ULIX Rider Wired Earbuds with Microphone – Wired Earphones with Microphone-Complete Features/Instruction Manual
- June 5, 2024
- UliX
Table of Contents
ULIX Rider Wired Earbuds with Microphone – Wired Earphones with
Microphone
Specifications
- BRAND: UliX
- EAR PLACEMENT: In-Ear
- COLOR: Grey
- CONNECTIVITY TECHNOLOGY: Wired
- CONNECTION: Gold Plated 3.5mm Headphone Jack
- MICROPHONE: Built-in microphone with volume control and call control
- WEIGHT: 16 grams
- FREQUENCY RANGE: 20Hz to 20000Hz
- IMPEDANCE: 48-ohm
- CABLE: Tangle-Free Wire
- SENSITIVITY: 100dB
- CABLE LENGTH: 4.2ft/1.3m
- DRIVER SIZE: 12mm
- MAX INPUT POWER: 5mW
Introduction
We are both your dream and the worst nightmare of our competition. Our company has created speakers with a 48-ohm impedance, not 16, 32, or even 32. This boosts bass significantly and allows the earphones to generate magnificent, crystal-clear sound with more detail. Our powerful sound drivers produce rich sound and deep bass, and the metal headphone housing is ergonomic and built to handle them. You’ll be able to hear all of the instruments as well as the voices. You’ll feel like you’re right there in the storm if you listen to “RIDERs on the Storm.” Internal sound-absorbing holes and a built-in MEMS microphone for noise reduction decrease external noise and boost sound purity for maximum performance even during calls. Conversations in the office, on a call with pals, and during a gaming session are all crystal clear. Thousands of people’s ear canal studies were used by ULIX to design earphones with improved comfort, stability, and passive noise isolation. The cord is silky and robust, with TPE thermoplastic rubber reinforcement. The item is long- lasting and works with Android, Apple, and PC phones.
HOW TO ANSWER A CALL
You should be ready to go after your earbuds have been matched or plugged in. When a call comes in, you’ll be able to answer it by pressing a button on the earbuds. This will connect the call and allow you to continue speaking without having to hold your phone in your hand.
HOW TO TURN ON
Select the headphones from the drop-down menu. Pull down the shade from the top of the phone and long-press the Bluetooth symbol on an Android device. It will immediately take you to the Bluetooth menu, where you may switch it on and then search for devices. To pair your headphones, tap the name of the headphones you’re trying to pair.
Frequently Asked Questions
-
What is the purpose of the button on wired earbuds?
This means that the device has a microphone incorporated into the wire of the headphones, allowing you to answer phone calls or utilize voice commands without having to remove your headphones. -
On wired earbuds, where is the microphone?
The 3.5mm connector on the majority of our wired headphones (with a microphone) has a “TRRS” connection. Take a look at the image below for an example. The Mic Input is on the bottom part of the jack, as you can see. -
Can I make phone calls while wearing earbuds?
Both the iOS and Android operating systems include built-in support for Bluetooth device calling. To receive or make calls on a Bluetooth headset, all you have to do is couple the headset with your phone. -
Is it possible to converse on the phone while using earbuds?
Yes, because wireless earbuds are equipped with high-quality microphones, hands-free controls, and voice assistants, they can be used to make and receive calls. -
Why aren’t my headphones or microphone working?
Why isn’t the microphone on my headset working properly? Make sure your device’s mute button isn’t turned on. Verify that your microphone or headset is properly connected to your computer. Make sure your computer’s default recording device is your microphone or headset. -
Why aren’t my wired headphones working?
Examine your wired headphones for physical damage. You may not be able to hear sounds from your headphones if the audio jack is bent or broken, or the cable is damaged or exposed. Check to see whether your audio jack is twisted. Check to see if your cable is broken. -
Do earbuds have a microphone?
Most modern earbud models include a microphone, and some of the more expensive earbuds have multiple microphones to improve sound quality. The microphone is usually found in the right earbud or in a casing near the wire connecting the two buds. -
Are there speakers in earbuds?
The earphone speaker is similar, with two exceptions: the battery is replaced with an oscillating source (for music and other purposes), and the coil replaces the bulb. That is, of course, just one speaker. Earphones normally contain two speakers, one for each ear. -
What is the best way to test my microphone?
Speak into your microphone to test it. If the volume meter shows green bars, the sound is being picked up appropriately. Select a different microphone from the drop-down option. If you can’t find the microphone you’re looking for, try unplugging and replugging it. -
What is the best way to tell if my earbuds are fully charged?
Examine the earphones’ battery indicator light to determine their state. The case may be charged without the earbuds; once they’re in, both the earbuds and the case will charge at the same time. Charging is indicated by the color red. Green indicates that the battery is fully charged.