.
  • When the product is installed, operated, or stored in a non-ventilated area, make sure the room is designed to prevent the accumulation of refrigerant leaks resulting in a risk of fire or explosion due to ignition of the refrigerant caused by electric heaters, stoves, or other sources of ignition.
  • Only persons with a currently valid certificate from an industry­ accredited assessment authority, which authorizes their competence to handle refrigerants safely in accordance with an industry-recognized assessment specification, can work on or break into a refrigerant circuit.
  • Servicing can only be performed as recommended by the equipment manufacturer. Maintenance and repair requiring the assistance of other skilled personnel can only be carried out under the supervision of a person competent in the use of flammable refrigerants.
  • When defrosting and cleaning the product, do not use any means other than those recommended by the manufacturing company.
  • Do not puncture or heat any part of the refrigerant circuit.
  • This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.

Installing the product

Place the product on a stable and flat surface.
Only move the product in an upright position.
Leave a minimum of 0.5 m space around the air inlet and outlet to allow a good circulation of airflow.
If the product has been tilted, allow it to stand upright for 2 hours before plugging it in.
Only install, operate and store the product in a room with a floor area above 7m.
Keep the product at a distance from flammable objects such as furniture, curtains, and similar.
Do not block ventilation openings and make sure that there is enough space around the product.

Assembling the exhaust (image C)

Only use the provided exhaust hose.
Do not block the exhaust hose, this may cause overheating.

  1. Assemble the exhaust hose A5, the exhaust nozzle A4 and the exhaust hose connector A15.

  2. Slide A15 over the air outlet A12.

  3. Extend A5 up to 1500 mm.
    Do not twist the exhaust hose.
    Ensure that the exhaust hose does not kink.

  4. Assemble the window kit A6 with the fasteners A7.

  5. Install A6 in the window opening.

  6. Tighten A7.

  7. Snap A4 into A6 and fasten with the exhaust nozzle screw A17.

Assembling the continuous drainage (optional)

1. Open the continuous drainage outlet A13.
2. Connect 13 to a water container or drainage system (not included).

Installing the Nedis Smartlife app

  1. Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
  2. Open the Nedis Smartlife app on your phone.
  3. Create an account with your mobile phone number or your e-mail address and tap Continue.
  4. You will receive a verification code on your mobile phone or e-mail address.
  5. Enter the received verification code.
  6. Create a password and tap Done.
  7. Tap Add Home to create a Smartlife Home.
  8. Set your location, choose the rooms you want to connect with, and tap Done.

Adding the product to the Smartlife app (image D)

  1. Switch on the product.

  2. Tap + in the Nedis Smartlife app.

  3. Select the device type you want to add from the list.

  4. Confirm the Wi-Fi indicator LED B6 is blinking fast. Or reset the product during standby mode: Press and hold the fan speed button B8 for 5 seconds until the product emits a tone and B6 starts blinking.

  5. Follow the instructions in the Nedis Smartlife app.
    Make sure you connect the product to a 2.4 GHz Wi-Fi network.

  6. Rename the product after it has been found and added.

  7. After confirming you can control the product with your smartphone.

To connect your Smartlife account to Amazon Alexa and/or Google
Home, set it up using the”Smart Life” action or skill. For more details check the instruction on either Amazon or Google.

Using the control panel and remote control (image B)

Button Function
Mode indicators B1 Indicates the current fan mode.
Timer button B2 Press to set the timer. Use B4 and B3 to set the

duration of cooling.
Up button B3| Increase values.
Down button B4| Decrease values.
Temperature Indicator B5| Indicates the current temperature.
Power button / Wi-Fi indicator LED B6| Switch the product on or off.
Fan mode button B7| Repeatedly press the button to select the mode: Cooling mode/ Dehumidifying mode/ Fan mode.
Fan speed button B8| Press repeatedly to select the fan speed.
Sleep mode button B9| Activate sleep mode. Only works in cooling mode. After one hour the set
temperature increases 1 ºc and again after 2 hours.
Power button B10| Switch the product on or off.

Declaration of Conformity

We, Nedis B.V. declare as a manufacturer that the product WIFIACMBl WT7 from our brand Nedis’, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/wifiacmb1wt7#support

For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28
5215 MC ‘s-Hertogenbosch, the Netherlands

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals