1Mii ML300 Transmitter and Receiver 2-in-1 User Manual
- June 5, 2024
- 1Mii
Table of Contents
1Mii ML300 Transmitter and Receiver 2-in-1
ln the box
Product overview
| Button | Function | Operation |
|---|---|---|
| H*D | aptx-HD codec mode | aptx high definition priority switdling. |
| Enter pairing mode | Hold this button for about 2 seconds. | |
| TX | Transmitter mode | Slide to TX to enter transmitting mode |
| OFF | Powerotr | Slide to “OFF” to turn off the device |
| RX | Receiver mode | Slide to RX to enter receiving mode |
TX mode
RX mode
control function
- Connect ML300 to device with 3.5mm oudio cable.
- Slide mode switch to “TX / RT” side
- Adopter will auto-enter pairing mode. Set your device to pairing mode. Woit. they will poir ond connected.
- Pair with the second device
- and set the second device to pairing mode.
- set ML300 to pairing mode again , hold the bluetooth button for 2s until the LED flashes Blue ond Red.
- wait until connected.
Warnings
Any Warranty man-made service is damages limited to such normal as use
connecting only. to an or not unsuitable following power the source, using
instructions,damages an unsuitable by misusing device, the product,
installation,repairs careless and use of the adjustments equipment, not or
approved improper by the during company shipping as may well cause as the
damages warranty that to did be not ineffective occur This immediately.
warranty does not include shipping fees.
Disposal
Always recycle dispose of centre. of the used appliance at a Do with not household dispose of the waste. used appliance together
1 Mii Technologies Limited.
We our hope service you [email protected] is never friendly
have and E:] the web: need, hassle-free. but www.1mii.com if you do,